1 files changed, 0 insertions, 92 deletions
diff --git a/dts/Bindings/gpu/arm,mali-bifrost.txt b/dts/Bindings/gpu/arm,mali-bifrost.txt
deleted file mode 100644
index b8be9dbc68..0000000000
--- a/dts/Bindings/gpu/arm,mali-bifrost.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-ARM Mali Bifrost GPU
-====================
-
-Required properties:
-
-- compatible :
-  * Since Mali Bifrost GPU model/revision is fully discoverable by reading
-    some determined registers, must contain the following:
-    + "arm,mali-bifrost"
-  * which must be preceded by one of the following vendor specifics:
-    + "amlogic,meson-g12a-mali"
-
-- reg : Physical base address of the device and length of the register area.
-
-- interrupts : Contains the three IRQ lines required by Mali Bifrost devices,
-  in the following defined order.
-
-- interrupt-names : Contains the names of IRQ resources in this exact defined
-  order: "job", "mmu", "gpu".
-
-Optional properties:
-
-- clocks : Phandle to clock for the Mali Bifrost device.
-
-- mali-supply : Phandle to regulator for the Mali device. Refer to
-  Documentation/devicetree/bindings/regulator/regulator.txt for details.
-
-- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt
-  for details.
-
-- resets : Phandle of the GPU reset line.
-
-Vendor-specific bindings
-------------------------
-
-The Mali GPU is integrated very differently from one SoC to
-another. In order to accommodate those differences, you have the option
-to specify one more vendor-specific compatible, among:
-
-- "amlogic,meson-g12a-mali"
-  Required properties:
-  - resets : Should contain phandles of :
-    + GPU reset line
-    + GPU APB glue reset line
-
-Example for a Mali-G31:
-
-gpu@ffa30000 {
-	compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
-	reg = <0xffe40000 0x10000>;
-	interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "job", "mmu", "gpu";
-	clocks = <&clk CLKID_MALI>;
-	mali-supply = <&vdd_gpu>;
-	operating-points-v2 = <&gpu_opp_table>;
-	resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>;
-};
-
-gpu_opp_table: opp_table0 {
-	compatible = "operating-points-v2";
-
-	opp@533000000 {
-		opp-hz = /bits/ 64 <533000000>;
-		opp-microvolt = <1250000>;
-	};
-	opp@450000000 {
-		opp-hz = /bits/ 64 <450000000>;
-		opp-microvolt = <1150000>;
-	};
-	opp@400000000 {
-		opp-hz = /bits/ 64 <400000000>;
-		opp-microvolt = <1125000>;
-	};
-	opp@350000000 {
-		opp-hz = /bits/ 64 <350000000>;
-		opp-microvolt = <1075000>;
-	};
-	opp@266000000 {
-		opp-hz = /bits/ 64 <266000000>;
-		opp-microvolt = <1025000>;
-	};
-	opp@160000000 {
-		opp-hz = /bits/ 64 <160000000>;
-		opp-microvolt = <925000>;
-	};
-	opp@100000000 {
-		opp-hz = /bits/ 64 <100000000>;
-		opp-microvolt = <912500>;
-	};
-};