diff options
Diffstat (limited to 'dts/Bindings/hwmon')
54 files changed, 1666 insertions, 314 deletions
diff --git a/dts/Bindings/hwmon/adi,adm1177.yaml b/dts/Bindings/hwmon/adi,adm1177.yaml index d794deb08b..be7e9e91a3 100644 --- a/dts/Bindings/hwmon/adi,adm1177.yaml +++ b/dts/Bindings/hwmon/adi,adm1177.yaml @@ -27,7 +27,7 @@ properties: shunt-resistor-micro-ohms: description: - The value of curent sense resistor in microohms. If not provided, + The value of current sense resistor in microohms. If not provided, the current reading and overcurrent alert is disabled. adi,shutdown-threshold-microamp: @@ -46,22 +46,25 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; pwmon@5a { - compatible = "adi,adm1177"; - reg = <0x5a>; - shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */ - adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */ - adi,vrange-high-enable; + compatible = "adi,adm1177"; + reg = <0x5a>; + shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */ + adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */ + adi,vrange-high-enable; }; }; ... diff --git a/dts/Bindings/hwmon/adi,adm1266.yaml b/dts/Bindings/hwmon/adi,adm1266.yaml index 43b4f4f57b..4f8e11bd51 100644 --- a/dts/Bindings/hwmon/adi,adm1266.yaml +++ b/dts/Bindings/hwmon/adi,adm1266.yaml @@ -39,13 +39,13 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; adm1266@40 { - compatible = "adi,adm1266"; - reg = <0x40>; + compatible = "adi,adm1266"; + reg = <0x40>; }; }; ... diff --git a/dts/Bindings/hwmon/adi,adm1275.yaml b/dts/Bindings/hwmon/adi,adm1275.yaml index ab87f51c5a..b680612949 100644 --- a/dts/Bindings/hwmon/adi,adm1275.yaml +++ b/dts/Bindings/hwmon/adi,adm1275.yaml @@ -33,10 +33,6 @@ properties: reg: maxItems: 1 - shunt-resistor-micro-ohms: - description: - Shunt resistor value in micro-Ohm. - adi,volt-curr-sample-average: description: | Number of samples to be used to report voltage and current values. @@ -50,6 +46,7 @@ properties: enum: [1, 2, 4, 8, 16, 32, 64, 128] allOf: + - $ref: hwmon-common.yaml# - if: properties: compatible: @@ -107,7 +104,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/hwmon/adi,axi-fan-control.yaml b/dts/Bindings/hwmon/adi,axi-fan-control.yaml index 6747b870f2..6751f9b643 100644 --- a/dts/Bindings/hwmon/adi,axi-fan-control.yaml +++ b/dts/Bindings/hwmon/adi,axi-fan-control.yaml @@ -5,13 +5,13 @@ $id: http://devicetree.org/schemas/hwmon/adi,axi-fan-control.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analog Devices AXI FAN Control Device Tree Bindings +title: Analog Devices AXI FAN Control maintainers: - Nuno Sá <nuno.sa@analog.com> description: |+ - Bindings for the Analog Devices AXI FAN Control driver. Spefications of the + Bindings for the Analog Devices AXI FAN Control driver. Specifications of the core can be found in: https://wiki.analog.com/resources/fpga/docs/axi_fan_control @@ -49,15 +49,15 @@ additionalProperties: false examples: - | fpga_axi: fpga-axi { - #address-cells = <0x2>; - #size-cells = <0x1>; - - axi_fan_control: axi-fan-control@80000000 { - compatible = "adi,axi-fan-control-1.00.a"; - reg = <0x0 0x80000000 0x10000>; - clocks = <&clk 71>; - interrupts = <0 110 0>; - pulses-per-revolution = <2>; - }; + #address-cells = <0x2>; + #size-cells = <0x1>; + + axi_fan_control: axi-fan-control@80000000 { + compatible = "adi,axi-fan-control-1.00.a"; + reg = <0x0 0x80000000 0x10000>; + clocks = <&clk 71>; + interrupts = <0 110 0>; + pulses-per-revolution = <2>; + }; }; ... diff --git a/dts/Bindings/hwmon/adi,ltc2945.yaml b/dts/Bindings/hwmon/adi,ltc2945.yaml new file mode 100644 index 0000000000..6401b0a9af --- /dev/null +++ b/dts/Bindings/hwmon/adi,ltc2945.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,ltc2945.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2945 wide range i2c power monitor + +maintainers: + - Guenter Roeck <linux@roeck-us.net> + +description: | + Analog Devices LTC2945 wide range i2c power monitor over I2C. + + https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2945.pdf + +properties: + compatible: + enum: + - adi,ltc2945 + + reg: + maxItems: 1 + + shunt-resistor-micro-ohms: + description: + Shunt resistor value in micro-Ohms + default: 1000 + +required: + - compatible + - reg + +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + power-monitor@6e { + compatible = "adi,ltc2945"; + reg = <0x6e>; + /* 10 milli-Ohm shunt resistor */ + shunt-resistor-micro-ohms = <10000>; + }; + }; +... diff --git a/dts/Bindings/hwmon/adi,ltc2947.yaml b/dts/Bindings/hwmon/adi,ltc2947.yaml index bf04151b63..152935334c 100644 --- a/dts/Bindings/hwmon/adi,ltc2947.yaml +++ b/dts/Bindings/hwmon/adi,ltc2947.yaml @@ -87,15 +87,15 @@ additionalProperties: false examples: - | spi { - #address-cells = <1>; - #size-cells = <0>; - - ltc2947_spi: ltc2947@0 { - compatible = "adi,ltc2947"; - reg = <0>; - /* accumulation takes place always for energ1/charge1. */ - /* accumulation only on positive current for energy2/charge2. */ - adi,accumulator-ctl-pol = <0 1>; - }; + #address-cells = <1>; + #size-cells = <0>; + + ltc2947_spi: ltc2947@0 { + compatible = "adi,ltc2947"; + reg = <0>; + /* accumulation takes place always for energ1/charge1. */ + /* accumulation only on positive current for energy2/charge2. */ + adi,accumulator-ctl-pol = <0 1>; + }; }; ... diff --git a/dts/Bindings/hwmon/adi,ltc2991.yaml b/dts/Bindings/hwmon/adi,ltc2991.yaml new file mode 100644 index 0000000000..011e5b65c7 --- /dev/null +++ b/dts/Bindings/hwmon/adi,ltc2991.yaml @@ -0,0 +1,128 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/adi,ltc2991.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC2991 Octal I2C Voltage, Current and Temperature Monitor + +maintainers: + - Antoniu Miclaus <antoniu.miclaus@analog.com> + +description: | + The LTC2991 is used to monitor system temperatures, voltages and currents. + Through the I2C serial interface, the eight monitors can individually measure + supply voltages and can be paired for differential measurements of current + sense resistors or temperature sensing transistors. + + Datasheet: + https://www.analog.com/en/products/ltc2991.html + +properties: + compatible: + const: adi,ltc2991 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + vcc-supply: true + +patternProperties: + "^channel@[0-3]$": + type: object + description: + Represents the differential/temperature channels. + + properties: + reg: + description: + The channel number. LTC2991 can monitor 4 currents/temperatures. + items: + minimum: 0 + maximum: 3 + + shunt-resistor-micro-ohms: + description: + The value of curent sense resistor in micro ohms. Pin configuration is + set for differential input pair. + + adi,temperature-enable: + description: + Enables temperature readings. Pin configuration is set for remote + diode temperature measurement. + type: boolean + + required: + - reg + + allOf: + - if: + required: + - shunt-resistor-micro-ohms + then: + properties: + adi,temperature-enable: false + + additionalProperties: false + +required: + - compatible + - reg + - vcc-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hwmon@48 { + compatible = "adi,ltc2991"; + reg = <0x48>; + vcc-supply = <&vcc>; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hwmon@48 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "adi,ltc2991"; + reg = <0x48>; + vcc-supply = <&vcc>; + + channel@0 { + reg = <0x0>; + shunt-resistor-micro-ohms = <100000>; + }; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <100000>; + }; + + channel@2 { + reg = <0x2>; + adi,temperature-enable; + }; + + channel@3 { + reg = <0x3>; + adi,temperature-enable; + }; + }; + }; +... diff --git a/dts/Bindings/hwmon/adi,ltc2992.yaml b/dts/Bindings/hwmon/adi,ltc2992.yaml index 64a8fcb7bc..0ad12d2456 100644 --- a/dts/Bindings/hwmon/adi,ltc2992.yaml +++ b/dts/Bindings/hwmon/adi,ltc2992.yaml @@ -32,6 +32,7 @@ properties: patternProperties: "^channel@([0-1])$": type: object + additionalProperties: false description: | Represents the two supplies to be monitored. @@ -45,7 +46,7 @@ patternProperties: shunt-resistor-micro-ohms: description: - The value of curent sense resistor in microohms. + The value of current sense resistor in microohms. required: - compatible @@ -55,26 +56,26 @@ additionalProperties: false examples: - | - i2c1 { + i2c { #address-cells = <1>; #size-cells = <0>; - ltc2992@6F { - #address-cells = <1>; - #size-cells = <0>; + ltc2992@6f { + #address-cells = <1>; + #size-cells = <0>; - compatible = "adi,ltc2992"; - reg = <0x6F>; + compatible = "adi,ltc2992"; + reg = <0x6f>; - channel@0 { - reg = <0x0>; - shunt-resistor-micro-ohms = <10000>; - }; + channel@0 { + reg = <0x0>; + shunt-resistor-micro-ohms = <10000>; + }; - channel@1 { - reg = <0x1>; - shunt-resistor-micro-ohms = <10000>; - }; + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <10000>; + }; }; }; ... diff --git a/dts/Bindings/hwmon/adi,ltc4282.yaml b/dts/Bindings/hwmon/adi,ltc4282.yaml new file mode 100644 index 0000000000..4854b95a93 --- /dev/null +++ b/dts/Bindings/hwmon/adi,ltc4282.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,ltc4282.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C + +maintainers: + - Nuno Sa <nuno.sa@analog.com> + +description: | + Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C. + + https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4282.pdf + +properties: + compatible: + enum: + - adi,ltc4282 + + reg: + maxItems: 1 + + vdd-supply: true + + clocks: + maxItems: 1 + + '#clock-cells': + const: 0 + + adi,rsense-nano-ohms: + description: Value of the sense resistor. + + adi,vin-mode-microvolt: + description: + Selects operating range for the Undervoltage, Overvoltage and Foldback + pins. Also for the ADC. Should be set to the nominal input voltage. + enum: [3300000, 5000000, 12000000, 24000000] + default: 12000000 + + adi,fet-bad-timeout-ms: + description: + From the moment a FET bad conditions is present, this property selects the + wait time/timeout for a FET-bad fault to be signaled. Setting this to 0, + disables FET bad faults to be reported. + default: 255 + maximum: 255 + + adi,overvoltage-dividers: + description: | + Select which dividers to use for VDD Overvoltage detection. Note that + when the internal dividers are used the threshold is referenced to VDD. + The percentages in the datasheet are misleading since the actual values + to look for are in the "Absolute Maximum Ratings" table in the + "Comparator Inputs" section. In there there's a line for each of the 5%, + 10% and 15% settings with the actual min, typical and max tolerances. + $ref: /schemas/types.yaml#/definitions/string + enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent] + default: external + + adi,undervoltage-dividers: + description: | + Select which dividers to use for VDD Overvoltage detection. Note that + when the internal dividers are used the threshold is referenced to VDD. + The percentages in the datasheet are misleading since the actual values + to look for are in the "Absolute Maximum Ratings" table in the + "Comparator Inputs" section. In there there's a line for each of the 5%, + 10% and 15% settings with the actual min, typical and max tolerances. + $ref: /schemas/types.yaml#/definitions/string + enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent] + default: external + + adi,current-limit-sense-microvolt: + description: + The current limit sense voltage of the chip is adjustable between + 12.5mV and 34.4mV in 3.1mV steps. This effectively limits the current + on the load. + enum: [12500, 15625, 18750, 21875, 25000, 28125, 31250, 34375] + default: 25000 + + adi,overcurrent-retry: + description: + If set, enables the chip to auto-retry 256 timer cycles after an + Overcurrent fault. + type: boolean + + adi,overvoltage-retry-disable: + description: + If set, disables the chip to auto-retry 50ms after an Overvoltage fault. + It's enabled by default. + type: boolean + + adi,undervoltage-retry-disable: + description: + If set, disables the chip to auto-retry 50ms after an Undervoltage fault. + It's enabled by default. + type: boolean + + adi,fault-log-enable: + description: + If set, enables the FAULT_LOG and ADC_ALERT_LOG registers to be written + to the EEPROM when a fault bit transitions high and hence, will be + available after a power cycle (the chip loads the contents of + the EE_FAULT_LOG register - the one in EEPROM - into FAULT_LOG at boot). + type: boolean + + adi,gpio1-mode: + description: Defines the function of the Pin. It can indicate that power is + good (PULL the pin low when power is not good) or that power is bad (Go + into high-z when power is not good). + $ref: /schemas/types.yaml#/definitions/string + enum: [power_bad, power_good] + default: power_good + + adi,gpio2-mode: + description: Defines the function of the Pin. It can be set as the input for + the ADC or indicating that the MOSFET is in stress (dissipating power). + $ref: /schemas/types.yaml#/definitions/string + enum: [adc_input, stress_fet] + default: adc_input + + adi,gpio3-monitor-enable: + description: If set, gpio3 is set as input for the ADC instead of gpio2. + type: boolean + +allOf: + - if: + required: + - adi,gpio3-monitor-enable + then: + properties: + adi,gpio2-mode: + const: stress_fet + +required: + - compatible + - reg + - adi,rsense-nano-ohms + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hwmon@50 { + compatible = "adi,ltc4282"; + reg = <0x50>; + adi,rsense-nano-ohms = <500>; + + adi,gpio1-mode = "power_good"; + adi,gpio2-mode = "adc_input"; + }; + }; +... diff --git a/dts/Bindings/hwmon/adi,max31760.yaml b/dts/Bindings/hwmon/adi,max31760.yaml new file mode 100644 index 0000000000..9f2d08d7b9 --- /dev/null +++ b/dts/Bindings/hwmon/adi,max31760.