summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/gpio/gpio_oxnas.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/gpio/gpio_oxnas.txt')
-rw-r--r--dts/Bindings/gpio/gpio_oxnas.txt47
1 files changed, 47 insertions, 0 deletions
diff --git a/dts/Bindings/gpio/gpio_oxnas.txt b/dts/Bindings/gpio/gpio_oxnas.txt
new file mode 100644
index 0000000000..928ed4f439
--- /dev/null
+++ b/dts/Bindings/gpio/gpio_oxnas.txt
@@ -0,0 +1,47 @@
+* Oxford Semiconductor OXNAS SoC GPIO Controller
+
+Please refer to gpio.txt for generic information regarding GPIO bindings.
+
+Required properties:
+ - compatible: "oxsemi,ox810se-gpio"
+ - reg: Base address and length for the device.
+ - interrupts: The port interrupt shared by all pins.
+ - gpio-controller: Marks the port as GPIO controller.
+ - #gpio-cells: Two. The first cell is the pin number and
+ the second cell is used to specify the gpio polarity as defined in
+ defined in <dt-bindings/gpio/gpio.h>:
+ 0 = GPIO_ACTIVE_HIGH
+ 1 = GPIO_ACTIVE_LOW
+ - interrupt-controller: Marks the device node as an interrupt controller.
+ - #interrupt-cells: Two. The first cell is the GPIO number and second cell
+ is used to specify the trigger type as defined in
+ <dt-bindings/interrupt-controller/irq.h>:
+ IRQ_TYPE_EDGE_RISING
+ IRQ_TYPE_EDGE_FALLING
+ IRQ_TYPE_EDGE_BOTH
+ - gpio-ranges: Interaction with the PINCTRL subsystem, it also specifies the
+ gpio base and count, should be in the format of numeric-gpio-range as
+ specified in the gpio.txt file.
+
+Example:
+
+gpio0: gpio@0 {
+ compatible = "oxsemi,ox810se-gpio";
+ reg = <0x000000 0x100000>;
+ interrupts = <21>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 32>;
+};
+
+keys {
+ ...
+
+ button-esc {
+ label = "ESC";
+ linux,code = <1>;
+ gpios = <&gpio0 12 0>;
+ };
+};