diff options
Diffstat (limited to 'dts/Bindings/dma')
| -rw-r--r-- | dts/Bindings/dma/fsl-imx-sdma.txt | 1 | ||||
| -rw-r--r-- | dts/Bindings/dma/mpc512x-dma.txt | 29 | ||||
| -rw-r--r-- | dts/Bindings/dma/nbpfaxi.txt | 61 | ||||
| -rw-r--r-- | dts/Bindings/dma/rcar-audmapp.txt | 29 | ||||
| -rw-r--r-- | dts/Bindings/dma/renesas,rcar-dmac.txt | 98 | ||||
| -rw-r--r-- | dts/Bindings/dma/ste-dma40.txt | 74 | ||||
| -rw-r--r-- | dts/Bindings/dma/sun6i-dma.txt | 45 |
7 files changed, 335 insertions, 2 deletions
diff --git a/dts/Bindings/dma/fsl-imx-sdma.txt b/dts/Bindings/dma/fsl-imx-sdma.txt index e577196a12..4659fd9523 100644 --- a/dts/Bindings/dma/fsl-imx-sdma.txt +++ b/dts/Bindings/dma/fsl-imx-sdma.txt @@ -47,6 +47,7 @@ The full ID of peripheral types can be found below. 20 ASRC 21 ESAI 22 SSI Dual FIFO (needs firmware ver >= 2) + 23 Shared ASRC The third cell specifies the transfer priority as below. diff --git a/dts/Bindings/dma/mpc512x-dma.txt b/dts/Bindings/dma/mpc512x-dma.txt new file mode 100644 index 0000000000..a6511df165 --- /dev/null +++ b/dts/Bindings/dma/mpc512x-dma.txt @@ -0,0 +1,29 @@ +* Freescale MPC512x and MPC8308 DMA Controller + +The DMA controller in Freescale MPC512x and MPC8308 SoCs can move +blocks of memory contents between memory and peripherals or +from memory to memory. + +Refer to "Generic DMA Controller and DMA request bindings" in +the dma/dma.txt file for a more detailed description of binding. + +Required properties: +- compatible: should be "fsl,mpc5121-dma" or "fsl,mpc8308-dma"; +- reg: should contain the DMA controller registers location and length; +- interrupt for the DMA controller: syntax of interrupt client node + is described in interrupt-controller/interrupts.txt file. +- #dma-cells: the length of the DMA specifier, must be <1>. + Each channel of this DMA controller has a peripheral request line, + the assignment is fixed in hardware. This one cell + in dmas property of a client device represents the channel number. + +Example: + + dma0: dma@14000 { + compatible = "fsl,mpc5121-dma"; + reg = <0x14000 0x1800>; + interrupts = <65 0x8>; + #dma-cells = <1>; + }; + +DMA clients must use the format described in dma/dma.txt file. diff --git a/dts/Bindings/dma/nbpfaxi.txt b/dts/Bindings/dma/nbpfaxi.txt new file mode 100644 index 0000000000..d5e2522b9e --- /dev/null +++ b/dts/Bindings/dma/nbpfaxi.txt @@ -0,0 +1,61 @@ +* Renesas "Type-AXI" NBPFAXI* DMA controllers + +* DMA controller + +Required properties + +- compatible: must be one of + "renesas,nbpfaxi64dmac1b4" + "renesas,nbpfaxi64dmac1b8" + "renesas,nbpfaxi64dmac1b16" + "renesas,nbpfaxi64dmac4b4" + "renesas,nbpfaxi64dmac4b8" + "renesas,nbpfaxi64dmac4b16" + "renesas,nbpfaxi64dmac8b4" + "renesas,nbpfaxi64dmac8b8" + "renesas,nbpfaxi64dmac8b16" +- #dma-cells: must be 2: the first integer is a terminal number, to which this + slave is connected, the second one is flags. Flags is a bitmask + with the following bits defined: + +#define NBPF_SLAVE_RQ_HIGH 1 +#define NBPF_SLAVE_RQ_LOW 2 +#define NBPF_SLAVE_RQ_LEVEL 4 + +Optional properties: + +You can use dma-channels and dma-requests as described in dma.txt, although they +won't be used, this information is derived from the compatibility string. + +Example: + + dma: dma-controller@48000000 { + compatible = "renesas,nbpfaxi64dmac8b4"; + reg = <0x48000000 0x400>; + interrupts = <0 12 0x4 + 0 13 0x4 + 0 14 0x4 + 0 15 0x4 + 0 16 0x4 + 0 17 0x4 + 0 18 0x4 + 0 19 0x4>; + #dma-cells = <2>; + dma-channels = <8>; + dma-requests = <8>; + }; + +* DMA client + +Required properties: + +dmas and dma-names are required, as described in dma.txt. + +Example: + +#include <dt-bindings/dma/nbpfaxi.h> + +... + dmas = <&dma 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL) + &dma 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>; + dma-names = "rx", "tx"; diff --git a/dts/Bindings/dma/rcar-audmapp.txt b/dts/Bindings/dma/rcar-audmapp.txt new file mode 100644 index 0000000000..9f1d750d76 --- /dev/null +++ b/dts/Bindings/dma/rcar-audmapp.txt @@ -0,0 +1,29 @@ +* R-Car Audio DMAC