diff options
Diffstat (limited to 'dts/Bindings/display/sunxi/sun4i-drm.txt')
| -rw-r--r-- | dts/Bindings/display/sunxi/sun4i-drm.txt | 43 |
1 files changed, 41 insertions, 2 deletions
diff --git a/dts/Bindings/display/sunxi/sun4i-drm.txt b/dts/Bindings/display/sunxi/sun4i-drm.txt index df8f4aeefe..b95696d748 100644 --- a/dts/Bindings/display/sunxi/sun4i-drm.txt +++ b/dts/Bindings/display/sunxi/sun4i-drm.txt @@ -26,13 +26,14 @@ TCON The TCON acts as a timing controller for RGB, LVDS and TV interfaces. Required properties: - - compatible: value should be "allwinner,sun5i-a13-tcon". + - compatible: value must be either: + * allwinner,sun5i-a13-tcon + * allwinner,sun8i-a33-tcon - reg: base address and size of memory-mapped region - interrupts: interrupt associated to this IP - clocks: phandles to the clocks feeding the TCON. Three are needed: - 'ahb': the interface clocks - 'tcon-ch0': The clock driving the TCON channel 0 - - 'tcon-ch1': The clock driving the TCON channel 1 - resets: phandles to the reset controllers driving the encoder - "lcd": the reset line for the TCON channel 0 @@ -49,6 +50,33 @@ Required properties: second the block connected to the TCON channel 1 (usually the TV encoder) +On the A13, there is one more clock required: + - 'tcon-ch1': The clock driving the TCON channel 1 + +DRC +--- + +The DRC (Dynamic Range Controller), found in the latest Allwinner SoCs +(A31, A23, A33), allows to dynamically adjust pixel +brightness/contrast based on histogram measurements for LCD content +adaptive backlight control. + + +Required properties: + - compatible: value must be one of: + * allwinner,sun8i-a33-drc + - reg: base address and size of the memory-mapped region. + - interrupts: interrupt associated to this IP + - clocks: phandles to the clocks feeding the DRC + * ahb: the DRC interface clock + * mod: the DRC module clock + * ram: the DRC DRAM clock + - clock-names: the clock names mentioned above + - resets: phandles to the reset line driving the DRC + +- ports: A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. The + first port should be the input endpoints, the second one the outputs Display Engine Backend ---------------------- @@ -59,6 +87,7 @@ system. Required properties: - compatible: value must be one of: * allwinner,sun5i-a13-display-backend + * allwinner,sun8i-a33-display-backend - reg: base address and size of the memory-mapped region. - clocks: phandles to the clocks feeding the frontend and backend * ahb: the backend interface clock @@ -71,6 +100,14 @@ Required properties: Documentation/devicetree/bindings/media/video-interfaces.txt. The first port should be the input endpoints, the second one the output +On the A33, some additional properties are required: + - reg needs to have an additional region corresponding to the SAT + - reg-names need to be set, with "be" and "sat" + - clocks and clock-names need to have a phandle to the SAT bus + clocks, whose name will be "sat" + - resets and reset-names need to have a phandle to the SAT bus + resets, whose name will be "sat" + Display Engine Frontend ----------------------- @@ -80,6 +117,7 @@ deinterlacing and color space conversion. Required properties: - compatible: value must be one of: * allwinner,sun5i-a13-display-frontend + * allwinner,sun8i-a33-display-frontend - reg: base address and size of the memory-mapped region. - interrupts: interrupt associated to this IP - clocks: phandles to the clocks feeding the frontend and backend @@ -104,6 +142,7 @@ extra node. Required properties: - compatible: value must be one of: * allwinner,sun5i-a13-display-engine + * allwinner,sun8i-a33-display-engine - allwinner,pipelines: list of phandle to the display engine frontends available. |