summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/display/exynos/exynos_hdmi.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/display/exynos/exynos_hdmi.txt')
-rw-r--r--dts/Bindings/display/exynos/exynos_hdmi.txt27
1 files changed, 24 insertions, 3 deletions
diff --git a/dts/Bindings/display/exynos/exynos_hdmi.txt b/dts/Bindings/display/exynos/exynos_hdmi.txt
index d474f59be6..a2ec4c1c93 100644
--- a/dts/Bindings/display/exynos/exynos_hdmi.txt
+++ b/dts/Bindings/display/exynos/exynos_hdmi.txt
@@ -5,6 +5,7 @@ Required properties:
1) "samsung,exynos4210-hdmi"
2) "samsung,exynos4212-hdmi"
3) "samsung,exynos5420-hdmi"
+ 4) "samsung,exynos5433-hdmi"
- reg: physical base address of the hdmi and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
@@ -12,6 +13,11 @@ Required properties:
a) phandle of the gpio controller node.
b) pin number within the gpio controller.
c) optional flags and pull up/down.
+- ddc: phandle to the hdmi ddc node
+- phy: phandle to the hdmi phy node
+- samsung,syscon-phandle: phandle for system controller node for PMU.
+
+Required properties for Exynos 4210, 4212, 5420 and 5433:
- clocks: list of clock IDs from SoC clock driver.
a) hdmi: Gate of HDMI IP bus clock.
b) sclk_hdmi: Gate of HDMI special clock.
@@ -25,9 +31,24 @@ Required properties:
sclk_pixel.
- clock-names: aliases as per driver requirements for above clock IDs:
"hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
-- ddc: phandle to the hdmi ddc node
-- phy: phandle to the hdmi phy node
-- samsung,syscon-phandle: phandle for system controller node for PMU.
+
+Required properties for Exynos 5433:
+- clocks: list of clock specifiers according to common clock bindings.
+ a) hdmi_pclk: Gate of HDMI IP APB bus.
+ b) hdmi_i_pclk: Gate of HDMI-PHY IP APB bus.
+ d) i_tmds_clk: Gate of HDMI TMDS clock.
+ e) i_pixel_clk: Gate of HDMI pixel clock.
+ f) i_spdif_clk: Gate of HDMI SPDIF clock.
+ g) oscclk: Oscillator clock, used as parent of following *_user clocks
+ in case HDMI-PHY is not operational.
+ h) tmds_clko: TMDS clock generated by HDMI-PHY.
+ i) tmds_clko_user: MUX used to switch between oscclk and tmds_clko,
+ respectively if HDMI-PHY is off and operational.
+ j) pixel_clko: Pixel clock generated by HDMI-PHY.
+ k) pixel_clko_user: MUX used to switch between oscclk and pixel_clko,
+ respectively if HDMI-PHY is off and operational.
+- clock-names: aliases for above clock specfiers.
+- samsung,sysreg: handle to syscon used to control the system registers.
Example: