1 files changed, 0 insertions, 45 deletions
diff --git a/dts/Bindings/eeprom/at25.txt b/dts/Bindings/eeprom/at25.txt
deleted file mode 100644
index fcacd97abd..0000000000
--- a/dts/Bindings/eeprom/at25.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-EEPROMs (SPI) compatible with Atmel at25.
-
-Required properties:
-- compatible : Should be "<vendor>,<type>", and generic value "atmel,at25".
-  Example "<vendor>,<type>" values:
-    "anvo,anv32e61w"
-    "microchip,25lc040"
-    "st,m95m02"
-    "st,m95256"
-
-- reg : chip select number
-- spi-max-frequency : max spi frequency to use
-- pagesize : size of the eeprom page
-- size : total eeprom size in bytes
-- address-width : number of address bits (one of 8, 9, 16, or 24).
-  For 9 bits, the MSB of the address is sent as bit 3 of the instruction
-  byte, before the address byte.
-
-Optional properties:
-- spi-cpha : SPI shifted clock phase, as per spi-bus bindings.
-- spi-cpol : SPI inverse clock polarity, as per spi-bus bindings.
-- read-only : this parameter-less property disables writes to the eeprom
-- wp-gpios : GPIO to which the write-protect pin of the chip is connected
-
-Obsolete legacy properties can be used in place of "size", "pagesize",
-"address-width", and "read-only":
-- at25,byte-len : total eeprom size in bytes
-- at25,addr-mode : addr-mode flags, as defined in include/linux/spi/eeprom.h
-- at25,page-size : size of the eeprom page
-
-Additional compatible properties are also allowed.
-
-Example:
-	eeprom@0 {
-		compatible = "st,m95256", "atmel,at25";
-		reg = <0>
-		spi-max-frequency = <5000000>;
-		spi-cpha;
-		spi-cpol;
-		wp-gpios = <&gpio1 3 0>;
-
-		pagesize = <64>;
-		size = <32768>;
-		address-width = <16>;
-	};