diff options
Diffstat (limited to 'dts/Bindings/display/samsung/samsung,fimd.yaml')
| -rw-r--r-- | dts/Bindings/display/samsung/samsung,fimd.yaml | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/dts/Bindings/display/samsung/samsung,fimd.yaml b/dts/Bindings/display/samsung/samsung,fimd.yaml new file mode 100644 index 0000000000..075231716b --- /dev/null +++ b/dts/Bindings/display/samsung/samsung,fimd.yaml @@ -0,0 +1,197 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/samsung/samsung,fimd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C/S5P/Exynos SoC Fully Interactive Mobile Display (FIMD) + +maintainers: + - Inki Dae <inki.dae@samsung.com> + - Seung-Woo Kim <sw0312.kim@samsung.com> + - Kyungmin Park <kyungmin.park@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + enum: + - samsung,s3c2443-fimd + - samsung,s3c6400-fimd + - samsung,s5pv210-fimd + - samsung,exynos3250-fimd + - samsung,exynos4210-fimd + - samsung,exynos5250-fimd + - samsung,exynos5420-fimd + + '#address-cells': + const: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: sclk_fimd + - const: fimd + + display-timings: + $ref: ../panel/display-timings.yaml# + + i80-if-timings: + type: object + additionalProperties: false + description: | + Timing configuration for lcd i80 interface support. + The parameters are defined as:: + VCLK(internal) __|??????|_____|??????|_____|??????|_____|??????|_____|?? + : : : : : + Address Output --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX + | cs-setup+1 | : : : + |<---------->| : : : + Chip Select ???????????????|____________:____________:____________|?? + | wr-setup+1 | | wr-hold+1 | + |<---------->| |<---------->| + Write Enable ????????????????????????????|____________|??????????????? + | wr-active+1| + |<---------->| + Video Data ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>-- + + properties: + cs-setup: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of address signal is enabled until + chip select is enabled. + default: 0 + + wr-active: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of CS is enabled. + default: 1 + + wr-hold: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of CS is disabled until write + signal is disabled. + default: 0 + + wr-setup: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Clock cycles for the active period of CS signal is enabled until + write signal is enabled. + default: 0 + + iommus: + minItems: 1 + maxItems: 2 + + iommu-names: + items: + - const: m0 + - const: m1 + + interrupts: + items: + - description: FIFO level + - description: VSYNC + - description: LCD system + + interrupt-names: + items: + - const: fifo + - const: vsync + - const: lcd_sys + + power-domains: + maxItems: 1 + + reg: + maxItems: 1 + + samsung,invert-vden: + type: boolean + description: + Video enable signal is inverted. + + samsung,invert-vclk: + type: boolean + description: + Video clock signal is inverted. + + samsung,sysreg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to System Register syscon. + + '#size-cells': + const: 0 + +patternProperties: + "^port@[0-4]+$": + $ref: /schemas/graph.yaml#/properties/port + description: | + Contains ports with port with index:: + 0 - for CAMIF0 input, + 1 - for CAMIF1 input, + 2 - for CAMIF2 input, + 3 - for parallel output, + 4 - for write-back interface + +required: + - compatible + - clocks + - clock-names + - interrupts + - interrupt-names + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: samsung,exynos5420-fimd + then: + properties: + iommus: + minItems: 2 + maxItems: 2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos4.h> + + fimd@11c00000 { + compatible = "samsung,exynos4210-fimd"; + interrupt-parent = <&combiner>; + reg = <0x11c00000 0x20000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <11 0>, <11 1>, <11 2>; + clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>; + clock-names = "sclk_fimd", "fimd"; + power-domains = <&pd_lcd0>; + iommus = <&sysmmu_fimd0>; + samsung,sysreg = <&sys_reg>; + + #address-cells = <1>; + #size-cells = <0>; + + samsung,invert-vden; + samsung,invert-vclk; + + pinctrl-0 = <&lcd_clk>, <&lcd_data24>; + pinctrl-names = "default"; + + port@3 { + reg = <3>; + + fimd_dpi_ep: endpoint { + remote-endpoint = <&lcd_ep>; + }; + }; + }; |