diff options
Diffstat (limited to 'dts/Bindings/display/sunxi/sun4i-drm.txt')
| -rw-r--r-- | dts/Bindings/display/sunxi/sun4i-drm.txt | 37 |
1 files changed, 27 insertions, 10 deletions
diff --git a/dts/Bindings/display/sunxi/sun4i-drm.txt b/dts/Bindings/display/sunxi/sun4i-drm.txt index b83e601804..92441086ca 100644 --- a/dts/Bindings/display/sunxi/sun4i-drm.txt +++ b/dts/Bindings/display/sunxi/sun4i-drm.txt @@ -4,15 +4,33 @@ Allwinner A10 Display Pipeline The Allwinner A10 Display pipeline is composed of several components that are going to be documented below: -For the input port of all components up to the TCON in the display -pipeline, if there are multiple components, the local endpoint IDs -must correspond to the index of the upstream block. For example, if -the remote endpoint is Frontend 1, then the local endpoint ID must -be 1. - -Conversely, for the output ports of the same group, the remote endpoint -ID must be the index of the local hardware block. If the local backend -is backend 1, then the remote endpoint ID must be 1. +For all connections between components up to the TCONs in the display +pipeline, when there are multiple components of the same type at the +same depth, the local endpoint ID must be the same as the remote +component's index. For example, if the remote endpoint is Frontend 1, +then the local endpoint ID must be 1. + + Frontend 0 [0] ------- [0] Backend 0 [0] ------- [0] TCON 0 + [1] -- -- [1] [1] -- -- [1] + \ / \ / + X X + / \ / \ + [0] -- -- [0] [0] -- -- [0] + Frontend 1 [1] ------- [1] Backend 1 [1] ------- [1] TCON 1 + +For a two pipeline system such as the one depicted above, the lines +represent the connections between the components, while the numbers +within the square brackets corresponds to the ID of the local endpoint. + +The same rule also applies to DE 2.0 mixer-TCON connections: + + Mixer 0 [0] ----------- [0] TCON 0 + [1] ---- ---- [1] + \ / + X + / \ + [0] ---- ---- [0] + Mixer 1 [1] ----------- [1] TCON 1 HDMI Encoder ------------ @@ -260,7 +278,6 @@ hdmi: hdmi@01c16000 { <&dma SUN4I_DMA_NORMAL 16>, <&dma SUN4I_DMA_DEDICATED 24>; dma-names = "ddc-tx", "ddc-rx", "audio-tx"; - status = "disabled"; ports { #address-cells = <1>; |