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,max31760.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX31760 Fan-Speed Controller + +maintainers: + - Ibrahim Tilki <Ibrahim.Tilki@analog.com> + +description: | + Analog Devices MAX31760 Fan-Speed Controller + https://datasheets.maximintegrated.com/en/ds/MAX31760.pdf + +properties: + compatible: + enum: + - adi,max31760 + + reg: + description: I2C address of slave device. + minimum: 0x50 + maximum: 0x57 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + fan-controller@50 { + reg = <0x50>; + compatible = "adi,max31760"; + }; + }; diff --git a/dts/Bindings/hwmon/adi,max31827.yaml b/dts/Bindings/hwmon/adi,max31827.yaml new file mode 100644 index 0000000000..f60e06ab7d --- /dev/null +++ b/dts/Bindings/hwmon/adi,max31827.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/adi,max31827.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch + +maintainers: + - Daniel Matyas <daniel.matyas@analog.com> + +description: | + Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch with + I2C Interface + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf + +properties: + compatible: + oneOf: + - const: adi,max31827 + - items: + - enum: + - adi,max31828 + - adi,max31829 + - const: adi,max31827 + + reg: + maxItems: 1 + + vref-supply: + description: + Must have values in the interval (1.6V; 3.6V) in order for the device to + function correctly. + + adi,comp-int: + description: + If present interrupt mode is used. If not present comparator mode is used + (default). + type: boolean + + adi,alarm-pol: + description: + Sets the alarms active state. + - 0 = active low + - 1 = active high + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + adi,fault-q: + description: + Select how many consecutive temperature faults must occur before + overtemperature or undertemperature faults are indicated in the + corresponding status bits. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] + + adi,timeout-enable: + description: + Enables timeout. Bus timeout resets the I2C-compatible interface when SCL + is low for more than 30ms (nominal). + type: boolean + +allOf: + - if: + properties: + compatible: + contains: + const: adi,max31829 + + then: + properties: + adi,alarm-pol: + default: 1 + + else: + properties: + adi,alarm-pol: + default: 0 + + - if: + properties: + compatible: + contains: + const: adi,max31827 + + then: + properties: + adi,fault-q: + default: 1 + + else: + properties: + adi,fault-q: + default: 4 + + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@42 { + compatible = "adi,max31827"; + reg = <0x42>; + vref-supply = <®_vdd>; + adi,comp-int; + adi,alarm-pol = <0>; + adi,fault-q = <1>; + adi,timeout-enable; + }; + }; +... diff --git a/dts/Bindings/hwmon/adt7475.yaml b/dts/Bindings/hwmon/adt7475.yaml index ea595102a8..051c976ab7 100644 --- a/dts/Bindings/hwmon/adt7475.yaml +++ b/dts/Bindings/hwmon/adt7475.yaml @@ -61,7 +61,7 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] - "adi,pin(5|10)-function": + "^adi,pin(5|10)-function$": description: | Configures the function for pin 5 on the adi,adt7473 and adi,adt7475. Or pin 10 on the adi,adt7476 and adi,adt7490. @@ -70,7 +70,7 @@ patternProperties: - pwm2 - smbalert# - "adi,pin(9|14)-function": + "^adi,pin(9|14)-function$": description: | Configures the function for pin 9 on the adi,adt7473 and adi,adt7475. Or pin 14 on the adi,adt7476 and adi,adt7490 diff --git a/dts/Bindings/hwmon/amd,sbrmi.yaml b/dts/Bindings/hwmon/amd,sbrmi.yaml index 7598b08397..353d81d89b 100644 --- a/dts/Bindings/hwmon/amd,sbrmi.yaml +++ b/dts/Bindings/hwmon/amd,sbrmi.yaml @@ -41,13 +41,13 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; sbrmi@3c { - compatible = "amd,sbrmi"; - reg = <0x3c>; + compatible = "amd,sbrmi"; + reg = <0x3c>; }; }; ... diff --git a/dts/Bindings/hwmon/amd,sbtsi.yaml b/dts/Bindings/hwmon/amd,sbtsi.yaml index 446b09f1ce..75088244a2 100644 --- a/dts/Bindings/hwmon/amd,sbtsi.yaml +++ b/dts/Bindings/hwmon/amd,sbtsi.yaml @@ -42,13 +42,13 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; sbtsi@4c { - compatible = "amd,sbtsi"; - reg = <0x4c>; + compatible = "amd,sbtsi"; + reg = <0x4c>; }; }; ... diff --git a/dts/Bindings/hwmon/amphenol,chipcap2.yaml b/dts/Bindings/hwmon/amphenol,chipcap2.yaml new file mode 100644 index 0000000000..17351fdbef --- /dev/null +++ b/dts/Bindings/hwmon/amphenol,chipcap2.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/amphenol,chipcap2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ChipCap 2 humidity and temperature iio sensor + +maintainers: + - Javier Carrasco <javier.carrasco.cruz@gmail.com> + +description: | + Relative humidity and temperature sensor on I2C bus. + + Datasheets: + https://www.amphenol-sensors.com/en/telaire/humidity/527-humidity-sensors/3095-chipcap-2 + +properties: + compatible: + oneOf: + - const: amphenol,cc2d23 + - items: + - enum: + - amphenol,cc2d23s + - amphenol,cc2d25 + - amphenol,cc2d25s + - amphenol,cc2d33 + - amphenol,cc2d33s + - amphenol,cc2d35 + - amphenol,cc2d35s + - const: amphenol,cc2d23 + + reg: + maxItems: 1 + + interrupts: + items: + - description: measurement ready indicator + - description: low humidity alarm + - description: high humidity alarm + + interrupt-names: + items: + - const: ready + - const: low + - const: high + + vdd-supply: + description: + Dedicated, controllable supply-regulator to reset the device and + enter in command mode. + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + humidity@28 { + compatible = "amphenol,cc2d23s", "amphenol,cc2d23"; + reg = <0x28>; + interrupt-parent = <&gpio>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>, + <5 IRQ_TYPE_EDGE_RISING>, + <6 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ready", "low", "high"; + vdd-supply = <®_vdd>; + }; + }; diff --git a/dts/Bindings/hwmon/aspeed,g6-pwm-tach.yaml b/dts/Bindings/hwmon/aspeed,g6-pwm-tach.yaml new file mode 100644 index 0000000000..9e5ed901ae --- /dev/null +++ b/dts/Bindings/hwmon/aspeed,g6-pwm-tach.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2023 Aspeed, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/aspeed,g6-pwm-tach.