peri peri Device Tree bindings + +Required properties: +- compatible: should be "renesas,rcar-audmapp" +- #dma-cells: should be <1>, see "dmas" property below + +Example: + audmapp: audio-dma-pp@0xec740000 { + compatible = "renesas,rcar-audmapp"; + #dma-cells = <1>; + + reg = <0 0xec740000 0 0x200>; + }; + + +* DMA client + +Required properties: +- dmas: a list of <[DMA multiplexer phandle] [SRS/DRS value]> pairs, + where SRS/DRS values are fixed handles, specified in the SoC + manual as the value that would be written into the PDMACHCR. +- dma-names: a list of DMA channel names, one per "dmas" entry + +Example: + + dmas = <&audmapp 0x2d00 + &audmapp 0x3700>; + dma-names = "src0_ssiu0", + "dvc0_ssiu0"; diff --git a/dts/Bindings/dma/renesas,rcar-dmac.txt b/dts/Bindings/dma/renesas,rcar-dmac.txt new file mode 100644 index 0000000000..df0f48bcf7 --- /dev/null +++ b/dts/Bindings/dma/renesas,rcar-dmac.txt @@ -0,0 +1,98 @@ +* Renesas R-Car DMA Controller Device Tree bindings + +Renesas R-Car Generation 2 SoCs have have multiple multi-channel DMA +controller instances named DMAC capable of serving multiple clients. Channels +can be dedicated to specific clients or shared between a large number of +clients. + +DMA clients are connected to the DMAC ports referenced by an 8-bit identifier +called MID/RID. + +Each DMA client is connected to one dedicated port of the DMAC, identified by +an 8-bit port number called the MID/RID. A DMA controller can thus serve up to +256 clients in total. When the number of hardware channels is lower than the +number of clients to be served, channels must be shared between multiple DMA +clients. The association of DMA clients to DMAC channels is fully dynamic and +not described in these device tree bindings. + +Required Properties: + +- compatible: must contain "renesas,rcar-dmac" + +- reg: base address and length of the registers block for the DMAC + +- interrupts: interrupt specifiers for the DMAC, one for each entry in + interrupt-names. +- interrupt-names: one entry per channel, named "ch%u", where %u is the + channel number ranging from zero to the number of channels minus one. + +- clock-names: "fck" for the functional clock +- clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. +- clock-names: must contain "fck" for the functional clock. + +- #dma-cells: must be <1>, the cell specifies the MID/RID of the DMAC port + connected to the DMA client +- dma-channels: number of DMA channels + +Example: R8A7790 (R-Car H2) SYS-DMACs + + dmac0: dma-controller@e6700000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH + 0 200 IRQ_TYPE_LEVEL_HIGH + 0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH + 0 205 IRQ_TYPE_LEVEL_HIGH + 0 206 IRQ_TYPE_LEVEL_HIGH + 0 207 IRQ_TYPE_LEVEL_HIGH + 0 208 IRQ_TYPE_LEVEL_HIGH + 0 209 IRQ_TYPE_LEVEL_HIGH + 0 210 IRQ_TYPE_LEVEL_HIGH + 0 211 IRQ_TYPE_LEVEL_HIGH + 0 212 IRQ_TYPE_LEVEL_HIGH + 0 213 IRQ_TYPE_LEVEL_HIGH + 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH + 0 216 IRQ_TYPE_LEVEL_HIGH + 0 217 IRQ_TYPE_LEVEL_HIGH + 0 218 IRQ_TYPE_LEVEL_HIGH + 0 219 IRQ_TYPE_LEVEL_HIGH + 0 308 IRQ_TYPE_LEVEL_HIGH + 0 309 IRQ_TYPE_LEVEL_HIGH + 0 310 IRQ_TYPE_LEVEL_HIGH + 0 311 IRQ_TYPE_LEVEL_HIGH + 0 312 IRQ_TYPE_LEVEL_HIGH + 0 313 IRQ_TYPE_LEVEL_HIGH + 0 314 IRQ_TYPE_LEVEL_HIGH + 0 315 IRQ_TYPE_LEVEL_HIGH + 0 316 IRQ_TYPE_LEVEL_HIGH + 0 317 IRQ_TYPE_LEVEL_HIGH + 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; diff --git a/dts/Bindings/dma/ste-dma40.txt b/dts/Bindings/dma/ste-dma40.txt index 1f5729f106..95800ab37b 100644 --- a/dts/Bindings/dma/ste-dma40.txt +++ b/dts/Bindings/dma/ste-dma40.txt @@ -35,9 +35,11 @@ Required properties: Each dmas request consists of 4 cells: 1. A phandle pointing to the DMA controller - 2. Device Type + 2. Device signal number, the signal line for single and burst requests + connected from the device to the DMA40 engine 3. The DMA request line number (only when 'use fixed channel' is set) - 4. A 32bit mask specifying; mode, direction and endianness [NB: This list will grow] + 4. A 32bit mask specifying; mode, direction