summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/display
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/display')
-rw-r--r--dts/Bindings/display/amlogic,meson-vpu.txt2
-rw-r--r--dts/Bindings/display/bridge/renesas,lvds.txt1
-rw-r--r--dts/Bindings/display/himax,hx8357d.txt26
-rw-r--r--dts/Bindings/display/msm/dsi.txt1
-rw-r--r--dts/Bindings/display/msm/gpu.txt4
-rw-r--r--dts/Bindings/display/msm/mdp4.txt2
-rw-r--r--dts/Bindings/display/panel/auo,g101evn01012
-rw-r--r--dts/Bindings/display/panel/bananapi,s070wv20-ct16.txt12
-rw-r--r--dts/Bindings/display/panel/cdtech,s043wq26h-ct7.txt12
-rw-r--r--dts/Bindings/display/panel/cdtech,s070wv95-ct16.txt12
-rw-r--r--dts/Bindings/display/panel/dlc,dlc1010gig.txt12
-rw-r--r--dts/Bindings/display/panel/olimex,lcd-olinuxino.txt42
-rw-r--r--dts/Bindings/display/panel/samsung,s6d16d0.txt30
-rw-r--r--dts/Bindings/display/panel/tpo,tpg110.txt81
-rw-r--r--dts/Bindings/display/renesas,du.txt4
-rw-r--r--dts/Bindings/display/rockchip/dw_hdmi-rockchip.txt3
-rw-r--r--dts/Bindings/display/sunxi/sun4i-drm.txt30
-rw-r--r--dts/Bindings/display/truly,nt35597.txt59
18 files changed, 306 insertions, 39 deletions
diff --git a/dts/Bindings/display/amlogic,meson-vpu.txt b/dts/Bindings/display/amlogic,meson-vpu.txt
index 057b813357..c65fd7a746 100644
--- a/dts/Bindings/display/amlogic,meson-vpu.txt
+++ b/dts/Bindings/display/amlogic,meson-vpu.txt
@@ -67,6 +67,8 @@ Required properties:
Optional properties:
- power-domains: Optional phandle to associated power domain as described in
the file ../power/power_domain.txt
+- amlogic,canvas: phandle to canvas provider node as described in the file
+ ../soc/amlogic/amlogic,canvas.txt
Required nodes:
diff --git a/dts/Bindings/display/bridge/renesas,lvds.txt b/dts/Bindings/display/bridge/renesas,lvds.txt
index 3aeb0ec06f..ba5469dd09 100644
--- a/dts/Bindings/display/bridge/renesas,lvds.txt
+++ b/dts/Bindings/display/bridge/renesas,lvds.txt
@@ -13,6 +13,7 @@ Required properties:
- "renesas,r8a7793-lvds" for R8A7793 (R-Car M2-N) compatible LVDS encoders
- "renesas,r8a7795-lvds" for R8A7795 (R-Car H3) compatible LVDS encoders
- "renesas,r8a7796-lvds" for R8A7796 (R-Car M3-W) compatible LVDS encoders
+ - "renesas,r8a77965-lvds" for R8A77965 (R-Car M3-N) compatible LVDS encoders
- "renesas,r8a77970-lvds" for R8A77970 (R-Car V3M) compatible LVDS encoders
- "renesas,r8a77980-lvds" for R8A77980 (R-Car V3H) compatible LVDS encoders
- "renesas,r8a77990-lvds" for R8A77990 (R-Car E3) compatible LVDS encoders
diff --git a/dts/Bindings/display/himax,hx8357d.txt b/dts/Bindings/display/himax,hx8357d.txt
new file mode 100644
index 0000000000..e641f66476
--- /dev/null
+++ b/dts/Bindings/display/himax,hx8357d.txt
@@ -0,0 +1,26 @@
+Himax HX8357D display panels
+
+This binding is for display panels using a Himax HX8357D controller in SPI
+mode, such as the Adafruit 3.5" TFT for Raspberry Pi.
