diff options
Diffstat (limited to 'dts/Bindings/gpio/brcm,bcm6345-gpio.txt')
| -rw-r--r-- | dts/Bindings/gpio/brcm,bcm6345-gpio.txt | 46 |
1 files changed, 0 insertions, 46 deletions
diff --git a/dts/Bindings/gpio/brcm,bcm6345-gpio.txt b/dts/Bindings/gpio/brcm,bcm6345-gpio.txt deleted file mode 100644 index e7853143fa..0000000000 --- a/dts/Bindings/gpio/brcm,bcm6345-gpio.txt +++ /dev/null @@ -1,46 +0,0 @@ -Bindings for the Broadcom's brcm,bcm6345-gpio memory-mapped GPIO controllers. - -These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345 -are the only ones which don't need a pinctrl driver. -BCM6338 have 8-bit data and dirout registers, where GPIO state can be read -and/or written, and the direction changed from input to output. -BCM6345 have 16-bit data and dirout registers, where GPIO state can be read -and/or written, and the direction changed from input to output. - -Required properties: - - compatible: should be "brcm,bcm6345-gpio" - - reg-names: must contain - "dat" - data register - "dirout" - direction (output) register - - reg: address + size pairs describing the GPIO register sets; - order must correspond with the order of entries in reg-names - - #gpio-cells: must be set to 2. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low - - gpio-controller: Marks the device node as a gpio controller. - -Optional properties: - - native-endian: use native endian memory. - -Examples: - - BCM6338: - gpio: gpio-controller@fffe0407 { - compatible = "brcm,bcm6345-gpio"; - reg-names = "dirout", "dat"; - reg = <0xfffe0407 1>, <0xfffe040f 1>; - - #gpio-cells = <2>; - gpio-controller; - }; - - - BCM6345: - gpio: gpio-controller@fffe0406 { - compatible = "brcm,bcm6345-gpio"; - reg-names = "dirout", "dat"; - reg = <0xfffe0406 2>, <0xfffe040a 2>; - native-endian; - - #gpio-cells = <2>; - gpio-controller; - }; |