diff options
Diffstat (limited to 'dts/Bindings/dma/xilinx/xilinx_dma.txt')
| -rw-r--r-- | dts/Bindings/dma/xilinx/xilinx_dma.txt | 24 |
1 files changed, 15 insertions, 9 deletions
diff --git a/dts/Bindings/dma/xilinx/xilinx_dma.txt b/dts/Bindings/dma/xilinx/xilinx_dma.txt index 93b6d961dd..325aca52cd 100644 --- a/dts/Bindings/dma/xilinx/xilinx_dma.txt +++ b/dts/Bindings/dma/xilinx/xilinx_dma.txt @@ -11,9 +11,16 @@ is to receive from the device. Xilinx AXI CDMA engine, it does transfers between memory-mapped source address and a memory-mapped destination address. +Xilinx AXI MCDMA engine, it does transfer between memory and AXI4 stream +target devices. It can be configured to have up to 16 independent transmit +and receive channels. + Required properties: -- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" or - "xlnx,axi-cdma-1.00.a"" +- compatible: Should be one of- + "xlnx,axi-vdma-1.00.a" + "xlnx,axi-dma-1.00.a" + "xlnx,axi-cdma-1.00.a" + "xlnx,axi-mcdma-1.00.a" - #dma-cells: Should be <1>, see "dmas" property below - reg: Should contain VDMA registers location and length. - xlnx,addrwidth: Should be the vdma addressing size in bits(ex: 32 bits). @@ -29,7 +36,7 @@ Required properties: "m_axis_mm2s_aclk", "s_axis_s2mm_aclk" For CDMA: Required elements: "s_axi_lite_aclk", "m_axi_aclk" - FOR AXIDMA: + For AXIDMA and MCDMA: Required elements: "s_axi_lite_aclk" Optional elements: "m_axi_mm2s_aclk", "m_axi_s2mm_aclk", "m_axi_sg_aclk" @@ -37,12 +44,11 @@ Required properties: Required properties for VDMA: - xlnx,num-fstores: Should be the number of framebuffers as configured in h/w. -Optional properties for AXI DMA: +Optional properties for AXI DMA and MCDMA: - xlnx,sg-length-width: Should be set to the width in bits of the length register as configured in h/w. Takes values {8...26}. If the property is missing or invalid then the default value 23 is used. This is the maximum value that is supported by all IP versions. -- xlnx,mcdma: Tells whether configured for multi-channel mode in the hardware. Optional properties for VDMA: - xlnx,flush-fsync: Tells which channel to Flush on Frame sync. It takes following values: @@ -55,8 +61,8 @@ Required child node properties: For VDMA: It should be either "xlnx,axi-vdma-mm2s-channel" or "xlnx,axi-vdma-s2mm-channel". For CDMA: It should be "xlnx,axi-cdma-channel". - For AXIDMA: It should be either "xlnx,axi-dma-mm2s-channel" or - "xlnx,axi-dma-s2mm-channel". + For AXIDMA and MCDMA: It should be either "xlnx,axi-dma-mm2s-channel" + or "xlnx,axi-dma-s2mm-channel". - interrupts: Should contain per channel VDMA interrupts. - xlnx,datawidth: Should contain the stream data width, take values {32,64...1024}. @@ -69,8 +75,8 @@ Optional child node properties for VDMA: enabled/disabled in hardware. - xlnx,enable-vert-flip: Tells vertical flip is enabled/disabled in hardware(S2MM path). -Optional child node properties for AXI DMA: --dma-channels: Number of dma channels in child node. +Optional child node properties for MCDMA: +- dma-channels: Number of dma channels in child node. Example: ++++++++ |