summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/hwmon/pwm-fan.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/hwmon/pwm-fan.txt')
-rw-r--r--dts/Bindings/hwmon/pwm-fan.txt23
1 files changed, 20 insertions, 3 deletions
diff --git a/dts/Bindings/hwmon/pwm-fan.txt b/dts/Bindings/hwmon/pwm-fan.txt
index 49ca5d8..41b7676 100644
--- a/dts/Bindings/hwmon/pwm-fan.txt
+++ b/dts/Bindings/hwmon/pwm-fan.txt
@@ -7,13 +7,20 @@ Required properties:
which correspond to thermal cooling states
Optional properties:
-- fan-supply : phandle to the regulator that provides power to the fan
+- fan-supply : phandle to the regulator that provides power to the fan
+- interrupts : This contains a single interrupt specifier which
+ describes the tachometer output of the fan as an
+ interrupt source. The output signal must generate a
+ defined number of interrupts per fan revolution, which
+ require that it must be self resetting edge interrupts.
+ See interrupt-controller/interrupts.txt for the format.
+- pulses-per-revolution : define the tachometer pulses per fan revolution as
+ an integer (default is 2 interrupts per revolution).
+ The value must be greater than zero.
Example:
fan0: pwm-fan {
compatible = "pwm-fan";
- cooling-min-state = <0>;
- cooling-max-state = <3>;
#cooling-cells = <2>;
pwms = <&pwm 0 10000 0>;
cooling-levels = <0 102 170 230>;
@@ -38,3 +45,13 @@ Example:
};
};
};
+
+Example 2:
+ fan0: pwm-fan {
+ compatible = "pwm-fan";
+ pwms = <&pwm 0 40000 0>;
+ fan-supply = <&reg_fan>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ pulses-per-revolution = <2>;
+ };