9 files changed, 113 insertions, 3 deletions
diff --git a/dts/Bindings/display/panel/feiyang,fy07024di26a30d.txt b/dts/Bindings/display/panel/feiyang,fy07024di26a30d.txt
new file mode 100644
index 0000000000..82caa7b65a
--- /dev/null
+++ b/dts/Bindings/display/panel/feiyang,fy07024di26a30d.txt
@@ -0,0 +1,20 @@
+Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel
+
+Required properties:
+- compatible: must be "feiyang,fy07024di26a30d"
+- reg: DSI virtual channel used by that screen
+- avdd-supply: analog regulator dc1 switch
+- dvdd-supply: 3v3 digital regulator
+- reset-gpios: a GPIO phandle for the reset pin
+
+Optional properties:
+- backlight: phandle for the backlight control.
+
+panel@0 {
+	compatible = "feiyang,fy07024di26a30d";
+	reg = <0>;
+	avdd-supply = <&reg_dc1sw>;
+	dvdd-supply = <&reg_dldo2>;
+	reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+	backlight = <&backlight>;
+};
diff --git a/dts/Bindings/display/panel/innolux,p079zca.txt b/dts/Bindings/display/panel/innolux,p079zca.txt
index d0f5516157..3ab8c7412c 100644
--- a/dts/Bindings/display/panel/innolux,p079zca.txt
+++ b/dts/Bindings/display/panel/innolux,p079zca.txt
@@ -12,7 +12,7 @@ Optional properties:
 Example:
 
 	&mipi_dsi {
-		panel {
+		panel@0 {
 			compatible = "innolux,p079zca";
 			reg = <0>;
 			power-supply = <...>;
diff --git a/dts/Bindings/display/panel/innolux,p097pfg.txt b/dts/Bindings/display/panel/innolux,p097pfg.txt
index 595d9dfeff..d1cab3a8f0 100644
--- a/dts/Bindings/display/panel/innolux,p097pfg.txt
+++ b/dts/Bindings/display/panel/innolux,p097pfg.txt
@@ -13,7 +13,7 @@ Optional properties:
 Example:
 
 	&mipi_dsi {
-		panel {
+		panel@0 {
 			compatible = "innolux,p079zca";
 			reg = <0>;
 			avdd-supply = <...>;
diff --git a/dts/Bindings/display/panel/kingdisplay,kd097d04.txt b/dts/Bindings/display/panel/kingdisplay,kd097d04.txt
index 164a5fa236..cfefff6886 100644
--- a/dts/Bindings/display/panel/kingdisplay,kd097d04.txt
+++ b/dts/Bindings/display/panel/kingdisplay,kd097d04.txt
@@ -12,7 +12,7 @@ Optional properties:
 Example:
 
 	&mipi_dsi {
-		panel {
+		panel@0 {
 			compatible = "kingdisplay,kd097d04";
 			reg = <0>;
 			power-supply = <...>;
diff --git a/dts/Bindings/display/panel/lg,acx467akm-7.txt b/dts/Bindings/display/panel/lg,acx467akm-7.txt
new file mode 100644
index 0000000000..fc1e1b325e
--- /dev/null
+++ b/dts/Bindings/display/panel/lg,acx467akm-7.txt
@@ -0,0 +1,7 @@
+LG ACX467AKM-7 4.95" 1080×1920 LCD Panel
+
+Required properties:
+- compatible: must be "lg,acx467akm-7"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/osddisplays,osd070t1718-19ts.txt b/dts/Bindings/display/panel/osddisplays,osd070t1718-19ts.txt
new file mode 100644
index 0000000000..e57883ccdf
--- /dev/null
+++ b/dts/Bindings/display/panel/osddisplays,osd070t1718-19ts.txt
@@ -0,0 +1,12 @@
+OSD Displays OSD070T1718-19TS 7" WVGA TFT LCD panel
+
+Required properties:
+- compatible: shall be "osddisplays,osd070t1718-19ts"
+- power-supply: see simple-panel.txt
+
+Optional properties:
+- backlight: see simple-panel.txt
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory. No other simple-panel properties than
+the ones specified herein are valid.
diff --git a/dts/Bindings/display/panel/rocktech,jh057n00900.txt b/dts/Bindings/display/panel/rocktech,jh057n00900.txt
new file mode 100644
index 0000000000..1b5763200c
--- /dev/null
+++ b/dts/Bindings/display/panel/rocktech,jh057n00900.txt
@@ -0,0 +1,18 @@
+Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel
+
+Required properties:
+- compatible: should be "rocktech,jh057n00900"
+- reg: DSI virtual channel of the peripheral
+- reset-gpios: panel reset gpio
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+	&mipi_dsi {
+		panel@0 {
+			compatible = "rocktech,jh057n00900";
+			reg = <0>;
+			backlight = <&backlight>;
+			reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+		};
+	};
diff --git a/dts/Bindings/display/panel/ronbo,rb070d30.yaml b/dts/Bindings/display/panel/ronbo,rb070d30.yaml
new file mode 100644
index 0000000000..0e7987f1cd
--- /dev/null
+++ b/dts/Bindings/display/panel/ronbo,rb070d30.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR X11)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ronbo,rb070d30.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ronbo RB070D30 DSI Display Panel
+
+maintainers:
+  - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+  compatible:
+    const: ronbo,rb070d30
+
+  reg:
+    description: MIPI-DSI virtual channel
+
+  power-gpios:
+    description: GPIO used for the power pin
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO used for the reset pin
+    maxItems: 1
+
+  shlr-gpios:
+    description: GPIO used for the shlr pin (horizontal flip)
+    maxItems: 1
+
+  updn-gpios:
+    description: GPIO used for the updn pin (vertical flip)
+    maxItems: 1
+
+  vcc-lcd-supply:
+    description: Power regulator
+
+  backlight:
+    description: Backlight used by the panel
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+
+required:
+  - compatible
+  - power-gpios
+  - reg
+  - reset-gpios
+  - shlr-gpios
+  - updn-gpios
+  - vcc-lcd-supply
+
+additionalProperties: false
diff --git a/dts/Bindings/display/panel/tpo,td028ttec1.txt b/dts/Bindings/display/panel/tpo,td028ttec1.txt
index ed34253d9f..898e06ecf4 100644
--- a/dts/Bindings/display/panel/tpo,td028ttec1.txt
+++ b/dts/Bindings/display/panel/tpo,td028ttec1.txt
@@ -6,6 +6,7 @@ Required properties:
 
 Optional properties:
 - label: a symbolic name for the panel
+- backlight: phandle of the backlight device
 
 Required nodes:
 - Video port for DPI input
@@ -21,6 +22,7 @@ lcd-panel: td028ttec1@0 {
 	spi-cpha;
 
 	label = "lcd";
+	backlight = <&backlight>;
 	port {
 		lcd_in: endpoint {
 			remote-endpoint = <&dpi_out>;