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ASPEED G6 PWM and Fan Tach controller + +maintainers: + - Billy Tsai <billy_tsai@aspeedtech.com> + +description: | + The ASPEED PWM controller can support up to 16 PWM outputs. + The ASPEED Fan Tacho controller can support up to 16 fan tach input. + They are independent hardware blocks, which are different from the + previous version of the ASPEED chip. + +properties: + compatible: + enum: + - aspeed,ast2600-pwm-tach + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + "#pwm-cells": + const: 3 + +patternProperties: + "^fan-[0-9]+$": + $ref: fan-common.yaml# + unevaluatedProperties: false + required: + - tach-ch + +required: + - reg + - clocks + - resets + - "#pwm-cells" + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/aspeed-clock.h> + pwm_tach: pwm-tach-controller@1e610000 { + compatible = "aspeed,ast2600-pwm-tach"; + reg = <0x1e610000 0x100>; + clocks = <&syscon ASPEED_CLK_AHB>; + resets = <&syscon ASPEED_RESET_PWM>; + #pwm-cells = <3>; + + fan-0 { + tach-ch = /bits/ 8 <0x0>; + pwms = <&pwm_tach 0 40000 0>; + }; + + fan-1 { + tach-ch = /bits/ 8 <0x1 0x2>; + pwms = <&pwm_tach 1 40000 0>; + }; + }; diff --git a/dts/Bindings/hwmon/aspeed-pwm-tacho.txt b/dts/Bindings/hwmon/aspeed-pwm-tacho.txt index 3ac02988a1..8645cd3b86 100644 --- a/dts/Bindings/hwmon/aspeed-pwm-tacho.txt +++ b/dts/Bindings/hwmon/aspeed-pwm-tacho.txt @@ -45,7 +45,7 @@ Required properties for each child node: - aspeed,fan-tach-ch : should specify the Fan tach input channel. integer value in the range 0 through 15, with 0 indicating Fan tach channel 0 and 15 indicating Fan tach channel 15. - Atleast one Fan tach input channel is required. + At least one Fan tach input channel is required. Examples: diff --git a/dts/Bindings/hwmon/fan-common.yaml b/dts/Bindings/hwmon/fan-common.yaml new file mode 100644 index 0000000000..0fb7380816 --- /dev/null +++ b/dts/Bindings/hwmon/fan-common.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/fan-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common Fan Properties + +maintainers: + - Naresh Solanki <naresh.solanki@9elements.com> + - Billy Tsai <billy_tsai@aspeedtech.com> + +properties: + max-rpm: + description: + Max RPM supported by fan. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 100000 + + min-rpm: + description: + Min RPM supported by fan. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 1000 + + pulses-per-revolution: + description: + The number of pulse from fan sensor per revolution. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 4 + + tach-div: + description: + Divisor for the tach sampling clock, which determines the sensitivity of the tach pin. + $ref: /schemas/types.yaml#/definitions/uint32 + + target-rpm: + description: + The default desired fan speed in RPM. + $ref: /schemas/types.yaml#/definitions/uint32 + + fan-driving-mode: + description: + Select the driving mode of the fan.(DC, PWM and so on) + $ref: /schemas/types.yaml#/definitions/string + enum: [ dc, pwm ] + + pwms: + description: + PWM provider. + maxItems: 1 + + "#cooling-cells": + const: 2 + + cooling-levels: + description: + The control value which correspond to thermal cooling states. + $ref: /schemas/types.yaml#/definitions/uint32-array + + tach-ch: + description: + The tach channel used for the fan. + $ref: /schemas/types.yaml#/definitions/uint8-array + + label: + description: + Optional fan label + + fan-supply: + description: + Power supply for fan. + + reg: + maxItems: 1 + +additionalProperties: true + +... diff --git a/dts/Bindings/hwmon/gpio-fan.txt b/dts/Bindings/hwmon/gpio-fan.txt deleted file mode 100644 index f4cfa350f6..0000000000 --- a/dts/Bindings/hwmon/gpio-fan.txt +++ /dev/null @@ -1,41 +0,0 @@ -Bindings for fan connected to GPIO lines - -Required properties: -- compatible : "gpio-fan" - -Optional properties: -- gpios: Specifies the pins that map to bits in the control value, - ordered MSB-->LSB. -- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the - control value that should be set to achieve them. This array - must have the RPM values in ascending order. -- alarm-gpios: This pin going active indicates something is wrong with - the fan, and a udev event will be fired. -- #cooling-cells: If used as a cooling device, must be <2> - Also see: - Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml - min and max states are derived from the speed-map of the fan. - -Note: At least one the "gpios" or "alarm-gpios" properties must be set. - -Examples: - - gpio_fan { - compatible = "gpio-fan"; - gpios = <&gpio1 14 1 - &gpio1 13 1>; - gpio-fan,speed-map = <0 0 - 3000 1 - 6000 2>; - alarm-gpios = <&gpio1 15 1>; - }; - gpio_fan_cool: gpio_fan { - compatible = "gpio-fan"; - gpios = <&gpio2 14 1 - &gpio2 13 1>; - gpio-fan,speed-map = <0 0>, - <3000 1>, - <6000 2>; - alarm-gpios = <&gpio2 15 1>; - #cooling-cells = <2>; /* min followed by max */ - }; diff --git a/dts/Bindings/hwmon/gpio-fan.yaml b/dts/Bindings/hwmon/gpio-fan.yaml new file mode 100644 index 0000000000..7f30cfc873 --- /dev/null +++ b/dts/Bindings/hwmon/gpio-fan.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/gpio-fan.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fan connected to GPIO lines + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + compatible: + const: gpio-fan + + gpios: + description: | + Specifies the pins that map to bits in the control value, + ordered MSB-->LSB. + minItems: 1 + maxItems: 7 + + alarm-gpios: + maxItems: 1 + + gpio-fan,speed-map: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 2 + maxItems: 127 + items: + items: + - description: fan speed in RPMs + - description: control value + description: | + A mapping of possible fan RPM speeds and the + control value that should be set to achieve them. This array + must have the RPM values in ascending order. + + '#cooling-cells': + const: 2 + +required: + - compatible + - gpios + - gpio-fan,speed-map + +additionalProperties: false + +examples: + - | + gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio2 14 1 + &gpio2 13 1>; + gpio-fan,speed-map = < 0 0>, + <3000 1>, + <6000 2>; + alarm-gpios = <&gpio2 15 1>; + #cooling-cells = <2>; /* min followed by max */ + }; diff --git a/dts/Bindings/hwmon/hpe,gxp-fan-ctrl.yaml b/dts/Bindings/hwmon/hpe,gxp-fan-ctrl.yaml new file mode 100644 index 0000000000..4a52aac6be --- /dev/null +++ b/dts/Bindings/hwmon/hpe,gxp-fan-ctrl.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/hpe,gxp-fan-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HPE GXP Fan Controller + +maintainers: + - Nick Hawkins <nick.hawkins@hpe.com> + +description: | + The HPE GXP fan controller controls the fans through an external CPLD + device that connects to the fans. + +properties: + compatible: + const: hpe,gxp-fan-ctrl + + reg: + items: + - description: Fan controller PWM + - description: Programmable logic + - description: Function 2 + + reg-names: + items: + - const: base + - const: pl + - const: fn2 + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + fan-controller@1000c00 { + compatible = "hpe,gxp-fan-ctrl"; + reg = <0x1000c00 0x200>, <0xd1000000 0xff>, <0x80200000 0x100000>; + reg-names = "base", "pl", "fn2"; + }; diff --git a/dts/Bindings/hwmon/hwmon-common.yaml b/dts/Bindings/hwmon/hwmon-common.yaml new file mode 100644 index 0000000000..dc86b5c72c --- /dev/null +++ b/dts/Bindings/hwmon/hwmon-common.yaml @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/hwmon-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hardware Monitoring Devices Common Properties + +maintainers: + - Guenter Roeck <linux@roeck-us.net> + +properties: + label: + description: A descriptive name for this device. + + shunt-resistor-micro-ohms: + description: The value of current sense resistor. + +additionalProperties: true diff --git a/dts/Bindings/hwmon/ibm,occ-hwmon.yaml b/dts/Bindings/hwmon/ibm,occ-hwmon.yaml new file mode 100644 index 0000000000..3dbdc5af28 --- /dev/null +++ b/dts/Bindings/hwmon/ibm,occ-hwmon.