1 files changed, 160 insertions, 0 deletions
diff --git a/dts/Bindings/display/msm/mdp5.txt b/dts/Bindings/display/msm/mdp5.txt
new file mode 100644
index 0000000000..30c11ea837
--- /dev/null
+++ b/dts/Bindings/display/msm/mdp5.txt
@@ -0,0 +1,160 @@
+Qualcomm adreno/snapdragon MDP5 display controller
+
+Description:
+
+This is the bindings documentation for the Mobile Display Subsytem(MDSS) that
+encapsulates sub-blocks like MDP5, DSI, HDMI, eDP etc, and the MDP5 display
+controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996.
+
+MDSS:
+Required properties:
+- compatible:
+  * "qcom,mdss" - MDSS
+- reg: Physical base address and length of the controller's registers.
+- reg-names: The names of register regions. The following regions are required:
+  * "mdss_phys"
+  * "vbif_phys"
+- interrupts: The interrupt signal from MDSS.
+- interrupt-controller: identifies the node as an interrupt controller.
+- #interrupt-cells: specifies the number of cells needed to encode an interrupt
+  source, should be 1.
+- power-domains: a power domain consumer specifier according to
+  Documentation/devicetree/bindings/power/power_domain.txt
+- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required.
+  * "iface_clk"
+  * "bus_clk"
+  * "vsync_clk"
+- #address-cells: number of address cells for the MDSS children. Should be 1.
+- #size-cells: Should be 1.
+- ranges: parent bus address space is the same as the child bus address space.
+
+Optional properties:
+- clock-names: the following clocks are optional:
+  * "lut_clk"
+
+MDP5:
+Required properties:
+- compatible:
+  * "qcom,mdp5" - MDP5
+- reg: Physical base address and length of the controller's registers.
+- reg-names: The names of register regions. The following regions are required:
+  * "mdp_phys"
+- interrupts: Interrupt line from MDP5 to MDSS interrupt controller.
+- interrupt-parent: phandle to the MDSS block
+  through MDP block
+- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required.
+-   * "bus_clk"
+-   * "iface_clk"
+-   * "core_clk"
+-   * "vsync_clk"
+- ports: contains the list of output ports from MDP. These connect to interfaces
+  that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
+  special case since it is a part of the MDP block itself).
+
+  Each output port contains an endpoint that describes how it is connected to an
+  external interface. These are described by the standard properties documented
+  here:
+	Documentation/devicetree/bindings/graph.txt
+	Documentation/devicetree/bindings/media/video-interfaces.txt
+
+  The availability of output ports can vary across SoC revisions:
+
+  For MSM8974 and APQ8084:
+	 Port 0 -> MDP_INTF0 (eDP)
+	 Port 1 -> MDP_INTF1 (DSI1)
+	 Port 2 -> MDP_INTF2 (DSI2)
+	 Port 3 -> MDP_INTF3 (HDMI)
+
+  For MSM8916:
+	 Port 0 -> MDP_INTF1 (DSI1)
+
+  For MSM8994 and MSM8996:
+	 Port 0 -> MDP_INTF1 (DSI1)
+	 Port 1 -> MDP_INTF2 (DSI2)
+	 Port 2 -> MDP_INTF3 (HDMI)
+
+Optional properties:
+- clock-names: the following clocks are optional:
+  * "lut_clk"
+
+Example:
+
+/ {
+	...
+
+	mdss: mdss@1a00000 {
+		compatible = "qcom,mdss";
+		reg = <0x1a00000 0x1000>,
+		      <0x1ac8000 0x3000>;
+		reg-names = "mdss_phys", "vbif_phys";
+
+		power-domains = <&gcc MDSS_GDSC>;
+
+		clocks = <&gcc GCC_MDSS_AHB_CLK>,
+			 <&gcc GCC_MDSS_AXI_CLK>,
+			 <&gcc GCC_MDSS_VSYNC_CLK>;
+		clock-names = "iface_clk",
+			      "bus_clk",
+			      "vsync_clk"
+
+		interrupts = <0 72 0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mdp: mdp@1a01000 {
+			compatible = "qcom,mdp5";
+			reg = <0x1a01000 0x90000>;
+			reg-names = "mdp_phys";
+
+			interrupt-parent = <&mdss>;
+			interrupts = <0 0>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>;
+			clock-names = "iface_clk",
+				      "bus_clk",
+				      "core_clk",
+				      "vsync_clk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					mdp5_intf1_out: endpoint {
+						remote-endpoint = <&dsi0_in>;
+					};
+				};
+			};
+		};
+
+		dsi0: dsi@1a98000 {
+			...
+			ports {
+				...
+				port@0 {
+					reg = <0>;
+					dsi0_in: endpoint {
+						remote-endpoint = <&mdp5_intf1_out>;
+					};
+				};
+				...
+			};
+			...
+		};
+
+		dsi_phy0: dsi-phy@1a98300 {
+			...
+		};
+	};
+};