1 files changed, 0 insertions, 57 deletions
diff --git a/dts/Bindings/display/imx/fsl,imx-fb.txt b/dts/Bindings/display/imx/fsl,imx-fb.txt
deleted file mode 100644
index e5a8b363d8..0000000000
--- a/dts/Bindings/display/imx/fsl,imx-fb.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Freescale imx21 Framebuffer
-
-This framebuffer driver supports devices imx1, imx21, imx25, and imx27.
-
-Required properties:
-- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21
-- reg : Should contain 1 register ranges(address and length)
-- interrupts : One interrupt of the fb dev
-
-Required nodes:
-- display: Phandle to a display node as described in
-	Documentation/devicetree/bindings/display/panel/display-timing.txt
-	Additional, the display node has to define properties:
-	- bits-per-pixel: Bits per pixel
-	- fsl,pcr: LCDC PCR value
-	A display node may optionally define
-	- fsl,aus-mode: boolean to enable AUS mode (only for imx21)
-
-Optional properties:
-- lcd-supply: Regulator for LCD supply voltage.
-- fsl,dmacr: DMA Control Register value. This is optional. By default, the
-	register is not modified as recommended by the datasheet.
-- fsl,lpccr: Contrast Control Register value. This property provides the
-	default value for the contrast control register.
-	If that property is omitted, the register is zeroed.
-- fsl,lscr1: LCDC Sharp Configuration Register value.
-
-Example:
-
-	imxfb: fb@10021000 {
-		compatible = "fsl,imx21-fb";
-		interrupts = <61>;
-		reg = <0x10021000 0x1000>;
-		display = <&display0>;
-	};
-
-	...
-
-	display0: display0 {
-		model = "Primeview-PD050VL1";
-		native-mode = <&timing_disp0>;
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
-		display-timings {
-			timing_disp0: 640x480 {
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <112>;
-				hfront-porch = <36>;
-				hsync-len = <32>;
-				vback-porch = <33>;
-				vfront-porch = <33>;
-				vsync-len = <2>;
-				clock-frequency = <25000000>;
-			};
-		};
-	};