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ibm,occ-hwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IBM On-Chip Controller (OCC) accessed from a service processor + +maintainers: + - Eddie James <eajames@linux.ibm.com> + +description: | + The POWER processor On-Chip Controller (OCC) helps manage power and + thermals for the system. A service processor or baseboard management + controller can query the OCC for it's power and thermal data to report + through hwmon. + +properties: + compatible: + enum: + - ibm,p9-occ-hwmon + - ibm,p10-occ-hwmon + + ibm,no-poll-on-init: + description: This property describes whether or not the OCC should + be polled during driver initialization. + type: boolean + +required: + - compatible + +additionalProperties: false + +examples: + - | + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; diff --git a/dts/Bindings/hwmon/iio-hwmon.yaml b/dts/Bindings/hwmon/iio-hwmon.yaml index f5a6cc3efd..be5c7d4579 100644 --- a/dts/Bindings/hwmon/iio-hwmon.yaml +++ b/dts/Bindings/hwmon/iio-hwmon.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/hwmon/iio-hwmon.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/hwmon/iio-hwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: ADC-attached Hardware Sensor Device Tree Bindings +title: ADC-attached Hardware Sensor maintainers: - Jonathan Cameron <jic23@kernel.org> @@ -19,7 +19,7 @@ properties: io-channels: minItems: 1 - maxItems: 8 # Should be enough + maxItems: 51 # Should be enough description: > List of phandles to ADC channels to read the monitoring values @@ -31,7 +31,7 @@ additionalProperties: false examples: - | - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&adc 1>, <&adc 2>; - }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 1>, <&adc 2>; + }; diff --git a/dts/Bindings/hwmon/ina3221.txt b/dts/Bindings/hwmon/ina3221.txt deleted file mode 100644 index fa63b61714..0000000000 --- a/dts/Bindings/hwmon/ina3221.txt +++ /dev/null @@ -1,54 +0,0 @@ -Texas Instruments INA3221 Device Tree Bindings - -1) ina3221 node - Required properties: - - compatible: Must be "ti,ina3221" - - reg: I2C address - - Optional properties: - - ti,single-shot: This chip has two power modes: single-shot (chip takes one - measurement and then shuts itself down) and continuous ( - chip takes continuous measurements). The continuous mode is - more reliable and suitable for hardware monitor type device, - but the single-shot mode is more power-friendly and useful - for battery-powered device which cares power consumptions - while still needs some measurements occasionally. - If this property is present, the single-shot mode will be - used, instead of the default continuous one for monitoring. - - = The node contains optional child nodes for three channels = - = Each child node describes the information of input source = - - - #address-cells: Required only if a child node is present. Must be 1. - - #size-cells: Required only if a child node is present. Must be 0. - -2) child nodes - Required properties: - - reg: Must be 0, 1 or 2, corresponding to IN1, IN2 or IN3 port of INA3221 - - Optional properties: - - label: Name of the input source - - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm - -Example: - -ina3221@40 { - compatible = "ti,ina3221"; - reg = <0x40>; - #address-cells = <1>; - #size-cells = <0>; - - input@0 { - reg = <0x0>; - status = "disabled"; - }; - input@1 { - reg = <0x1>; - shunt-resistor-micro-ohms = <5000>; - }; - input@2 { - reg = <0x2>; - label = "VDD_5V"; - shunt-resistor-micro-ohms = <5000>; - }; -}; diff --git a/dts/Bindings/hwmon/jedec,jc42.yaml b/dts/Bindings/hwmon/jedec,jc42.yaml index 0e49b39011..bf3332153a 100644 --- a/dts/Bindings/hwmon/jedec,jc42.yaml +++ b/dts/Bindings/hwmon/jedec,jc42.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/jedec,jc42.yaml# diff --git a/dts/Bindings/hwmon/lltc,ltc4151.yaml b/dts/Bindings/hwmon/lltc,ltc4151.yaml index b1a4c23537..8f0095bb7f 100644 --- a/dts/Bindings/hwmon/lltc,ltc4151.yaml +++ b/dts/Bindings/hwmon/lltc,ltc4151.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/lltc,ltc4151.yaml# @@ -25,7 +25,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/hwmon/lltc,ltc4286.yaml b/dts/Bindings/hwmon/lltc,ltc4286.yaml new file mode 100644 index 0000000000..853df9fef6 --- /dev/null +++ b/dts/Bindings/hwmon/lltc,ltc4286.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/lltc,ltc4286.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LTC4286 power monitors + +maintainers: + - Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com> + +properties: + compatible: + enum: + - lltc,ltc4286 + - lltc,ltc4287 + + reg: + maxItems: 1 + + adi,vrange-low-enable: + description: + This property is a bool parameter to represent the + voltage range is 25.6 volts or 102.4 volts for this chip. + The default is 102.4 volts. + type: boolean + +required: + - compatible + - reg + +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + power-monitor@40 { + compatible = "lltc,ltc4286"; + reg = <0x40>; + adi,vrange-low-enable; + shunt-resistor-micro-ohms = <300>; + }; + }; diff --git a/dts/Bindings/hwmon/lm75.yaml b/dts/Bindings/hwmon/lm75.yaml index 8226e3b5d0..29bd7460cc 100644 --- a/dts/Bindings/hwmon/lm75.yaml +++ b/dts/Bindings/hwmon/lm75.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/lm75.yaml# @@ -14,6 +14,7 @@ properties: compatible: enum: - adi,adt75 + - ams,as6200 - atmel,at30ts74 - dallas,ds1775 - dallas,ds75 @@ -48,11 +49,30 @@ properties: vs-supply: description: phandle to the regulator that provides the +VS supply + interrupts: + maxItems: 1 + required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + - if: + not: + properties: + compatible: + contains: + enum: + - ams,as6200 + - ti,tmp100 + - ti,tmp101 + - ti,tmp112 + then: + properties: + interrupts: false + +unevaluatedProperties: false examples: - | @@ -66,3 +86,17 @@ examples: vs-supply = <&vs>; }; }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@48 { + compatible = "ams,as6200"; + reg = <0x48>; + vs-supply = <&vs>; + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_EDGE_BOTH>; + }; + }; diff --git a/dts/Bindings/hwmon/lm87.txt b/dts/Bindings/hwmon/lm87.txt index e1b79903f2..758ff398b6 100644 --- a/dts/Bindings/hwmon/lm87.txt +++ b/dts/Bindings/hwmon/lm87.txt @@ -18,7 +18,7 @@ optional properties: in7. Otherwise the pin is set as FAN2 input. - vcc-supply: a Phandle for the regulator supplying power, can be - cofigured to measure 5.0V power supply. Default is 3.3V. + configured to measure 5.0V power supply. Default is 3.3V. Example: diff --git a/dts/Bindings/hwmon/ltq-cputemp.txt b/dts/Bindings/hwmon/ltq-cputemp.txt index 33fd00a987..473b34c876 100644 --- a/dts/Bindings/hwmon/ltq-cputemp.txt +++ b/dts/Bindings/hwmon/ltq-cputemp.txt @@ -1,4 +1,4 @@ -Lantiq cpu temperatur sensor +Lantiq cpu temperature sensor Requires node properties: - compatible value : diff --git a/dts/Bindings/hwmon/microchip,mcp3021.yaml b/dts/Bindings/hwmon/microchip,mcp3021.yaml index 028d6e5701..f5e104c1b0 100644 --- a/dts/Bindings/hwmon/microchip,mcp3021.yaml +++ b/dts/Bindings/hwmon/microchip,mcp3021.