diff options
Diffstat (limited to 'dts/Bindings/display/sitronix,st7735r.txt')
| -rw-r--r-- | dts/Bindings/display/sitronix,st7735r.txt | 35 |
1 files changed, 0 insertions, 35 deletions
diff --git a/dts/Bindings/display/sitronix,st7735r.txt b/dts/Bindings/display/sitronix,st7735r.txt deleted file mode 100644 index cd5c718689..0000000000 --- a/dts/Bindings/display/sitronix,st7735r.txt +++ /dev/null @@ -1,35 +0,0 @@ -Sitronix ST7735R display panels - -This binding is for display panels using a Sitronix ST7735R controller in SPI -mode. - -Required properties: -- compatible: "jianda,jd-t18003-t01", "sitronix,st7735r" -- dc-gpios: Display data/command selection (D/CX) -- reset-gpios: Reset signal (RSTX) - -The node for this driver must be a child node of a SPI controller, hence -all mandatory properties described in ../spi/spi-bus.txt must be specified. - -Optional properties: -- rotation: panel rotation in degrees counter clockwise (0,90,180,270) -- backlight: phandle of the backlight device attached to the panel - -Example: - - backlight: backlight { - compatible = "gpio-backlight"; - gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; - }; - - ... - - display@0{ - compatible = "jianda,jd-t18003-t01", "sitronix,st7735r"; - reg = <0>; - spi-max-frequency = <32000000>; - dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; - rotation = <270>; - backlight = &backlight; - }; |