summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/display/panel
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/display/panel')
-rw-r--r--dts/Bindings/display/panel/auo,g070vvn01.txt29
-rw-r--r--dts/Bindings/display/panel/boe,hv070wsa-100.txt28
-rw-r--r--dts/Bindings/display/panel/dataimage,scf0700c48ggu18.txt8
-rw-r--r--dts/Bindings/display/panel/dlc,dlc0700yzg-1.txt13
-rw-r--r--dts/Bindings/display/panel/edt,et-series.txt39
-rw-r--r--dts/Bindings/display/panel/edt,et070080dh6.txt10
-rw-r--r--dts/Bindings/display/panel/edt,etm0700g0dh6.txt10
-rw-r--r--dts/Bindings/display/panel/ilitek,ili9881c.txt20
-rw-r--r--dts/Bindings/display/panel/innolux,g070y2-l01.txt12
-rw-r--r--dts/Bindings/display/panel/innolux,p097pfg.txt24
-rw-r--r--dts/Bindings/display/panel/innolux,tv123wam.txt20
-rw-r--r--dts/Bindings/display/panel/kingdisplay,kd097d04.txt22
-rw-r--r--dts/Bindings/display/panel/newhaven,nhd-4.3-480272ef-atxl.txt (renamed from dts/Bindings/display/panel/edt,et057090dhu.txt)4
-rw-r--r--dts/Bindings/display/panel/rocktech,rk070er9427.txt25
-rw-r--r--dts/Bindings/display/panel/sharp,lq035q7db03.txt12
15 files changed, 254 insertions, 22 deletions
diff --git a/dts/Bindings/display/panel/auo,g070vvn01.txt b/dts/Bindings/display/panel/auo,g070vvn01.txt
new file mode 100644
index 0000000000..49e4105378
--- /dev/null
+++ b/dts/Bindings/display/panel/auo,g070vvn01.txt
@@ -0,0 +1,29 @@
+AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,g070vvn01"
+- backlight: phandle of the backlight device attached to the panel
+- power-supply: single regulator to provide the supply voltage
+
+Required nodes:
+- port: Parallel port mapping to connect this display
+
+This panel needs single power supply voltage. Its backlight is conntrolled
+via PWM signal.
+
+Example:
+--------
+
+Example device-tree definition when connected to iMX6Q based board
+
+ lcd_panel: lcd-panel {
+ compatible = "auo,g070vvn01";
+ backlight = <&backlight_lcd>;
+ power-supply = <&reg_display>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
diff --git a/dts/Bindings/display/panel/boe,hv070wsa-100.txt b/dts/Bindings/display/panel/boe,hv070wsa-100.txt
new file mode 100644
index 0000000000..55183d3600
--- /dev/null
+++ b/dts/Bindings/display/panel/boe,hv070wsa-100.txt
@@ -0,0 +1,28 @@
+BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "boe,hv070wsa-100"
+- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
+- enable-gpios: GPIO pin to enable and disable panel (active high)
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in [1]. This
+node should describe panel's video bus.
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+ panel: panel {
+ compatible = "boe,hv070wsa-100";
+ power-supply = <&vcc_3v3_reg>;
+ enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
+ port {
+ panel_ep: endpoint {
+ remote-endpoint = <&bridge_out_ep>;
+ };
+ };
+ };
diff --git a/dts/Bindings/display/panel/dataimage,scf0700c48ggu18.txt b/dts/Bindings/display/panel/dataimage,scf0700c48ggu18.txt
new file mode 100644
index 0000000000..897085ee3c
--- /dev/null
+++ b/dts/Bindings/display/panel/dataimage,scf0700c48ggu18.txt
@@ -0,0 +1,8 @@
+DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface.
