summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/display/ssd1307fb.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/display/ssd1307fb.txt')
-rw-r--r--dts/Bindings/display/ssd1307fb.txt5
1 files changed, 3 insertions, 2 deletions
diff --git a/dts/Bindings/display/ssd1307fb.txt b/dts/Bindings/display/ssd1307fb.txt
index eb31ed47a2..209d931ef1 100644
--- a/dts/Bindings/display/ssd1307fb.txt
+++ b/dts/Bindings/display/ssd1307fb.txt
@@ -8,14 +8,15 @@ Required properties:
0x3c or 0x3d
- pwm: Should contain the pwm to use according to the OF device tree PWM
specification [0]. Only required for the ssd1307.
- - reset-gpios: Should contain the GPIO used to reset the OLED display
- solomon,height: Height in pixel of the screen driven by the controller
- solomon,width: Width in pixel of the screen driven by the controller
- solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is
mapped to.
Optional properties:
- - reset-active-low: Is the reset gpio is active on physical low?
+ - reset-gpios: The GPIO used to reset the OLED display, if available. See
+ Documentation/devicetree/bindings/gpio/gpio.txt for details.
+ - vbat-supply: The supply for VBAT
- solomon,segment-no-remap: Display needs normal (non-inverted) data column
to segment mapping
- solomon,com-seq: Display uses sequential COM pin configuration