+
+Required properties:
+- compatible: "adafruit,yx350hv15", "himax,hx8357d"
+- dc-gpios: D/C pin
+- reg: address of the panel on the SPI bus
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+ display@0{
+ compatible = "adafruit,yx350hv15", "himax,hx8357d";
+ reg = <0>;
+ spi-max-frequency = <32000000>;
+ dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+ rotation = <90>;
+ backlight = <&backlight>;
+ };
diff --git a/dts/Bindings/display/msm/dsi.txt b/dts/Bindings/display/msm/dsi.txt
index dfc743219b..9ae9469427 100644
--- a/dts/Bindings/display/msm/dsi.txt
+++ b/dts/Bindings/display/msm/dsi.txt
@@ -106,6 +106,7 @@ Required properties:
- clocks: Phandles to device clocks. See [1] for details on clock bindings.
- clock-names: the following clocks are required:
* "iface"
+ * "ref" (only required for new DTS files/entries)
For 28nm HPM/LP, 28nm 8960 PHYs:
- vddio-supply: phandle to vdd-io regulator device node
For 20nm PHY:
diff --git a/dts/Bindings/display/msm/gpu.txt b/dts/Bindings/display/msm/gpu.txt
index 43fac0fe09..ac8df3b871 100644
--- a/dts/Bindings/display/msm/gpu.txt
+++ b/dts/Bindings/display/msm/gpu.txt
@@ -1,11 +1,13 @@
Qualcomm adreno/snapdragon GPU
Required properties:
-- compatible: "qcom,adreno-XYZ.W", "qcom,adreno"
+- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" or
+ "amd,imageon-XYZ.W", "amd,imageon"
for example: "qcom,adreno-306.0", "qcom,adreno"
Note that you need to list the less specific "qcom,adreno" (since this
is what the device is matched on), in addition to the more specific
with the chip-id.
+ If "amd,imageon" is used, there should be no top level msm device.
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt signal from the gpu.
- clocks: device clocks
diff --git a/dts/Bindings/display/msm/mdp4.txt b/dts/Bindings/display/msm/mdp4.txt
index 3c341a15cc..b07eeb38f7 100644
--- a/dts/Bindings/display/msm/mdp4.txt
+++ b/dts/Bindings/display/msm/mdp4.txt
@@ -38,6 +38,8 @@ Required properties:
Optional properties:
- clock-names: the following clocks are optional:
* "lut_clk"
+- qcom,lcdc-align-lsb: Boolean value indicating that LSB alignment should be
+ used for LCDC. This is only valid for 18bpp panels.
Example:
diff --git a/dts/Bindings/display/panel/auo,g101evn010 b/dts/Bindings/display/panel/auo,g101evn010
new file mode 100644
index 0000000000..bc6a0c858e
--- /dev/null
+++ b/dts/Bindings/display/panel/auo,g101evn010
@@ -0,0 +1,12 @@
+AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,g101evn010"
+- power-supply: as specified in the base binding
+
+Optional properties:
+- backlight: as specified in the base binding
+- enable-gpios: as specified in the base binding
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/bananapi,s070wv20-ct16.txt b/dts/Bindings/display/panel/bananapi,s070wv20-ct16.txt
new file mode 100644
index 0000000000..35bc0c839f
--- /dev/null
+++ b/dts/Bindings/display/panel/bananapi,s070wv20-ct16.txt
@@ -0,0 +1,12 @@
+Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
+
+Required properties:
+- compatible: should be "bananapi,s070wv20-ct16"
+- power-supply: see ./panel-common.txt
+
+Optional properties:
+- enable-gpios: see ./simple-panel.txt
+- backlight: see ./simple-panel.txt
+
+This binding is compatible with the simple-panel binding, which is specified
+in ./simple-panel.txt.