+
+Required properties:
+- compatible: should be "dataimage,scf0700c48ggu18"
+- power-supply: as specified in the base binding
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/dlc,dlc0700yzg-1.txt b/dts/Bindings/display/panel/dlc,dlc0700yzg-1.txt
new file mode 100644
index 0000000000..bf06bb025b
--- /dev/null
+++ b/dts/Bindings/display/panel/dlc,dlc0700yzg-1.txt
@@ -0,0 +1,13 @@
+DLC Display Co. DLC0700YZG-1 7.0" WSVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "dlc,dlc0700yzg-1"
+- power-supply: See simple-panel.txt
+
+Optional properties:
+- reset-gpios: See panel-common.txt
+- enable-gpios: See simple-panel.txt
+- backlight: See simple-panel.txt
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/edt,et-series.txt b/dts/Bindings/display/panel/edt,et-series.txt
new file mode 100644
index 0000000000..f56b99ebd9
--- /dev/null
+++ b/dts/Bindings/display/panel/edt,et-series.txt
@@ -0,0 +1,39 @@
+Emerging Display Technology Corp. Displays
+==========================================
+
+
+Display bindings for EDT Display Technology Corp. Displays which are
+compatible with the simple-panel binding, which is specified in
+simple-panel.txt
+
+
+5,7" WVGA TFT Panels
+--------------------
+
++-----------------+---------------------+-------------------------------------+
+| Identifier | compatbile | description |
++=================+=====================+=====================================+
+| ET057090DHU | edt,et057090dhu | 5.7" VGA TFT LCD panel |
++-----------------+---------------------+-------------------------------------+
+
+
+7,0" WVGA TFT Panels
+--------------------
+
++-----------------+---------------------+-------------------------------------+
+| Identifier | compatbile | description |
++=================+=====================+=====================================+
+| ETM0700G0DH6 | edt,etm070080dh6 | WVGA TFT Display with capacitive |
+| | | Touchscreen |
++-----------------+---------------------+-------------------------------------+
+| ETM0700G0BDH6 | edt,etm070080bdh6 | Same as ETM0700G0DH6 but with |
+| | | inverted pixel clock. |
++-----------------+---------------------+-------------------------------------+
+| ETM0700G0EDH6 | edt,etm070080edh6 | Same display as the ETM0700G0BDH6, |
+| | | but with changed Hardware for the |
+| | | backlight and the touch interface |
++-----------------+---------------------+-------------------------------------+
+| ET070080DH6 | edt,etm070080dh6 | Same timings as the ETM0700G0DH6, |
+| | | but with resistive touch. |
++-----------------+---------------------+-------------------------------------+
+
diff --git a/dts/Bindings/display/panel/edt,et070080dh6.txt b/dts/Bindings/display/panel/edt,et070080dh6.txt
deleted file mode 100644
index 20cb38e836..0000000000
--- a/dts/Bindings/display/panel/edt,et070080dh6.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Emerging Display Technology Corp. ET070080DH6 7.0" WVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "edt,et070080dh6"
-
-This panel is the same as ETM0700G0DH6 except for the touchscreen.
-ET070080DH6 is the model with resistive touch.
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/edt,etm0700g0dh6.txt b/dts/Bindings/display/panel/edt,etm0700g0dh6.txt
deleted file mode 100644
index ee4b18053e..0000000000
--- a/dts/Bindings/display/panel/edt,etm0700g0dh6.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Emerging Display Technology Corp. ETM0700G0DH6 7.0" WVGA TFT LCD panel
-
-Required properties:
-- compatible: should be "edt,etm0700g0dh6"
-
-This panel is the same as ET070080DH6 except for the touchscreen.
-ETM0700G0DH6 is the model with capacitive multitouch.
-
-This binding is compatible with the simple-panel binding, which is specified
-in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/ilitek,ili9881c.txt b/dts/Bindings/display/panel/ilitek,ili9881c.txt
new file mode 100644
index 0000000000..4a041acb4e
--- /dev/null
+++ b/dts/Bindings/display/panel/ilitek,ili9881c.txt
@@ -0,0 +1,20 @@
+Ilitek ILI9881c based MIPI-DSI panels
+
+Required properties:
+ - compatible: must be "ilitek,ili9881c" and one of:
+ * "bananapi,lhr050h41"
+ - reg: DSI virtual channel used by that screen
+ - power-supply: phandle to the power regulator
+ - reset-gpios: a GPIO phandle for the reset pin
+
+Optional properties:
+ - backlight: phandle to the backlight used
+
+Example:
+panel@0 {
+ compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
+ reg = <0>;
+ power-supply = <&reg_display>;
+ reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+ backlight = <&pwm_bl>;