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/microchip,mcp3021.yaml# diff --git a/dts/Bindings/hwmon/microchip,sparx5-temp.yaml b/dts/Bindings/hwmon/microchip,sparx5-temp.yaml index 76be625d56..51e8619dbf 100644 --- a/dts/Bindings/hwmon/microchip,sparx5-temp.yaml +++ b/dts/Bindings/hwmon/microchip,sparx5-temp.yaml @@ -22,7 +22,7 @@ properties: clocks: items: - - description: AHB reference clock + - description: System reference clock '#thermal-sensor-cells': const: 0 @@ -40,5 +40,5 @@ examples: compatible = "microchip,sparx5-temp"; reg = <0x10508110 0xc>; #thermal-sensor-cells = <0>; - clocks = <&ahb_clk>; + clocks = <&sys_clk>; }; diff --git a/dts/Bindings/hwmon/moortec,mr75203.yaml b/dts/Bindings/hwmon/moortec,mr75203.yaml index 8ea97e7743..56db2292f0 100644 --- a/dts/Bindings/hwmon/moortec,mr75203.yaml +++ b/dts/Bindings/hwmon/moortec,mr75203.yaml @@ -4,11 +4,37 @@ $id: http://devicetree.org/schemas/hwmon/moortec,mr75203.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Moortec Semiconductor MR75203 PVT Controller bindings +title: Moortec Semiconductor MR75203 PVT Controller maintainers: - Rahul Tanwar <rtanwar@maxlinear.com> +description: | + A Moortec PVT (Process, Voltage, Temperature) monitoring logic design can + include many different units. + Such a design will usually consists of several Moortec's embedded analog IPs, + and a single Moortec controller (mr75203) to configure and control the IPs. + + Some of the Moortec's analog hard IPs that can be used in a design: + *) Temperature Sensor (TS) - used to monitor core temperature (e.g. mr74137). + *) Voltage Monitor (VM) - used to monitor voltage levels (e.g. mr74138). + *) Process Detector (PD) - used to assess silicon speed (e.g. mr74139). + *) Delay Chain - ring oscillator connected to the PD, used to measure IO + based transistors (e.g. mr76008 ring oscillator at 1.1V, mr76007 ring + oscillator at 1.8V). + *) Pre Scaler - provides divide-by-X scaling of input voltage, which can then + be presented for VM for measurement within its range (e.g. mr76006 - + divide by 2 pre-scaler). + + TS, VM & PD also include a digital interface, which consists of configuration + inputs and measurement outputs. + + Some of the units have number of series, each series can have slightly + different characteristics. + + The mr75203 binding describes configuration for the controller unit, but also + for some of the analog IPs. + properties: compatible: const: moortec,mr75203 @@ -16,7 +42,7 @@ properties: reg: items: - description: PVT common registers - - description: PVT temprature sensor registers + - description: PVT temperature sensor registers - description: PVT process detector registers - description: PVT voltage monitor registers @@ -44,12 +70,76 @@ properties: "#thermal-sensor-cells": const: 1 + moortec,vm-active-channels: + description: + Defines the number of channels per VM that are actually used and are + connected to some input source. + Maximum number of items - number of VMs. + Maximum value of each item - number of channels. + Minimum value of each item - 0 (which means entire VM sensor is not used). + $ref: /schemas/types.yaml#/definitions/uint8-array + + moortec,vm-pre-scaler-x2: + description: + Defines the channels that use a mr76006 pre-scaler to divide the input + source by 2. + The pre-scaler is used for input sources that exceed the VM input range. + The driver uses this information to present to the user with the actual + value of the voltage source. + For channels that are not listed, no pre-scaler is assumed. + Maximum number of items - total number of channels in all VMs. + Each channel should not appear more than once. + $ref: /schemas/types.yaml#/definitions/uint8-array + + moortec,ts-series: + description: + Definition of the temperature equation and coefficients that shall be + used to convert the digital output to value in milli-Celsius. + minimum: 5 + maximum: 6 + default: 5 + $ref: /schemas/types.yaml#/definitions/uint32 + + moortec,ts-coeff-g: + description: + G coefficient for temperature equation. + Default for series 5 = 60000 + Default for series 6 = 57400 + multipleOf: 100 + minimum: 1000 + $ref: /schemas/types.yaml#/definitions/uint32 + + moortec,ts-coeff-h: + description: + H coefficient for temperature equation. + Default for series 5 = 200000 + Default for series 6 = 249400 + multipleOf: 100 + minimum: 1000 + $ref: /schemas/types.yaml#/definitions/uint32 + + moortec,ts-coeff-cal5: + description: + cal5 coefficient for temperature equation. + Default for series 5 = 4094 + Default for series 6 = 4096 + minimum: 1 + $ref: /schemas/types.yaml#/definitions/uint32 + + moortec,ts-coeff-j: + description: + J coefficient for temperature equation. + Default for series 5 = -100 + Default for series 6 = 0 + multipleOf: 100 + maximum: 0 + $ref: /schemas/types.yaml#/definitions/int32 + required: - compatible - reg - reg-names - clocks - - resets - "#thermal-sensor-cells" additionalProperties: false @@ -66,5 +156,9 @@ examples: intel,vm-map = [03 01 04 ff ff]; clocks = <&osc0>; resets = <&rcu0 0x40 7>; + moortec,vm-active-channels = /bits/ 8 <0x10 0x05>; + moortec,vm-pre-scaler-x2 = /bits/ 8 <5 6 20>; + moortec,ts-coeff-g = <61400>; + moortec,ts-coeff-h = <253700>; #thermal-sensor-cells = <1>; }; diff --git a/dts/Bindings/hwmon/national,lm90.yaml b/dts/Bindings/hwmon/national,lm90.yaml index e1719839fa..6e59c8fdef 100644 --- a/dts/Bindings/hwmon/national,lm90.yaml +++ b/dts/Bindings/hwmon/national,lm90.