1 files changed, 0 insertions, 39 deletions
diff --git a/dts/Bindings/dma/snps,dw-axi-dmac.txt b/dts/Bindings/dma/snps,dw-axi-dmac.txt
deleted file mode 100644
index dbe160400a..0000000000
--- a/dts/Bindings/dma/snps,dw-axi-dmac.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Synopsys DesignWare AXI DMA Controller
-
-Required properties:
-- compatible: "snps,axi-dma-1.01a"
-- reg: Address range of the DMAC registers. This should include
-  all of the per-channel registers.
-- interrupt: Should contain the DMAC interrupt number.
-- dma-channels: Number of channels supported by hardware.
-- snps,dma-masters: Number of AXI masters supported by the hardware.
-- snps,data-width: Maximum AXI data width supported by hardware.
-  (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
-- snps,priority: Priority of channel. Array size is equal to the number of
-  dma-channels. Priority value must be programmed within [0:dma-channels-1]
-  range. (0 - minimum priority)
-- snps,block-size: Maximum block size supported by the controller channel.
-  Array size is equal to the number of dma-channels.
-
-Optional properties:
-- snps,axi-max-burst-len: Restrict master AXI burst length by value specified
-  in this property. If this property is missing the maximum AXI burst length
-  supported by DMAC is used. [1:256]
-
-Example:
-
-dmac: dma-controller@80000 {
-	compatible = "snps,axi-dma-1.01a";
-	reg = <0x80000 0x400>;
-	clocks = <&core_clk>, <&cfgr_clk>;
-	clock-names = "core-clk", "cfgr-clk";
-	interrupt-parent = <&intc>;
-	interrupts = <27>;
-
-	dma-channels = <4>;
-	snps,dma-masters = <2>;
-	snps,data-width = <3>;
-	snps,block-size = <4096 4096 4096 4096>;
-	snps,priority = <0 1 2 3>;
-	snps,axi-max-burst-len = <16>;
-};