diff options
Diffstat (limited to 'dts/Bindings/display/panel/simple-panel.txt')
| -rw-r--r-- | dts/Bindings/display/panel/simple-panel.txt | 29 |
1 files changed, 1 insertions, 28 deletions
diff --git a/dts/Bindings/display/panel/simple-panel.txt b/dts/Bindings/display/panel/simple-panel.txt index b2b872c710..e11208fb7d 100644 --- a/dts/Bindings/display/panel/simple-panel.txt +++ b/dts/Bindings/display/panel/simple-panel.txt @@ -1,28 +1 @@ -Simple display panel -==================== - -panel node ----------- - -Required properties: -- power-supply: See panel-common.txt - -Optional properties: -- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing -- enable-gpios: GPIO pin to enable or disable the panel -- backlight: phandle of the backlight device attached to the panel -- no-hpd: This panel is supposed to communicate that it's ready via HPD - (hot plug detect) signal, but the signal isn't hooked up so we should - hardcode the max delay from the panel spec when powering up the panel. - -Example: - - panel: panel { - compatible = "cptt,claa101wb01"; - ddc-i2c-bus = <&panelddc>; - - power-supply = <&vdd_pnl_reg>; - enable-gpios = <&gpio 90 0>; - - backlight = <&backlight>; - }; +See panel-common.yaml in this directory. |