diff --git a/dts/Bindings/display/panel/cdtech,s043wq26h-ct7.txt b/dts/Bindings/display/panel/cdtech,s043wq26h-ct7.txt
new file mode 100644
index 0000000000..057f7f3f6d
--- /dev/null
+++ b/dts/Bindings/display/panel/cdtech,s043wq26h-ct7.txt
@@ -0,0 +1,12 @@
+CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel
+
+Required properties:
+- compatible: should be "cdtech,s043wq26h-ct7"
+- power-supply: as specified in the base binding
+
+Optional properties:
+- backlight: as specified in the base binding
+- enable-gpios: as specified in the base binding
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/cdtech,s070wv95-ct16.txt b/dts/Bindings/display/panel/cdtech,s070wv95-ct16.txt
new file mode 100644
index 0000000000..505615dfa0
--- /dev/null
+++ b/dts/Bindings/display/panel/cdtech,s070wv95-ct16.txt
@@ -0,0 +1,12 @@
+CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel
+
+Required properties:
+- compatible: should be "cdtech,s070wv95-ct16"
+- power-supply: as specified in the base binding
+
+Optional properties:
+- backlight: as specified in the base binding
+- enable-gpios: as specified in the base binding
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/dlc,dlc1010gig.txt b/dts/Bindings/display/panel/dlc,dlc1010gig.txt
new file mode 100644
index 0000000000..fbf5dcd156
--- /dev/null
+++ b/dts/Bindings/display/panel/dlc,dlc1010gig.txt
@@ -0,0 +1,12 @@
+DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel
+
+Required properties:
+- compatible: should be "dlc,dlc1010gig"
+- power-supply: See simple-panel.txt
+
+Optional properties:
+- enable-gpios: See simple-panel.txt
+- backlight: See simple-panel.txt
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/olimex,lcd-olinuxino.txt b/dts/Bindings/display/panel/olimex,lcd-olinuxino.txt
new file mode 100644
index 0000000000..a89f9c830a
--- /dev/null
+++ b/dts/Bindings/display/panel/olimex,lcd-olinuxino.txt
@@ -0,0 +1,42 @@
+Binding for Olimex Ltd. LCD-OLinuXino bridge panel.
+
+This device can be used as bridge between a host controller and LCD panels.
+Currently supported LCDs are:
+ - LCD-OLinuXino-4.3TS
+ - LCD-OLinuXino-5
+ - LCD-OLinuXino-7
+ - LCD-OLinuXino-10
+
+The panel itself contains:
+ - AT24C16C EEPROM holding panel identification and timing requirements
+ - AR1021 resistive touch screen controller (optional)
+ - FT5x6 capacitive touch screnn controller (optional)
+ - GT911/GT928 capacitive touch screen controller (optional)
+
+The above chips share same I2C bus. The EEPROM is factory preprogrammed with
+device information (id, serial, etc.) and timing requirements.
+
+Touchscreen bingings can be found in these files:
+ - input/touchscreen/goodix.txt
+ - input/touchscreen/edt-ft5x06.txt
+ - input/touchscreen/ar1021.txt
+
+Required properties:
+ - compatible: should be "olimex,lcd-olinuxino"
+ - reg: address of the configuration EEPROM, should be <0x50>
+ - power-supply: phandle of the regulator that provides the supply voltage
+
+Optional properties:
+ - enable-gpios: GPIO pin to enable or disable the panel
+ - backlight: phandle of the backlight device attacked to the panel
+
+Example:
+&i2c2 {
+ panel@50 {
+ compatible = "olimex,lcd-olinuxino";
+ reg = <0x50>;
+ power-supply = <&reg_vcc5v0>;
+ enable-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>;
+ backlight = <&backlight>;
+ };
+};
diff --git a/dts/Bindings/display/panel/samsung,s6d16d0.txt b/dts/Bindings/display/panel/samsung,s6d16d0.txt
new file mode 100644
index 0000000000..b94e366f45
--- /dev/null
+++ b/dts/Bindings/display/panel/samsung,s6d16d0.txt
@@ -0,0 +1,30 @@
+Samsung S6D16D0 4" 864x480 AMOLED panel
+
+Required properties:
+ - compatible: should be:
+ "samsung,s6d16d0",
+ - reg: the virtual channel number of a DSI peripheral
+ - vdd1-supply: I/O voltage supply
+ - reset-gpios: a GPIO spec for the reset pin (active low)
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in
+media/video-interfaces.txt. This node should describe panel's video bus.
+
+Example:
+&dsi {
+ ...
