7 files changed, 79 insertions, 0 deletions
diff --git a/dts/Bindings/display/panel/auo,g133han01.txt b/dts/Bindings/display/panel/auo,g133han01.txt
new file mode 100644
index 0000000000..3afc767478
--- /dev/null
+++ b/dts/Bindings/display/panel/auo,g133han01.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,g133han01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/auo,g185han01.txt b/dts/Bindings/display/panel/auo,g185han01.txt
new file mode 100644
index 0000000000..ed657c2141
--- /dev/null
+++ b/dts/Bindings/display/panel/auo,g185han01.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,g185han01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/auo,t215hvn01.txt b/dts/Bindings/display/panel/auo,t215hvn01.txt
new file mode 100644
index 0000000000..cbd9da3f03
--- /dev/null
+++ b/dts/Bindings/display/panel/auo,t215hvn01.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,t215hvn01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/chunghwa,claa070wp03xg.txt b/dts/Bindings/display/panel/chunghwa,claa070wp03xg.txt
new file mode 100644
index 0000000000..dd22685d2a
--- /dev/null
+++ b/dts/Bindings/display/panel/chunghwa,claa070wp03xg.txt
@@ -0,0 +1,7 @@
+Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "chunghwa,claa070wp03xg"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/display-timing.txt b/dts/Bindings/display/panel/display-timing.txt
index e1d4a0b596..81a75893d1 100644
--- a/dts/Bindings/display/panel/display-timing.txt
+++ b/dts/Bindings/display/panel/display-timing.txt
@@ -32,6 +32,14 @@ optional properties:
 			- active low  = drive pixel data on falling edge/
 					sample data on rising edge
 			- ignored     = ignored
+ - syncclk-active: with
+			- active high = drive sync on rising edge/
+					sample sync on falling edge of pixel
+					clock
+			- active low  = drive sync on falling edge/
+					sample sync on rising edge of pixel
+					clock
+			- omitted     = same configuration as pixelclk-active
  - interlaced (bool): boolean to enable interlaced mode
  - doublescan (bool): boolean to enable doublescan mode
  - doubleclk (bool): boolean to enable doubleclock mode
diff --git a/dts/Bindings/display/panel/nvd,9128.txt b/dts/Bindings/display/panel/nvd,9128.txt
new file mode 100644
index 0000000000..17bcd017c6
--- /dev/null
+++ b/dts/Bindings/display/panel/nvd,9128.txt
@@ -0,0 +1,7 @@
+New Vision Display 7.0" 800 RGB x 480 TFT LCD panel
+
+Required properties:
+- compatible: should be "nvd,9128"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/sharp,lq150x1lg11.txt b/dts/Bindings/display/panel/sharp,lq150x1lg11.txt
new file mode 100644
index 0000000000..0f57c31435
--- /dev/null
+++ b/dts/Bindings/display/panel/sharp,lq150x1lg11.txt
@@ -0,0 +1,36 @@
+Sharp 15" LQ150X1LG11 XGA TFT LCD panel
+
+Required properties:
+- compatible: should be "sharp,lq150x1lg11"
+- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
+
+Optional properties:
+- backlight: phandle of the backlight device
+- rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin.
+- sellvds-gpios: a single GPIO for the SELLVDS pin.
+
+If rlud-gpios and/or sellvds-gpios are not specified, the RL/UD and/or SELLVDS
+pins are assumed to be handled appropriately by the hardware.
+
+Example:
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 100000>;                      /* VBR */
+
+		brightness-levels = <0 20 40 60 80 100>;
+		default-brightness-level = <2>;
+
+		power-supply = <&vdd_12v_reg>;               /* VDD */
+		enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;  /* XSTABY */
+	};
+
+	panel {
+		compatible = "sharp,lq150x1lg11";
+
+		power-supply = <&vcc_3v3_reg>;               /* VCC */
+
+		backlight = <&backlight>;
+		rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;    /* RL/UD */
+		sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */
+	};