diff options
Diffstat (limited to 'dts/Bindings/display/panel/panel-lvds.txt')
| -rw-r--r-- | dts/Bindings/display/panel/panel-lvds.txt | 121 |
1 files changed, 0 insertions, 121 deletions
diff --git a/dts/Bindings/display/panel/panel-lvds.txt b/dts/Bindings/display/panel/panel-lvds.txt deleted file mode 100644 index 250850a215..0000000000 --- a/dts/Bindings/display/panel/panel-lvds.txt +++ /dev/null @@ -1,121 +0,0 @@ -LVDS Display Panel -================== - -LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple -incompatible data link layers have been used over time to transmit image data -to LVDS panels. This bindings supports display panels compatible with the -following specifications. - -[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February -1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA) -[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National -Semiconductor -[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video -Electronics Standards Association (VESA) - -Device compatible with those specifications have been marketed under the -FPD-Link and FlatLink brands. - - -Required properties: - -- compatible: Shall contain "panel-lvds" in addition to a mandatory - panel-specific compatible string defined in individual panel bindings. The - "panel-lvds" value shall never be used on its own. -- width-mm: See panel-common.txt. -- height-mm: See panel-common.txt. -- data-mapping: The color signals mapping order, "jeida-18", "jeida-24" - or "vesa-24". - -Optional properties: - -- label: See panel-common.txt. -- gpios: See panel-common.txt. -- backlight: See panel-common.txt. -- power-supply: See panel-common.txt. -- data-mirror: If set, reverse the bit order described in the data mappings - below on all data lanes, transmitting bits for slots 6 to 0 instead of - 0 to 6. - -Required nodes: - -- panel-timing: See panel-common.txt. -- ports: See panel-common.txt. These bindings require a single port subnode - corresponding to the panel LVDS input. - - -LVDS data mappings are defined as follows. - -- "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and - [VESA] specifications. Data are transferred as follows on 3 LVDS lanes. - -Slot 0 1 2 3 4 5 6 - ________________ _________________ -Clock \_______________________/ - ______ ______ ______ ______ ______ ______ ______ -DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__>< -DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__>< -DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__>< - -- "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI] - specifications. Data are transferred as follows on 4 LVDS lanes. - -Slot 0 1 2 3 4 5 6 - ________________ _________________ -Clock \_______________________/ - ______ ______ ______ ______ ______ ______ ______ -DATA0 ><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__>< -DATA1 ><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__>< -DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__>< -DATA3 ><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__>< - -- "vesa-24" - 24-bit data mapping compatible with the [VESA] specification. - Data are transferred as follows on 4 LVDS lanes. - -Slot 0 1 2 3 4 5 6 - ________________ _________________ -Clock \_______________________/ - ______ ______ ______ ______ ______ ______ ______ -DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__>< -DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__>< -DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__>< -DATA3 ><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__>< - -Control signals are mapped as follows. - -CTL0: HSync -CTL1: VSync -CTL2: Data Enable -CTL3: 0 - - -Example -------- - -panel { - compatible = "mitsubishi,aa121td01", "panel-lvds"; - - width-mm = <261>; - height-mm = <163>; - - data-mapping = "jeida-24"; - - panel-timing { - /* 1280x800 @60Hz */ - clock-frequency = <71000000>; - hactive = <1280>; - vactive = <800>; - hsync-len = <70>; - hfront-porch = <20>; - hback-porch = <70>; - vsync-len = <5>; - vfront-porch = <3>; - vback-porch = <15>; - }; - - port { - panel_in: endpoint { - remote-endpoint = <&lvds_encoder>; - }; - }; -}; |