summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/display/panel/sharp,lq150x1lg11.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/display/panel/sharp,lq150x1lg11.txt')
-rw-r--r--dts/Bindings/display/panel/sharp,lq150x1lg11.txt36
1 files changed, 0 insertions, 36 deletions
diff --git a/dts/Bindings/display/panel/sharp,lq150x1lg11.txt b/dts/Bindings/display/panel/sharp,lq150x1lg11.txt
deleted file mode 100644
index 0f57c31435..0000000000
--- a/dts/Bindings/display/panel/sharp,lq150x1lg11.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Sharp 15" LQ150X1LG11 XGA TFT LCD panel
-
-Required properties:
-- compatible: should be "sharp,lq150x1lg11"
-- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
-
-Optional properties:
-- backlight: phandle of the backlight device
-- rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin.
-- sellvds-gpios: a single GPIO for the SELLVDS pin.
-
-If rlud-gpios and/or sellvds-gpios are not specified, the RL/UD and/or SELLVDS
-pins are assumed to be handled appropriately by the hardware.
-
-Example:
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 100000>; /* VBR */
-
- brightness-levels = <0 20 40 60 80 100>;
- default-brightness-level = <2>;
-
- power-supply = <&vdd_12v_reg>; /* VDD */
- enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; /* XSTABY */
- };
-
- panel {
- compatible = "sharp,lq150x1lg11";
-
- power-supply = <&vcc_3v3_reg>; /* VCC */
-
- backlight = <&backlight>;
- rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* RL/UD */
- sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */
- };