diff options
Diffstat (limited to 'dts/Bindings/display/panel/koe,tx14d24vm1bpa.txt')
| -rw-r--r-- | dts/Bindings/display/panel/koe,tx14d24vm1bpa.txt | 42 |
1 files changed, 0 insertions, 42 deletions
diff --git a/dts/Bindings/display/panel/koe,tx14d24vm1bpa.txt b/dts/Bindings/display/panel/koe,tx14d24vm1bpa.txt deleted file mode 100644 index be7ac66680..0000000000 --- a/dts/Bindings/display/panel/koe,tx14d24vm1bpa.txt +++ /dev/null @@ -1,42 +0,0 @@ -Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel - -Required properties: -- compatible: should be "koe,tx14d24vm1bpa" -- backlight: phandle of the backlight device attached to the panel -- power-supply: single regulator to provide the supply voltage - -Required nodes: -- port: Parallel port mapping to connect this display - -This panel needs single power supply voltage. Its backlight is conntrolled -via PWM signal. - -Example: --------- - -Example device-tree definition when connected to iMX53 based board - - lcd_panel: lcd-panel { - compatible = "koe,tx14d24vm1bpa"; - backlight = <&backlight_lcd>; - power-supply = <®_3v3>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; - -Then one needs to extend the dispX node: - - lcd_display: disp1 { - - port@1 { - reg = <1>; - - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; - }; |