1 files changed, 0 insertions, 88 deletions
diff --git a/dts/Bindings/gpio/gpio-mxs.txt b/dts/Bindings/gpio/gpio-mxs.txt
deleted file mode 100644
index 1e677a47b8..0000000000
--- a/dts/Bindings/gpio/gpio-mxs.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-* Freescale MXS GPIO controller
-
-The Freescale MXS GPIO controller is part of MXS PIN controller.  The
-GPIOs are organized in port/bank.  Each port consists of 32 GPIOs.
-
-As the GPIO controller is embedded in the PIN controller and all the
-GPIO ports share the same IO space with PIN controller, the GPIO node
-will be represented as sub-nodes of MXS pinctrl node.
-
-Required properties for GPIO node:
-- compatible : Should be "fsl,<soc>-gpio".  The supported SoCs include
-  imx23 and imx28.
-- interrupts : Should be the port interrupt shared by all 32 pins.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two.  The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-      0 = active high
-      1 = active low
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells : Should be 2.  The first cell is the GPIO number.
-  The second cell bits[3:0] is used to specify trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-
-Note: Each GPIO port should have an alias correctly numbered in "aliases"
-node.
-
-Examples:
-
-aliases {
-	gpio0 = &gpio0;
-	gpio1 = &gpio1;
-	gpio2 = &gpio2;
-	gpio3 = &gpio3;
-	gpio4 = &gpio4;
-};
-
-pinctrl@80018000 {
-	compatible = "fsl,imx28-pinctrl", "simple-bus";
-	reg = <0x80018000 2000>;
-
-	gpio0: gpio@0 {
-		compatible = "fsl,imx28-gpio";
-		interrupts = <127>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpio1: gpio@1 {
-		compatible = "fsl,imx28-gpio";
-		interrupts = <126>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpio2: gpio@2 {
-		compatible = "fsl,imx28-gpio";
-		interrupts = <125>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpio3: gpio@3 {
-		compatible = "fsl,imx28-gpio";
-		interrupts = <124>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpio4: gpio@4 {
-		compatible = "fsl,imx28-gpio";
-		interrupts = <123>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};