+
+ panel@0 {
+ compatible = "samsung,s6d16d0";
+ reg = <0>;
+ vdd1-supply = <&foo>;
+ reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
diff --git a/dts/Bindings/display/panel/tpo,tpg110.txt b/dts/Bindings/display/panel/tpo,tpg110.txt
index f5e3c6f209..40f3d7c713 100644
--- a/dts/Bindings/display/panel/tpo,tpg110.txt
+++ b/dts/Bindings/display/panel/tpo,tpg110.txt
@@ -1,47 +1,70 @@
TPO TPG110 Panel
================
-This binding builds on the DPI bindings, adding a few properties
-as a superset of a DPI. See panel-dpi.txt for the required DPI
-bindings.
+This panel driver is a component that acts as an intermediary
+between an RGB output and a variety of panels. The panel
+driver is strapped up in electronics to the desired resolution
+and other properties, and has a control interface over 3WIRE
+SPI. By talking to the TPG110 over SPI, the strapped properties
+can be discovered and the hardware is therefore mostly
+self-describing.
+
+ +--------+
+SPI -> | TPO | -> physical display
+RGB -> | TPG110 |
+ +--------+
+
+If some electrical strap or alternate resolution is desired,
+this can be set up by taking software control of the display
+over the SPI interface. The interface can also adjust
+for properties of the display such as gamma correction and
+certain electrical driving levels.
+
+The TPG110 does not know the physical dimensions of the panel
+connected, so this needs to be specified in the device tree.
+
+It requires a GPIO line for control of its reset line.
+
+The serial protocol has line names that resemble I2C but the
+protocol is not I2C but 3WIRE SPI.
Required properties:
-- compatible : "tpo,tpg110"
+- compatible : one of:
+ "ste,nomadik-nhk15-display", "tpo,tpg110"
+ "tpo,tpg110"
- grestb-gpios : panel reset GPIO
-- scen-gpios : serial control enable GPIO
-- scl-gpios : serial control clock line GPIO
-- sda-gpios : serial control data line GPIO
+- width-mm : see display/panel/panel-common.txt
+- height-mm : see display/panel/panel-common.txt
+
+The device needs to be a child of an SPI bus, see
+spi/spi-bus.txt. The SPI child must set the following
+properties:
+- spi-3wire
+- spi-max-frequency = <3000000>;
+as these are characteristics of this device.
-Required nodes:
-- Video port for DPI input, see panel-dpi.txt
-- Panel timing for DPI setup, see panel-dpi.txt
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in
+media/video-interfaces.txt. This node should describe panel's video bus.
Example
-------
-panel {
- compatible = "tpo,tpg110", "panel-dpi";
- grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>;
- scen-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
- scl-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
- sda-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+panel: display@0 {
+ compatible = "tpo,tpg110";
+ reg = <0>;
+ spi-3wire;
+ /* 320 ns min period ~= 3 MHz */
+ spi-max-frequency = <3000000>;
+ /* Width and height from data sheet */
+ width-mm = <116>;
+ height-mm = <87>;
+ grestb-gpios = <&foo_gpio 5 GPIO_ACTIVE_LOW>;
backlight = <&bl>;
port {
nomadik_clcd_panel: endpoint {
- remote-endpoint = <&nomadik_clcd_pads>;
+ remote-endpoint = <&foo>;
};
};
-
- panel-timing {
- clock-frequency = <33200000>;
- hactive = <800>;
- hback-porch = <216>;
- hfront-porch = <40>;
- hsync-len = <1>;
- vactive = <480>;
- vback-porch = <35>;
- vfront-porch = <10>;
- vsync-len = <1>;
- };
};
diff --git a/dts/Bindings/display/renesas,du.txt b/dts/Bindings/display/renesas,du.txt
index 9de67be632..3c855d9f27 100644
--- a/dts/Bindings/display/renesas,du.txt
+++ b/dts/Bindings/display/renesas,du.txt
@@ -4,7 +4,9 @@ Required Properties:
- compatible: must be one of the following.
- "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU
+ - "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU
- "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
+ - "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU
- "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
- "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
- "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU
@@ -52,7 +54,9 @@ corresponding to each DU output.
