4 files changed, 106 insertions, 5 deletions
diff --git a/dts/Bindings/dma/renesas,rcar-dmac.txt b/dts/Bindings/dma/renesas,rcar-dmac.txt
index 09daeef1ff..5b902ac8d9 100644
--- a/dts/Bindings/dma/renesas,rcar-dmac.txt
+++ b/dts/Bindings/dma/renesas,rcar-dmac.txt
@@ -14,7 +14,14 @@ not described in these device tree bindings.
 
 Required Properties:
 
-- compatible: must contain "renesas,rcar-dmac"
+- compatible: "renesas,dmac-<soctype>", "renesas,rcar-dmac" as fallback.
+	      Examples with soctypes are:
+		- "renesas,dmac-r8a7790" (R-Car H2)
+		- "renesas,dmac-r8a7791" (R-Car M2-W)
+		- "renesas,dmac-r8a7792" (R-Car V2H)
+		- "renesas,dmac-r8a7793" (R-Car M2-N)
+		- "renesas,dmac-r8a7794" (R-Car E2)
+		- "renesas,dmac-r8a7795" (R-Car H3)
 
 - reg: base address and length of the registers block for the DMAC
 
@@ -35,7 +42,7 @@ Required Properties:
 Example: R8A7790 (R-Car H2) SYS-DMACs
 
 	dmac0: dma-controller@e6700000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
 		reg = <0 0xe6700000 0 0x20000>;
 		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
 			      0 200 IRQ_TYPE_LEVEL_HIGH
@@ -65,7 +72,7 @@ Example: R8A7790 (R-Car H2) SYS-DMACs
 	};
 
 	dmac1: dma-controller@e6720000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
 		reg = <0 0xe6720000 0 0x20000>;
 		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
 			      0 216 IRQ_TYPE_LEVEL_HIGH
diff --git a/dts/Bindings/dma/renesas,usb-dmac.txt b/dts/Bindings/dma/renesas,usb-dmac.txt
index 040f365954..e7780a186a 100644
--- a/dts/Bindings/dma/renesas,usb-dmac.txt
+++ b/dts/Bindings/dma/renesas,usb-dmac.txt
@@ -1,7 +1,13 @@
 * Renesas USB DMA Controller Device Tree bindings
 
 Required Properties:
-- compatible: must contain "renesas,usb-dmac"
+-compatible: "renesas,<soctype>-usb-dmac", "renesas,usb-dmac" as fallback.
+	Examples with soctypes are:
+	  - "renesas,r8a7790-usb-dmac" (R-Car H2)
+	  - "renesas,r8a7791-usb-dmac" (R-Car M2-W)
+	  - "renesas,r8a7793-usb-dmac" (R-Car M2-N)
+	  - "renesas,r8a7794-usb-dmac" (R-Car E2)
+	  - "renesas,r8a7795-usb-dmac" (R-Car H3)
 - reg: base address and length of the registers block for the DMAC
 - interrupts: interrupt specifiers for the DMAC, one for each entry in
   interrupt-names.
@@ -15,7 +21,7 @@ Required Properties:
 Example: R8A7790 (R-Car H2) USB-DMACs
 
