diff options
Diffstat (limited to 'dts/Bindings/display/panel/panel-lvds.txt')
| -rw-r--r-- | dts/Bindings/display/panel/panel-lvds.txt | 120 |
1 files changed, 120 insertions, 0 deletions
diff --git a/dts/Bindings/display/panel/panel-lvds.txt b/dts/Bindings/display/panel/panel-lvds.txt new file mode 100644 index 0000000000..b938269f84 --- /dev/null +++ b/dts/Bindings/display/panel/panel-lvds.txt @@ -0,0 +1,120 @@ +LVDS Display Panel +================== + +LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple +incompatible data link layers have been used over time to transmit image data +to LVDS panels. This bindings supports display panels compatible with the +following specifications. + +[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February +1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA) +[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National +Semiconductor +[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video +Electronics Standards Association (VESA) + +Device compatible with those specifications have been marketed under the +FPD-Link and FlatLink brands. + + +Required properties: + +- compatible: Shall contain "panel-lvds" in addition to a mandatory + panel-specific compatible string defined in individual panel bindings. The + "panel-lvds" value shall never be used on its own. +- width-mm: See panel-common.txt. +- height-mm: See panel-common.txt. +- data-mapping: The color signals mapping order, "jeida-18", "jeida-24" + or "vesa-24". + +Optional properties: + +- label: See panel-common.txt. +- gpios: See panel-common.txt. +- backlight: See panel-common.txt. +- data-mirror: If set, reverse the bit order described in the data mappings + below on all data lanes, transmitting bits for slots 6 to 0 instead of + 0 to 6. + +Required nodes: + +- panel-timing: See panel-common.txt. +- ports: See panel-common.txt. These bindings require a single port subnode + corresponding to the panel LVDS input. + + +LVDS data mappings are defined as follows. + +- "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and + [VESA] specifications. Data are transferred as follows on 3 LVDS lanes. + +Slot 0 1 2 3 4 5 6 + ________________ _________________ +Clock \_______________________/ + ______ ______ ______ ______ ______ ______ ______ +DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__>< +DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__>< +DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__>< + +- "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI] + specifications. Data are transferred as follows on 4 LVDS lanes. + +Slot 0 1 2 3 4 5 6 + ________________ _________________ +Clock \_______________________/ + ______ ______ ______ ______ ______ ______ ______ +DATA0 ><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__>< +DATA1 ><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__>< +DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__>< +DATA3 ><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__>< + +- "vesa-24" - 24-bit data mapping compatible with the [VESA] specification. + Data are transferred as follows on 4 LVDS lanes. + +Slot 0 1 2 3 4 5 6 + ________________ _________________ +Clock \_______________________/ + ______ ______ ______ ______ ______ ______ ______ +DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__>< +DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__>< +DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__>< +DATA3 ><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__>< + +Control signals are mapped as follows. + +CTL0: HSync +CTL1: VSync +CTL2: Data Enable +CTL3: 0 + + +Example +------- + +panel { + compatible = "mitsubishi,aa121td01", "panel-lvds"; + + width-mm = <261>; + height-mm = <163>; + + data-mapping = "jeida-24"; + + panel-timing { + /* 1280x800 @60Hz */ + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hsync-len = <70>; + hfront-porch = <20>; + hback-porch = <70>; + vsync-len = <5>; + vfront-porch = <3>; + vback-porch = <15>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_encoder>; + }; + }; +}; |