Port0 Port1 Port2 Port3
-----------------------------------------------------------------------------
R8A7743 (RZ/G1M) DPAD 0 LVDS 0 - -
+ R8A7744 (RZ/G1N) DPAD 0 LVDS 0 - -
R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - -
+ R8A77470 (RZ/G1C) DPAD 0 DPAD 1 LVDS 0 -
R8A7779 (R-Car H1) DPAD 0 DPAD 1 - -
R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 -
R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - -
diff --git a/dts/Bindings/display/rockchip/dw_hdmi-rockchip.txt b/dts/Bindings/display/rockchip/dw_hdmi-rockchip.txt
index adc94fc3c9..39143424a4 100644
--- a/dts/Bindings/display/rockchip/dw_hdmi-rockchip.txt
+++ b/dts/Bindings/display/rockchip/dw_hdmi-rockchip.txt
@@ -13,6 +13,7 @@ Required properties:
- compatible: should be one of the following:
"rockchip,rk3288-dw-hdmi"
+ "rockchip,rk3328-dw-hdmi"
"rockchip,rk3399-dw-hdmi"
- reg: See dw_hdmi.txt.
- reg-io-width: See dw_hdmi.txt. Shall be 4.
@@ -34,6 +35,8 @@ Optional properties
- clock-names: May contain "cec" as defined in dw_hdmi.txt.
- clock-names: May contain "grf", power for grf io.
- clock-names: May contain "vpll", external clock for some hdmi phy.
+- phys: from general PHY binding: the phandle for the PHY device.
+- phy-names: Should be "hdmi" if phys references an external phy.
Example:
diff --git a/dts/Bindings/display/sunxi/sun4i-drm.txt b/dts/Bindings/display/sunxi/sun4i-drm.txt
index 7854fff4fc..f426bdb42f 100644
--- a/dts/Bindings/display/sunxi/sun4i-drm.txt
+++ b/dts/Bindings/display/sunxi/sun4i-drm.txt
@@ -79,6 +79,7 @@ Required properties:
- compatible: value must be one of:
* "allwinner,sun8i-a83t-dw-hdmi"
* "allwinner,sun50i-a64-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi"
+ * "allwinner,sun50i-h6-dw-hdmi"
- reg: base address and size of memory-mapped region
- reg-io-width: See dw_hdmi.txt. Shall be 1.
- interrupts: HDMI interrupt number
@@ -86,9 +87,14 @@ Required properties:
* iahb: the HDMI bus clock
* isfr: the HDMI register clock
* tmds: TMDS clock
+ * cec: HDMI CEC clock (H6 only)
+ * hdcp: HDCP clock (H6 only)
+ * hdcp-bus: HDCP bus clock (H6 only)
- clock-names: the clock names mentioned above
- - resets: phandle to the reset controller
- - reset-names: must be "ctrl"
+ - resets:
+ * ctrl: HDMI controller reset
+ * hdcp: HDCP reset (H6 only)
+ - reset-names: reset names mentioned above
- phys: phandle to the DWC HDMI PHY
- phy-names: must be "phy"
@@ -109,6 +115,7 @@ Required properties:
* allwinner,sun8i-h3-hdmi-phy
* allwinner,sun8i-r40-hdmi-phy
* allwinner,sun50i-a64-hdmi-phy
+ * allwinner,sun50i-h6-hdmi-phy
- reg: base address and size of memory-mapped region
- clocks: phandles to the clocks feeding the HDMI PHY
* bus: the HDMI PHY interface clock
@@ -158,6 +165,7 @@ Required properties:
* allwinner,sun9i-a80-tcon-tv
* "allwinner,sun50i-a64-tcon-lcd", "allwinner,sun8i-a83t-tcon-lcd"
* "allwinner,sun50i-a64-tcon-tv", "allwinner,sun8i-a83t-tcon-tv"
+ * allwinner,sun50i-h6-tcon-tv, allwinner,sun8i-r40-tcon-tv
- reg: base address and size of memory-mapped region
- interrupts: interrupt associated to this IP
- clocks: phandles to the clocks feeding the TCON.
@@ -220,24 +228,26 @@ It allows display pipeline to be configured in very different ways:
\ [3] TCON-TV1 [1] - TVE1/RGB
Note that both TCON TOP references same physical unit. Both mixers can be
-connected to any TCON.