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/national,lm90.yaml# @@ -198,30 +198,30 @@ examples: }; - | i2c { - #address-cells = <1>; - #size-cells = <0>; - - sensor@4c { - compatible = "adi,adt7481"; - reg = <0x4c>; #address-cells = <1>; #size-cells = <0>; - channel@0 { - reg = <0x0>; - label = "local"; - }; - - channel@1 { - reg = <0x1>; - label = "front"; - temperature-offset-millicelsius = <4000>; - }; - - channel@2 { - reg = <0x2>; - label = "back"; - temperature-offset-millicelsius = <750>; + sensor@4c { + compatible = "adi,adt7481"; + reg = <0x4c>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + label = "local"; + }; + + channel@1 { + reg = <0x1>; + label = "front"; + temperature-offset-millicelsius = <4000>; + }; + + channel@2 { + reg = <0x2>; + label = "back"; + temperature-offset-millicelsius = <750>; + }; }; - }; }; diff --git a/dts/Bindings/hwmon/npcm750-pwm-fan.txt b/dts/Bindings/hwmon/npcm750-pwm-fan.txt index 28f43e929f..18095ba87a 100644 --- a/dts/Bindings/hwmon/npcm750-pwm-fan.txt +++ b/dts/Bindings/hwmon/npcm750-pwm-fan.txt @@ -1,12 +1,16 @@ -Nuvoton NPCM7xx PWM and Fan Tacho controller device +Nuvoton NPCM PWM and Fan Tacho controller device The Nuvoton BMC NPCM7XX supports 8 Pulse-width modulation (PWM) controller outputs and 16 Fan tachometer controller inputs. +The Nuvoton BMC NPCM8XX supports 12 Pulse-width modulation (PWM) +controller outputs and 16 Fan tachometer controller inputs. + Required properties for pwm-fan node - #address-cells : should be 1. - #size-cells : should be 0. - compatible : "nuvoton,npcm750-pwm-fan" for Poleg NPCM7XX. + : "nuvoton,npcm845-pwm-fan" for Arbel NPCM8XX. - reg : specifies physical base address and size of the registers. - reg-names : must contain: * "pwm" for the PWM registers. @@ -23,7 +27,7 @@ Required properties for pwm-fan node fan subnode format: =================== Under fan subnode can be upto 8 child nodes, each child node representing a fan. -Each fan subnode must have one PWM channel and atleast one Fan tach channel. +Each fan subnode must have one PWM channel and at least one Fan tach channel. For PWM channel can be configured cooling-levels to create cooling device. Cooling device could be bound to a thermal zone for the thermal control. diff --git a/dts/Bindings/hwmon/ntc-thermistor.yaml b/dts/Bindings/hwmon/ntc-thermistor.yaml index 3d3b139a91..3d0146e20d 100644 --- a/dts/Bindings/hwmon/ntc-thermistor.yaml +++ b/dts/Bindings/hwmon/ntc-thermistor.yaml @@ -6,7 +6,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: NTC thermistor temperature sensors maintainers: - - Naveen Krishna Chatradhi <ch.naveen@samsung.com> - Linus Walleij <linus.walleij@linaro.org> description: | @@ -132,7 +131,7 @@ additionalProperties: false examples: - | - thermistor0 { + thermistor { compatible = "murata,ncp18wb473"; io-channels = <&gpadc 0x06>; pullup-uv = <1800000>; diff --git a/dts/Bindings/hwmon/nuvoton,nct6775.yaml b/dts/Bindings/hwmon/nuvoton,nct6775.yaml index 358b262431..e3db642878 100644 --- a/dts/Bindings/hwmon/nuvoton,nct6775.yaml +++ b/dts/Bindings/hwmon/nuvoton,nct6775.yaml @@ -25,6 +25,7 @@ properties: - nuvoton,nct6796 - nuvoton,nct6797 - nuvoton,nct6798 + - nuvoton,nct6799 reg: maxItems: 1 diff --git a/dts/Bindings/hwmon/nuvoton,nct7802.yaml b/dts/Bindings/hwmon/nuvoton,nct7802.yaml index 2f0620eccc..cd8dcd7970 100644 --- a/dts/Bindings/hwmon/nuvoton,nct7802.yaml +++ b/dts/Bindings/hwmon/nuvoton,nct7802.yaml @@ -123,23 +123,23 @@ examples: #size-cells = <0>; channel@0 { /* LTD */ - reg = <0>; + reg = <0>; }; channel@1 { /* RTD1 */ - reg = <1>; - sensor-type = "voltage"; + reg = <1>; + sensor-type = "voltage"; }; channel@2 { /* RTD2 */ - reg = <2>; - sensor-type = "temperature"; - temperature-mode = "thermal-diode"; + reg = <2>; + sensor-type = "temperature"; + temperature-mode = "thermal-diode"; }; channel@3 { /* RTD3 */ - reg = <3>; - sensor-type = "temperature"; + reg = <3>; + sensor-type = "temperature"; }; }; }; diff --git a/dts/Bindings/hwmon/nxp,mc34vr500.yaml b/dts/Bindings/hwmon/nxp,mc34vr500.yaml new file mode 100644 index 0000000000..48d654e521 --- /dev/null +++ b/dts/Bindings/hwmon/nxp,mc34vr500.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/nxp,mc34vr500.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP MC34VR500 hwmon sensor + +maintainers: + - Mario Kicherer <dev@kicherer.org> + +properties: + compatible: + enum: + - nxp,mc34vr500 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@8 { + compatible = "nxp,mc34vr500"; + reg = <0x08>; + }; + }; diff --git a/dts/Bindings/hwmon/pmbus/infineon,tda38640.yaml b/dts/Bindings/hwmon/pmbus/infineon,tda38640.yaml new file mode 100644 index 0000000000..5c4e52b472 --- /dev/null +++ b/dts/Bindings/hwmon/pmbus/infineon,tda38640.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/pmbus/infineon,tda38640.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Infineon TDA38640 Synchronous Buck Regulator with SVID and I2C + +maintainers: + - Naresh Solanki <naresh.solanki@9elements.com> + +description: | + The Infineon TDA38640 is a 40A Single-voltage Synchronous Buck + Regulator with SVID and I2C designed for Industrial use. + + Datasheet: https://www.infineon.com/dgdl/Infineon-TDA38640-0000-DataSheet-v02_04-EN.pdf?fileId=8ac78c8c80027ecd018042f2337f00c9 + +properties: + compatible: + enum: + - infineon,tda38640 + + reg: + maxItems: 1 + + infineon,en-pin-fixed-level: + description: + Indicates that the chip EN pin is at fixed level or left + unconnected(has internal pull-down). + type: boolean + + interrupts: + maxItems: 1 + + regulators: + type: object + description: + list of regulators provided by this controller. + + properties: + vout: + $ref: /schemas/regulator/regulator.yaml# + type: object + + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tda38640@40 { + compatible = "infineon,tda38640"; + reg = <0x40>; + + interrupt-parent = <&smb_pex_cpu0_event>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + + regulators { + pvnn_main_cpu0: vout { + regulator-name = "pvnn_main_cpu0"; + regulator-enable-ramp-delay = <200>; + }; + }; + }; + }; diff --git a/dts/Bindings/hwmon/pmbus/ti,lm25066.yaml b/dts/Bindings/hwmon/pmbus/ti,lm25066.yaml index da8292bc32..a20f140dc7 100644 --- a/dts/Bindings/hwmon/pmbus/ti,lm25066.yaml +++ b/dts/Bindings/hwmon/pmbus/ti,lm25066.yaml @@ -34,11 +34,26 @@ properties: Shunt (sense) resistor value in micro-Ohms default: 1000 + regulators: + type: object + + properties: + vout: + $ref: /schemas/regulator/regulator.yaml# + type: object + + unevaluatedProperties: false + + additionalProperties: false + required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/hwmon/hwmon-common.