diff options
Diffstat (limited to 'dts/Bindings/firmware')
| -rw-r--r-- | dts/Bindings/firmware/intel,ixp4xx-network-processing-engine.yaml | 44 | ||||
| -rw-r--r-- | dts/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt | 54 |
2 files changed, 45 insertions, 53 deletions
diff --git a/dts/Bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/dts/Bindings/firmware/intel,ixp4xx-network-processing-engine.yaml new file mode 100644 index 0000000000..8cb136c376 --- /dev/null +++ b/dts/Bindings/firmware/intel,ixp4xx-network-processing-engine.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Linaro Ltd. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/firmware/intel-ixp4xx-network-processing-engine.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Intel IXP4xx Network Processing Engine + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + On the IXP4xx SoCs, the Network Processing Engine (NPE) is a small + processor that can load a firmware to perform offloading of networking + and crypto tasks. It also manages the MDIO bus to the ethernet PHYs + on the IXP4xx platform. All IXP4xx platforms have three NPEs at + consecutive memory locations. They are all included in the same + device node since they are not independent of each other. + +properties: + compatible: + oneOf: + - items: + - const: intel,ixp4xx-network-processing-engine + + reg: + minItems: 3 + maxItems: 3 + items: + - description: NPE0 register range + - description: NPE1 register range + - description: NPE2 register range + +required: + - compatible + - reg + +examples: + - | + npe@c8006000 { + compatible = "intel,ixp4xx-network-processing-engine"; + reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>; + }; diff --git a/dts/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/dts/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt index 614bac55df..a4fe136be2 100644 --- a/dts/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt +++ b/dts/Bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt @@ -17,53 +17,6 @@ Required properties: - "smc" : SMC #0, following the SMCCC - "hvc" : HVC #0, following the SMCCC --------------------------------------------------------------------------- -Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC controlled using -Zynq MPSoC firmware interface --------------------------------------------------------------------------- -The clock controller is a h/w block of Zynq Ultrascale+ MPSoC clock -tree. It reads required input clock frequencies from the devicetree and acts -as clock provider for all clock consumers of PS clocks. - -See clock_bindings.txt for more information on the generic clock bindings. - -Required properties: - - #clock-cells: Must be 1 - - compatible: Must contain: "xlnx,zynqmp-clk" - - clocks: List of clock specifiers which are external input - clocks to the given clock controller. Please refer - the next section to find the input clocks for a - given controller. - - clock-names: List of clock names which are exteral input clocks - to the given clock controller. Please refer to the - clock bindings for more details. - -Input clocks for zynqmp Ultrascale+ clock controller: - -The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock -inputs. These required clock inputs are: - - pss_ref_clk (PS reference clock) - - video_clk (reference clock for video system ) - - pss_alt_ref_clk (alternative PS reference clock) - - aux_ref_clk - - gt_crx_ref_clk (transceiver reference clock) - -The following strings are optional parameters to the 'clock-names' property in -order to provide an optional (E)MIO clock source: - - swdt0_ext_clk - - swdt1_ext_clk - - gem0_emio_clk - - gem1_emio_clk - - gem2_emio_clk - - gem3_emio_clk - - mio_clk_XX # with XX = 00..77 - - mio_clk_50_or_51 #for the mux clock to gem tsu from 50 or 51 - - -Output clocks are registered based on clock information received -from firmware. Output clocks indexes are mentioned in -include/dt-bindings/clock/xlnx,zynqmp-clk.h. - ------- Example ------- @@ -72,11 +25,6 @@ firmware { zynqmp_firmware: zynqmp-firmware { compatible = "xlnx,zynqmp-firmware"; method = "smc"; - zynqmp_clk: clock-controller { - #clock-cells = <1>; - compatible = "xlnx,zynqmp-clk"; - clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <>_crx_ref_clk>; - clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk"; - }; + ... }; }; |