+connected to any TCON. Not all TCON TOP variants support all features.
Required properties:
- compatible: value must be one of:
* allwinner,sun8i-r40-tcon-top
+ * allwinner,sun50i-h6-tcon-top
- reg: base address and size of the memory-mapped region.
- clocks: phandle to the clocks feeding the TCON TOP
* bus: TCON TOP interface clock
* tcon-tv0: TCON TV0 clock
- * tve0: TVE0 clock
- * tcon-tv1: TCON TV1 clock
- * tve1: TVE0 clock
- * dsi: MIPI DSI clock
+ * tve0: TVE0 clock (R40 only)
+ * tcon-tv1: TCON TV1 clock (R40 only)
+ * tve1: TVE0 clock (R40 only)
+ * dsi: MIPI DSI clock (R40 only)
- clock-names: clock name mentioned above
- resets: phandle to the reset line driving the TCON TOP
- #clock-cells : must contain 1
- clock-output-names: Names of clocks created for TCON TV0 channel clock,
- TCON TV1 channel clock and DSI channel clock, in that order.
+ TCON TV1 channel clock (R40 only) and DSI channel clock (R40 only), in
+ that order.
- ports: A ports node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt. 6 ports should
@@ -381,6 +391,7 @@ Required properties:
* allwinner,sun8i-v3s-de2-mixer
* allwinner,sun50i-a64-de2-mixer-0
* allwinner,sun50i-a64-de2-mixer-1
+ * allwinner,sun50i-h6-de3-mixer-0
- reg: base address and size of the memory-mapped region.
- clocks: phandles to the clocks feeding the mixer
* bus: the mixer interface clock
@@ -415,9 +426,10 @@ Required properties:
* allwinner,sun8i-v3s-display-engine
* allwinner,sun9i-a80-display-engine
* allwinner,sun50i-a64-display-engine
+ * allwinner,sun50i-h6-display-engine
- allwinner,pipelines: list of phandle to the display engine
- frontends (DE 1.0) or mixers (DE 2.0) available.
+ frontends (DE 1.0) or mixers (DE 2.0/3.0) available.
Example:
diff --git a/dts/Bindings/display/truly,nt35597.txt b/dts/Bindings/display/truly,nt35597.txt
new file mode 100644
index 0000000000..f39c77ee36
--- /dev/null
+++ b/dts/Bindings/display/truly,nt35597.txt
@@ -0,0 +1,59 @@
+Truly model NT35597 DSI display driver
+
+The Truly NT35597 is a generic display driver, currently only configured
+for use in the 2K display on the Qualcomm SDM845 MTP board.
+
+Required properties:
+- compatible: should be "truly,nt35597-2K-display"
+- vdda-supply: phandle of the regulator that provides the supply voltage
+ Power IC supply
+- vdispp-supply: phandle of the regulator that provides the supply voltage
+ for positive LCD bias
+- vdispn-supply: phandle of the regulator that provides the supply voltage
+ for negative LCD bias
+- reset-gpios: phandle of gpio for reset line
+ This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
+ (active low)
+- mode-gpios: phandle of the gpio for choosing the mode of the display
+ for single DSI or Dual DSI
+ This should be low for dual DSI and high for single DSI mode
+- ports: This device has two video ports driven by two DSIs. Their connections
+ are modeled using the OF graph bindings specified in
+ Documentation/devicetree/bindings/graph.txt.
+ - port@0: DSI input port driven by master DSI
+ - port@1: DSI input port driven by secondary DSI
+
+Example:
+
+ dsi@ae94000 {
+ panel@0 {
+ compatible = "truly,nt35597-2K-display";
+ reg = <0>;
+ vdda-supply = <&pm8998_l14>;
+ vdispp-supply = <&lab_regulator>;
+ vdispn-supply = <&ibb_regulator>;
+ pinctrl-names = "default", "suspend";
+ pinctrl-0 = <&dpu_dsi_active>;
+ pinctrl-1 = <&dpu_dsi_suspend>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+ mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ panel0_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ panel1_in: endpoint {
+ remote-endpoint = <&dsi1_out>;
+ };
+ };
+ };
+ };
+ };
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-28 00:50:04 +0000