diff options
Diffstat (limited to 'dts/Bindings/display/panel/sitronix,st7789v.txt')
| -rw-r--r-- | dts/Bindings/display/panel/sitronix,st7789v.txt | 37 |
1 files changed, 0 insertions, 37 deletions
diff --git a/dts/Bindings/display/panel/sitronix,st7789v.txt b/dts/Bindings/display/panel/sitronix,st7789v.txt deleted file mode 100644 index c6995dde64..0000000000 --- a/dts/Bindings/display/panel/sitronix,st7789v.txt +++ /dev/null @@ -1,37 +0,0 @@ -Sitronix ST7789V RGB panel with SPI control bus - -Required properties: - - compatible: "sitronix,st7789v" - - reg: Chip select of the panel on the SPI bus - - reset-gpios: a GPIO phandle for the reset pin - - power-supply: phandle of the regulator that provides the supply voltage - -Optional properties: - - backlight: phandle to the backlight used - -The generic bindings for the SPI slaves documented in [1] also applies - -The device node can contain one 'port' child node with one child -'endpoint' node, according to the bindings defined in [2]. This -node should describe panel's video bus. - -[1]: Documentation/devicetree/bindings/spi/spi-bus.txt -[2]: Documentation/devicetree/bindings/graph.txt - -Example: - -panel@0 { - compatible = "sitronix,st7789v"; - reg = <0>; - reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>; - backlight = <&pwm_bl>; - spi-max-frequency = <100000>; - spi-cpol; - spi-cpha; - - port { - panel_input: endpoint { - remote-endpoint = <&tcon0_out_panel>; - }; - }; -}; |