+};
diff --git a/dts/Bindings/display/panel/innolux,g070y2-l01.txt b/dts/Bindings/display/panel/innolux,g070y2-l01.txt
new file mode 100644
index 0000000000..7c234cf68e
--- /dev/null
+++ b/dts/Bindings/display/panel/innolux,g070y2-l01.txt
@@ -0,0 +1,12 @@
+Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,g070y2-l01"
+- power-supply: as specified in the base binding
+
+Optional properties:
+- backlight: as specified in the base binding
+- enable-gpios: as specified in the base binding
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/innolux,p097pfg.txt b/dts/Bindings/display/panel/innolux,p097pfg.txt
new file mode 100644
index 0000000000..595d9dfeff
--- /dev/null
+++ b/dts/Bindings/display/panel/innolux,p097pfg.txt
@@ -0,0 +1,24 @@
+Innolux P097PFG 9.7" 1536x2048 TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,p097pfg"
+- reg: DSI virtual channel of the peripheral
+- avdd-supply: phandle of the regulator that provides positive voltage
+- avee-supply: phandle of the regulator that provides negative voltage
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+ &mipi_dsi {
+ panel {
+ compatible = "innolux,p079zca";
+ reg = <0>;
+ avdd-supply = <...>;
+ avee-supply = <...>;
+ backlight = <&backlight>;
+ enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/dts/Bindings/display/panel/innolux,tv123wam.txt b/dts/Bindings/display/panel/innolux,tv123wam.txt
new file mode 100644
index 0000000000..a9b35265fa
--- /dev/null
+++ b/dts/Bindings/display/panel/innolux,tv123wam.txt
@@ -0,0 +1,20 @@
+Innolux TV123WAM 12.3 inch eDP 2K display panel
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
+
+Required properties:
+- compatible: should be "innolux,tv123wam"
+- power-supply: regulator to provide the supply voltage
+
+Optional properties:
+- enable-gpios: GPIO pin to enable or disable the panel
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+ panel_edp: panel-edp {
+ compatible = "innolux,tv123wam";
+ enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>;
+ power-supply = <&pm8916_l2>;
+ backlight = <&backlight>;
+ };
diff --git a/dts/Bindings/display/panel/kingdisplay,kd097d04.txt b/dts/Bindings/display/panel/kingdisplay,kd097d04.txt
new file mode 100644
index 0000000000..164a5fa236
--- /dev/null
+++ b/dts/Bindings/display/panel/kingdisplay,kd097d04.txt
@@ -0,0 +1,22 @@
+Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel
+
+Required properties:
+- compatible: should be "kingdisplay,kd097d04"
+- reg: DSI virtual channel of the peripheral
+- power-supply: phandle of the regulator that provides the supply voltage
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+ &mipi_dsi {
+ panel {
+ compatible = "kingdisplay,kd097d04";
+ reg = <0>;
+ power-supply = <...>;
+ backlight = <&backlight>;
+ enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/dts/Bindings/display/panel/edt,et057090dhu.txt b/dts/Bindings/display/panel/newhaven,nhd-4.3-480272ef-atxl.txt
index 4903d7b1d9..e78292b1a1 100644
--- a/dts/Bindings/display/panel/edt,et057090dhu.txt
+++ b/dts/Bindings/display/panel/newhaven,nhd-4.3-480272ef-atxl.txt
@@ -1,7 +1,7 @@
-Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
+Newhaven Display International 480 x 272 TFT LCD panel
Required properties:
-- compatible: should be "edt,et057090dhu"
+- compatible: should be "newhaven,nhd-4.3-480272ef-atxl"
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/rocktech,rk070er9427.txt b/dts/Bindings/display/panel/rocktech,rk070er9427.txt
new file mode 100644
index 0000000000..eb1fb9f8d1
--- /dev/null
+++ b/dts/Bindings/display/panel/rocktech,rk070er9427.txt
@@ -0,0 +1,25 @@
+Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
+
+Required properties:
+- compatible: should be "rocktech,rk070er9427"
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Optional nodes:
+- Video port for LCD panel input.
+
+Example:
+ panel {
+ compatible = "rocktech,rk070er9427";
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
diff --git a/dts/Bindings/display/panel/sharp,lq035q7db03.txt b/dts/Bindings/display/panel/sharp,lq035q7db03.txt
new file mode 100644
index 0000000000..0753f69672
--- /dev/null
+++ b/dts/Bindings/display/panel/sharp,lq035q7db03.txt
@@ -0,0 +1,12 @@
+Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "sharp,lq035q7db03"
+- power-supply: phandle of the regulator that provides the supply voltage
+
+Optional properties:
+- enable-gpios: GPIO pin to enable or disable the panel
+- backlight: phandle of the backlight device attached to the panel
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-19 04:36:19 +0000