and endianness + [NB: This list will grow] 0x00000001: Mode: Logical channel when unset Physical channel when set @@ -54,6 +56,74 @@ Each dmas request consists of 4 cells: Normal priority when unset High priority when set +Existing signal numbers for the DB8500 ASIC. Unless specified, the signals are +bidirectional, i.e. the same for RX and TX operations: + +0: SPI controller 0 +1: SD/MMC controller 0 (unused) +2: SD/MMC controller 1 (unused) +3: SD/MMC controller 2 (unused) +4: I2C port 1 +5: I2C port 3 +6: I2C port 2 +7: I2C port 4 +8: Synchronous Serial Port SSP0 +9: Synchronous Serial Port SSP1 +10: Multi-Channel Display Engine MCDE RX +11: UART port 2 +12: UART port 1 +13: UART port 0 +14: Multirate Serial Port MSP2 +15: I2C port 0 +16: USB OTG in/out endpoints 7 & 15 +17: USB OTG in/out endpoints 6 & 14 +18: USB OTG in/out endpoints 5 & 13 +19: USB OTG in/out endpoints 4 & 12 +20: SLIMbus or HSI channel 0 +21: SLIMbus or HSI channel 1 +22: SLIMbus or HSI channel 2 +23: SLIMbus or HSI channel 3 +24: Multimedia DSP SXA0 +25: Multimedia DSP SXA1 +26: Multimedia DSP SXA2 +27: Multimedia DSP SXA3 +28: SD/MM controller 2 +29: SD/MM controller 0 +30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2 +31: MSP port 0 or SLIMbus channel 0 +32: SD/MM controller 1 +33: SPI controller 2 +34: i2c3 RX2 TX2 +35: SPI controller 1 +36: USB OTG in/out endpoints 3 & 11 +37: USB OTG in/out endpoints 2 & 10 +38: USB OTG in/out endpoints 1 & 9 +39: USB OTG in/out endpoints 8 +40: SPI controller 3 +41: SD/MM controller 3 +42: SD/MM controller 4 +43: SD/MM controller 5 +44: Multimedia DSP SXA4 +45: Multimedia DSP SXA5 +46: SLIMbus channel 8 or Multimedia DSP SXA6 +47: SLIMbus channel 9 or Multimedia DSP SXA7 +48: Crypto Accelerator 1 +49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX +50: Hash Accelerator 1 TX +51: memcpy TX (to be used by the DMA driver for memcpy operations) +52: SLIMbus or HSI channel 4 +53: SLIMbus or HSI channel 5 +54: SLIMbus or HSI channel 6 +55: SLIMbus or HSI channel 7 +56: memcpy (to be used by the DMA driver for memcpy operations) +57: memcpy (to be used by the DMA driver for memcpy operations) +58: memcpy (to be used by the DMA driver for memcpy operations) +59: memcpy (to be used by the DMA driver for memcpy operations) +60: memcpy (to be used by the DMA driver for memcpy operations) +61: Crypto Accelerator 0 +62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX +63: Hash Accelerator 0 TX + Example: uart@80120000 { diff --git a/dts/Bindings/dma/sun6i-dma.txt b/dts/Bindings/dma/sun6i-dma.txt new file mode 100644 index 0000000000..3e145c1675 --- /dev/null +++ b/dts/Bindings/dma/sun6i-dma.txt @@ -0,0 +1,45 @@ +Allwinner A31 DMA Controller + +This driver follows the generic DMA bindings defined in dma.txt. + +Required properties: + +- compatible: Must be "allwinner,sun6i-a31-dma" +- reg: Should contain the registers base address and length +- interrupts: Should contain a reference to the interrupt used by this device +- clocks: Should contain a reference to the parent AHB clock +- resets: Should contain a reference to the reset controller asserting + this device in reset +- #dma-cells : Should be 1, a single cell holding a line request number + +Example: + dma: dma-controller@01c02000 { + compatible = "allwinner,sun6i-a31-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <0 50 4>; + clocks = <&ahb1_gates 6>; + resets = <&ahb1_rst 6>; + #dma-cells = <1>; + }; + +Clients: + +DMA clients connected to the A31 DMA controller must use the format +described in the dma.txt file, using a two-cell specifier for each +channel: a phandle plus one integer cells. +The two cells in order are: + +1. A phandle pointing to the DMA controller. +2. The port ID as specified in the datasheet + +Example: +spi2: spi@01c6a000 { + compatible = "allwinner,sun6i-a31-spi"; + reg = <0x01c6a000 0x1000>; + interrupts = <0 67 4>; + clocks = <&ahb1_gates 22>, <&spi2_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma 25>, <&dma 25>; + dma-names = "rx", "tx"; + resets = <&ahb1_rst 22>; +}; |