diff options
Diffstat (limited to 'dts/Bindings/hwmon/ntc_thermistor.txt')
| -rw-r--r-- | dts/Bindings/hwmon/ntc_thermistor.txt | 44 |
1 files changed, 0 insertions, 44 deletions
diff --git a/dts/Bindings/hwmon/ntc_thermistor.txt b/dts/Bindings/hwmon/ntc_thermistor.txt deleted file mode 100644 index 4c5c371297..0000000000 --- a/dts/Bindings/hwmon/ntc_thermistor.txt +++ /dev/null @@ -1,44 +0,0 @@ -NTC Thermistor hwmon sensors -------------------------------- - -Requires node properties: -- "compatible" value : one of - "epcos,b57330v2103" - "epcos,b57891s0103" - "murata,ncp15wb473" - "murata,ncp18wb473" - "murata,ncp21wb473" - "murata,ncp03wb473" - "murata,ncp15wl333" - "murata,ncp03wf104" - "murata,ncp15xh103" - -/* Usage of vendor name "ntc" is deprecated */ -<DEPRECATED> "ntc,ncp15wb473" -<DEPRECATED> "ntc,ncp18wb473" -<DEPRECATED> "ntc,ncp21wb473" -<DEPRECATED> "ntc,ncp03wb473" -<DEPRECATED> "ntc,ncp15wl333" - -- "pullup-uv" Pull up voltage in micro volts -- "pullup-ohm" Pull up resistor value in ohms -- "pulldown-ohm" Pull down resistor value in ohms -- "connected-positive" Always ON, If not specified. - Status change is possible. -- "io-channels" Channel node of ADC to be used for - conversion. - -Optional node properties: -- "#thermal-sensor-cells" Used to expose itself to thermal fw. - -Read more about iio bindings at - https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/ - -Example: - ncp15wb473@0 { - compatible = "murata,ncp15wb473"; - pullup-uv = <1800000>; - pullup-ohm = <47000>; - pulldown-ohm = <0>; - io-channels = <&adc 3>; - }; |