1 files changed, 0 insertions, 35 deletions
diff --git a/dts/Bindings/gpio/fsl-imx-gpio.txt b/dts/Bindings/gpio/fsl-imx-gpio.txt
deleted file mode 100644
index b4cd9f906c..0000000000
--- a/dts/Bindings/gpio/fsl-imx-gpio.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* Freescale i.MX/MXC GPIO controller
-
-Required properties:
-- compatible : Should be "fsl,<soc>-gpio"
-- reg : Address and length of the register set for the device
-- interrupts : Should be the port interrupt shared by all 32 pins, if
-  one number.  If two numbers, the first one is the interrupt shared
-  by low 16 pins and the second one is for high 16 pins.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two.  The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-      0 = active high
-      1 = active low
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells : Should be 2.  The first cell is the GPIO number.
-  The second cell bits[3:0] is used to specify trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-
-Optional properties:
-- clocks: the clock for clocking the GPIO silicon
-
-Example:
-
-gpio0: gpio@73f84000 {
-	compatible = "fsl,imx51-gpio", "fsl,imx35-gpio";
-	reg = <0x73f84000 0x4000>;
-	interrupts = <50 51>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};