summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/dma/fsl-qdma.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/dma/fsl-qdma.txt')
-rw-r--r--dts/Bindings/dma/fsl-qdma.txt57
1 files changed, 57 insertions, 0 deletions
diff --git a/dts/Bindings/dma/fsl-qdma.txt b/dts/Bindings/dma/fsl-qdma.txt
new file mode 100644
index 0000000000..6a0ff9059e
--- /dev/null
+++ b/dts/Bindings/dma/fsl-qdma.txt
@@ -0,0 +1,57 @@
+NXP Layerscape SoC qDMA Controller
+==================================
+
+This device follows the generic DMA bindings defined in dma/dma.txt.
+
+Required properties:
+
+- compatible: Must be one of
+ "fsl,ls1021a-qdma": for LS1021A Board
+ "fsl,ls1043a-qdma": for ls1043A Board
+ "fsl,ls1046a-qdma": for ls1046A Board
+- reg: Should contain the register's base address and length.
+- interrupts: Should contain a reference to the interrupt used by this
+ device.
+- interrupt-names: Should contain interrupt names:
+ "qdma-queue0": the block0 interrupt
+ "qdma-queue1": the block1 interrupt
+ "qdma-queue2": the block2 interrupt
+ "qdma-queue3": the block3 interrupt
+ "qdma-error": the error interrupt
+- fsl,dma-queues: Should contain number of queues supported.
+- dma-channels: Number of DMA channels supported
+- block-number: the virtual block number
+- block-offset: the offset of different virtual block
+- status-sizes: status queue size of per virtual block
+- queue-sizes: command queue size of per virtual block, the size number
+ based on queues
+
+Optional properties:
+
+- dma-channels: Number of DMA channels supported by the controller.
+- big-endian: If present registers and hardware scatter/gather descriptors
+ of the qDMA are implemented in big endian mode, otherwise in little
+ mode.
+
+Examples:
+
+ qdma: dma-controller@8390000 {
+ compatible = "fsl,ls1021a-qdma";
+ reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
+ <0x0 0x8389000 0x0 0x1000>, /* Status regs */
+ <0x0 0x838a000 0x0 0x2000>; /* Block regs */
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "qdma-error",
+ "qdma-queue0", "qdma-queue1";
+ dma-channels = <8>;
+ block-number = <2>;
+ block-offset = <0x1000>;
+ fsl,dma-queues = <2>;
+ status-sizes = <64>;
+ queue-sizes = <64 64>;
+ big-endian;
+ };
+
+DMA clients must use the format described in dma/dma.txt file.