diff options
Diffstat (limited to 'dts/Bindings/display/mediatek/mediatek,dpi.txt')
-rw-r--r-- | dts/Bindings/display/mediatek/mediatek,dpi.txt | 35 |
1 files changed, 0 insertions, 35 deletions
diff --git a/dts/Bindings/display/mediatek/mediatek,dpi.txt b/dts/Bindings/display/mediatek/mediatek,dpi.txt deleted file mode 100644 index b6a7e7397b..0000000000 --- a/dts/Bindings/display/mediatek/mediatek,dpi.txt +++ /dev/null @@ -1,35 +0,0 @@ -Mediatek DPI Device -=================== - -The Mediatek DPI function block is a sink of the display subsystem and -provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel -output bus. - -Required properties: -- compatible: "mediatek,<chip>-dpi" -- reg: Physical base address and length of the controller's registers -- interrupts: The interrupt signal from the function block. -- clocks: device clocks - See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- clock-names: must contain "pixel", "engine", and "pll" -- port: Output port node with endpoint definitions as described in - Documentation/devicetree/bindings/graph.txt. This port should be connected - to the input port of an attached HDMI or LVDS encoder chip. - -Example: - -dpi0: dpi@1401d000 { - compatible = "mediatek,mt8173-dpi"; - reg = <0 0x1401d000 0 0x1000>; - interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; - clocks = <&mmsys CLK_MM_DPI_PIXEL>, - <&mmsys CLK_MM_DPI_ENGINE>, - <&apmixedsys CLK_APMIXED_TVDPLL>; - clock-names = "pixel", "engine", "pll"; - - port { - dpi0_out: endpoint { - remote-endpoint = <&hdmi0_in>; - }; - }; -}; |