diff options
Diffstat (limited to 'dts/Bindings/display/msm/mdp5.txt')
-rw-r--r-- | dts/Bindings/display/msm/mdp5.txt | 158 |
1 files changed, 0 insertions, 158 deletions
diff --git a/dts/Bindings/display/msm/mdp5.txt b/dts/Bindings/display/msm/mdp5.txt deleted file mode 100644 index 4e11338548..0000000000 --- a/dts/Bindings/display/msm/mdp5.txt +++ /dev/null @@ -1,158 +0,0 @@ -Qualcomm adreno/snapdragon MDP5 display controller - -Description: - -This is the bindings documentation for the Mobile Display Subsytem(MDSS) that -encapsulates sub-blocks like MDP5, DSI, HDMI, eDP etc, and the MDP5 display -controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996. - -MDSS: -Required properties: -- compatible: - * "qcom,mdss" - MDSS -- reg: Physical base address and length of the controller's registers. -- reg-names: The names of register regions. The following regions are required: - * "mdss_phys" - * "vbif_phys" -- interrupts: The interrupt signal from MDSS. -- interrupt-controller: identifies the node as an interrupt controller. -- #interrupt-cells: specifies the number of cells needed to encode an interrupt - source, should be 1. -- power-domains: a power domain consumer specifier according to - Documentation/devicetree/bindings/power/power_domain.txt -- clocks: device clocks. See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required. - * "iface" - * "bus" - * "vsync" -- #address-cells: number of address cells for the MDSS children. Should be 1. -- #size-cells: Should be 1. -- ranges: parent bus address space is the same as the child bus address space. - -Optional properties: -- clock-names: the following clocks are optional: - * "lut" - -MDP5: -Required properties: -- compatible: - * "qcom,mdp5" - MDP5 -- reg: Physical base address and length of the controller's registers. -- reg-names: The names of register regions. The following regions are required: - * "mdp_phys" -- interrupts: Interrupt line from MDP5 to MDSS interrupt controller. -- clocks: device clocks. See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required. -- * "bus" -- * "iface" -- * "core" -- * "vsync" -- ports: contains the list of output ports from MDP. These connect to interfaces - that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a - special case since it is a part of the MDP block itself). - - Each output port contains an endpoint that describes how it is connected to an - external interface. These are described by the standard properties documented - here: - Documentation/devicetree/bindings/graph.txt - Documentation/devicetree/bindings/media/video-interfaces.txt - - The availability of output ports can vary across SoC revisions: - - For MSM8974 and APQ8084: - Port 0 -> MDP_INTF0 (eDP) - Port 1 -> MDP_INTF1 (DSI1) - Port 2 -> MDP_INTF2 (DSI2) - Port 3 -> MDP_INTF3 (HDMI) - - For MSM8916: - Port 0 -> MDP_INTF1 (DSI1) - - For MSM8994 and MSM8996: - Port 0 -> MDP_INTF1 (DSI1) - Port 1 -> MDP_INTF2 (DSI2) - Port 2 -> MDP_INTF3 (HDMI) - -Optional properties: -- clock-names: the following clocks are optional: - * "lut" - -Example: - -/ { - ... - - mdss: mdss@1a00000 { - compatible = "qcom,mdss"; - reg = <0x1a00000 0x1000>, - <0x1ac8000 0x3000>; - reg-names = "mdss_phys", "vbif_phys"; - - power-domains = <&gcc MDSS_GDSC>; - - clocks = <&gcc GCC_MDSS_AHB_CLK>, - <&gcc GCC_MDSS_AXI_CLK>, - <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "vsync" - - interrupts = <0 72 0>; - - interrupt-controller; - #interrupt-cells = <1>; - - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mdp: mdp@1a01000 { - compatible = "qcom,mdp5"; - reg = <0x1a01000 0x90000>; - reg-names = "mdp_phys"; - - interrupt-parent = <&mdss>; - interrupts = <0 0>; - - clocks = <&gcc GCC_MDSS_AHB_CLK>, - <&gcc GCC_MDSS_AXI_CLK>, - <&gcc GCC_MDSS_MDP_CLK>, - <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "core", - "vsync"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mdp5_intf1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; - }; - }; - - dsi0: dsi@1a98000 { - ... - ports { - ... - port@0 { - reg = <0>; - dsi0_in: endpoint { - remote-endpoint = <&mdp5_intf1_out>; - }; - }; - ... - }; - ... - }; - - dsi_phy0: dsi-phy@1a98300 { - ... - }; - }; -}; |