 	usb_dmac0: dma-controller@e65a0000 {
-		compatible = "renesas,usb-dmac";
+		compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
 		reg = <0 0xe65a0000 0 0x100>;
 		interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
 			      0 109 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/Bindings/dma/stm32-dma.txt b/dts/Bindings/dma/stm32-dma.txt
new file mode 100644
index 0000000000..70cd13f158
--- /dev/null
+++ b/dts/Bindings/dma/stm32-dma.txt
@@ -0,0 +1,82 @@
+* STMicroelectronics STM32 DMA controller
+
+The STM32 DMA is a general-purpose direct memory access controller capable of
+supporting 8 independent DMA channels. Each channel can have up to 8 requests.
+
+Required properties:
+- compatible: Should be "st,stm32-dma"
+- reg: Should contain DMA registers location and length. This should include
+  all of the per-channel registers.
+- interrupts: Should contain all of the per-channel DMA interrupts in
+  ascending order with respect to the DMA channel index.
+- clocks: Should contain the input clock of the DMA instance.
+- #dma-cells : Must be <4>. See DMA client paragraph for more details.
+
+Optional properties:
+- resets: Reference to a reset controller asserting the DMA controller
+- st,mem2mem: boolean; if defined, it indicates that the controller supports
+  memory-to-memory transfer
+
+Example:
+
+	dma2: dma-controller@40026400 {
+		compatible = "st,stm32-dma";
+		reg = <0x40026400 0x400>;
+		interrupts = <56>,
+			     <57>,
+			     <58>,
+			     <59>,
+			     <60>,
+			     <68>,
+			     <69>,
+			     <70>;
+		clocks = <&clk_hclk>;
+		#dma-cells = <4>;
+		st,mem2mem;
+		resets = <&rcc 150>;
+	};
+
+* DMA client
+
+DMA clients connected to the STM32 DMA controller must use the format
+described in the dma.txt file, using a five-cell specifier for each
+channel: a phandle plus four integer cells.
+The four cells in order are:
+
+1. The channel id
+2. The request line number
+3. A 32bit mask specifying the DMA channel configuration which are device
+   dependent:
+  -bit 9: Peripheral Increment Address
+	0x0: no address increment between transfers
+	0x1: increment address between transfers
+ -bit 10: Memory Increment Address
+	0x0: no address increment between transfers
+	0x1: increment address between transfers
+ -bit 15: Peripheral Increment Offset Size
+	0x0: offset size is linked to the peripheral bus width
+	0x1: offset size is fixed to 4 (32-bit alignment)
+ -bit 16-17: Priority level
+	0x0: low
+	0x1: medium
+	0x2: high
+	0x3: very high
+5. A 32bit mask specifying the DMA FIFO threshold configuration which are device
+   dependent:
+ -bit 0-1: Fifo threshold
+	0x0: 1/4 full FIFO
+	0x1: 1/2 full FIFO
+	0x2: 3/4 full FIFO
+	0x3: full FIFO
+
+Example:
+
+	usart1: serial@40011000 {
+		compatible = "st,stm32-usart", "st,stm32-uart";
+		reg = <0x40011000 0x400>;
+		interrupts = <37>;
+		clocks = <&clk_pclk2>;
+		dmas = <&dma2 2 4 0x10400 0x3>,
+		       <&dma2 7 5 0x10200 0x3>;
+		dma-names = "rx", "tx";
+	};
diff --git a/dts/Bindings/dma/ti-dma-crossbar.txt b/dts/Bindings/dma/ti-dma-crossbar.txt
index b152a75dce..aead5869a2 100644
--- a/dts/Bindings/dma/ti-dma-crossbar.txt
+++ b/dts/Bindings/dma/ti-dma-crossbar.txt
@@ -14,6 +14,10 @@ The DMA controller node need to have the following poroperties:
 
 Optional properties:
 - ti,dma-safe-map: Safe routing value for unused request lines
+- ti,reserved-dma-request-ranges: DMA request ranges which should not be used
+		when mapping xbar input to DMA request, they are either
+		allocated to be used by for example the DSP or they are used as
+		memcpy channels in eDMA.
 
 Notes:
 When requesting channel via ti,dra7-dma-crossbar, the DMA clinet must request
@@ -46,6 +50,8 @@ sdma_xbar: dma-router@4a002b78 {
 	#dma-cells = <1>;
 	dma-requests = <205>;
 	ti,dma-safe-map = <0>;
+	/* Protect the sDMA request ranges: 10-14 and 100-126 */
+	ti,reserved-dma-request-ranges = <10 5>, <100 27>;
 	dma-masters = <&sdma>;
 };