summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/gpio/gpio-xlp.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/gpio/gpio-xlp.txt')
-rw-r--r--dts/Bindings/gpio/gpio-xlp.txt49
1 files changed, 0 insertions, 49 deletions
diff --git a/dts/Bindings/gpio/gpio-xlp.txt b/dts/Bindings/gpio/gpio-xlp.txt
deleted file mode 100644
index 47fc64922f..0000000000
--- a/dts/Bindings/gpio/gpio-xlp.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Netlogic XLP Family GPIO
-========================
-
-This GPIO driver is used for following Netlogic XLP SoCs:
- XLP832, XLP316, XLP208, XLP980, XLP532
-This GPIO driver is also compatible with GPIO controller found on
-Broadcom Vulcan ARM64.
-
-Required properties:
--------------------
-
-- compatible: Should be one of the following:
- - "netlogic,xlp832-gpio": For Netlogic XLP832
- - "netlogic,xlp316-gpio": For Netlogic XLP316
- - "netlogic,xlp208-gpio": For Netlogic XLP208
- - "netlogic,xlp980-gpio": For Netlogic XLP980
- - "netlogic,xlp532-gpio": For Netlogic XLP532
- - "brcm,vulcan-gpio": For Broadcom Vulcan ARM64
-- reg: Physical base address and length of the controller's registers.
-- #gpio-cells: Should be two. The first cell is the pin number and the second
- cell is used to specify optional parameters (currently unused).
-- gpio-controller: Marks the device node as a GPIO controller.
-- nr-gpios: Number of GPIO pins supported by the controller.
-- interrupt-cells: Should be two. The first cell is the GPIO Number. The
- second cell is used to specify flags. The following subset of flags is
- supported:
- - trigger type:
- 1 = low to high edge triggered.
- 2 = high to low edge triggered.
- 4 = active high level-sensitive.
- 8 = active low level-sensitive.
-- interrupts: Interrupt number for this device.
-- interrupt-controller: Identifies the node as an interrupt controller.
-
-Example:
-
- gpio: xlp_gpio@34000 {
- compatible = "netlogic,xlp316-gpio";
- reg = <0 0x34100 0x1000
- 0 0x35100 0x1000>;
- #gpio-cells = <2>;
- gpio-controller;
- nr-gpios = <57>;
-
- #interrupt-cells = <2>;
- interrupt-parent = <&pic>;
- interrupts = <39>;
- interrupt-controller;
- };