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/hwmon/pwm-fan.txt b/dts/Bindings/hwmon/pwm-fan.txt index 4509e68862..48886f0ce4 100644 --- a/dts/Bindings/hwmon/pwm-fan.txt +++ b/dts/Bindings/hwmon/pwm-fan.txt @@ -1,67 +1 @@ -Bindings for a fan connected to the PWM lines - -Required properties: -- compatible : "pwm-fan" -- pwms : the PWM that is used to control the PWM fan -- cooling-levels : PWM duty cycle values in a range from 0 to 255 - which correspond to thermal cooling states - -Optional properties: -- fan-supply : phandle to the regulator that provides power to the fan -- interrupts : This contains an interrupt specifier for each fan - tachometer output connected to an interrupt source. - The output signal must generate a defined number of - interrupts per fan revolution, which require that - it must be self resetting edge interrupts. See - interrupt-controller/interrupts.txt for the format. -- pulses-per-revolution : define the number of pulses per fan revolution for - each tachometer input as an integer (default is 2 - interrupts per revolution). The value must be - greater than zero. - -Example: - fan0: pwm-fan { - compatible = "pwm-fan"; - #cooling-cells = <2>; - pwms = <&pwm 0 10000 0>; - cooling-levels = <0 102 170 230>; - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - thermal-sensors = <&tmu 0>; - polling-delay-passive = <0>; - polling-delay = <0>; - trips { - cpu_alert1: cpu-alert1 { - temperature = <100000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - }; - cooling-maps { - map0 { - trip = <&cpu_alert1>; - cooling-device = <&fan0 0 1>; - }; - }; - }; - -Example 2: - fan0: pwm-fan { - compatible = "pwm-fan"; - pwms = <&pwm 0 40000 0>; - fan-supply = <®_fan>; - interrupt-parent = <&gpio5>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - pulses-per-revolution = <2>; - }; - -Example 3: - fan0: pwm-fan { - compatible = "pwm-fan"; - pwms = <&pwm1 0 25000 0>; - interrupts-extended = <&gpio1 1 IRQ_TYPE_EDGE_FALLING>, - <&gpio2 5 IRQ_TYPE_EDGE_FALLING>; - pulses-per-revolution = <2>, <1>; - }; +This file has moved to pwm-fan.yaml. diff --git a/dts/Bindings/hwmon/pwm-fan.yaml b/dts/Bindings/hwmon/pwm-fan.yaml new file mode 100644 index 0000000000..4e5abf7580 --- /dev/null +++ b/dts/Bindings/hwmon/pwm-fan.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/pwm-fan.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Fan connected to PWM lines + +maintainers: + - Jean Delvare <jdelvare@suse.com> + - Guenter Roeck <linux@roeck-us.net> + +properties: + compatible: + const: pwm-fan + + cooling-levels: + description: PWM duty cycle values corresponding to thermal cooling states. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + maximum: 255 + + fan-supply: + description: Phandle to the regulator that provides power to the fan. + + interrupts: + description: + This contains an interrupt specifier for each fan tachometer output + connected to an interrupt source. The output signal must generate a + defined number of interrupts per fan revolution, which require that + it must be self resetting edge interrupts. + maxItems: 1 + + pulses-per-revolution: + description: + Define the number of pulses per fan revolution for each tachometer + input as an integer. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + default: 2 + + pwms: + description: The PWM that is used to control the fan. + maxItems: 1 + + "#cooling-cells": true + +required: + - compatible + - pwms + +additionalProperties: false + +examples: + - | + pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 102 170 230>; + pwms = <&pwm 0 10000 0>; + #cooling-cells = <2>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + thermal-sensors = <&tmu 0>; + polling-delay-passive = <0>; + polling-delay = <0>; + + trips { + cpu_alert1: cpu-alert1 { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert1>; + cooling-device = <&fan0 0 1>; + }; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm 0 40000 0>; + fan-supply = <®_fan>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + pulses-per-revolution = <2>; + }; diff --git a/dts/Bindings/hwmon/sensirion,sht15.yaml b/dts/Bindings/hwmon/sensirion,sht15.yaml index 80df7182ea..14ac783c9a 100644 --- a/dts/Bindings/hwmon/sensirion,sht15.yaml +++ b/dts/Bindings/hwmon/sensirion,sht15.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/sensirion,sht15.yaml# diff --git a/dts/Bindings/hwmon/sensirion,shtc1.yaml b/dts/Bindings/hwmon/sensirion,shtc1.yaml index 7d49478d96..3d14d5fc96 100644 --- a/dts/Bindings/hwmon/sensirion,shtc1.yaml +++ b/dts/Bindings/hwmon/sensirion,shtc1.yaml @@ -10,10 +10,10 @@ maintainers: - Christopher Ruehl chris.ruehl@gtsys.com.hk description: | - The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor + The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensors designed especially for battery-driven high-volume consumer electronics applications. - For further information refere to Documentation/hwmon/shtc1.rst + For further information refer to Documentation/hwmon/shtc1.rst This binding document describes the binding for the hardware monitor portion of the driver. @@ -31,13 +31,13 @@ properties: sensirion,blocking-io: $ref: /schemas/types.yaml#/definitions/flag description: - If set, the driver hold the i2c bus until measurement is finished. + If set, the driver holds the i2c bus until the measurement is finished. sensirion,low-precision: $ref: /schemas/types.yaml#/definitions/flag description: - If set, the sensor aquire data with low precision (not recommended). - The driver aquire data with high precision by default. + If set, the sensor acquires data with low precision (not recommended). + The driver acquires data with high precision by default. required: - compatible diff --git a/dts/Bindings/hwmon/starfive,jh71x0-temp.yaml b/dts/Bindings/hwmon/starfive,jh71x0-temp.yaml new file mode 100644 index 0000000000..733cba7801 --- /dev/null +++ b/dts/Bindings/hwmon/starfive,jh71x0-temp.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/starfive,jh71x0-temp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH71x0 Temperature Sensor + +maintainers: + - Emil Renner Berthing <kernel@esmil.dk> + +description: | + StarFive Technology Co. JH71x0 embedded temperature sensor + +properties: + compatible: + enum: + - starfive,jh7100-temp + - starfive,jh7110-temp + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: sense + - const: bus + + '#thermal-sensor-cells': + const: 0 + + resets: + minItems: 2 + maxItems: 2 + + reset-names: + items: + - const: sense + - const: bus + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/starfive-jh7100.h> + #include <dt-bindings/reset/starfive-jh7100.h> + + temperature-sensor@124a0000 { + compatible = "starfive,jh7100-temp"; + reg = <0x124a0000 0x10000>; + clocks = <&clkgen JH7100_CLK_TEMP_SENSE>, + <&clkgen JH7100_CLK_TEMP_APB>; + clock-names = "sense", "bus"; + #thermal-sensor-cells = <0>; + resets = <&rstgen JH7100_RSTN_TEMP_SENSE>, + <&rstgen JH7100_RSTN_TEMP_APB>; + reset-names = "sense", "bus"; + }; diff --git a/dts/Bindings/hwmon/ti,ina2xx.yaml b/dts/Bindings/hwmon/ti,ina2xx.yaml index 47af97bb4c..df86c2c920 100644 --- a/dts/Bindings/hwmon/ti,ina2xx.yaml +++ b/dts/Bindings/hwmon/ti,ina2xx.yaml @@ -26,11 +26,16 @@ properties: - ti,ina226 - ti,ina230 - ti,ina231 + - ti,ina237 - ti,ina238 + - ti,ina260 reg: maxItems: 1 + "#io-channel-cells": + const: 1 + shunt-resistor: description: Shunt resistor value in micro-Ohm. @@ -57,11 +62,18 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 4, 8] + vs-supply: + description: phandle to the regulator that provides the VS supply typically + in range from 2.7 V to 5.5 V. + required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false examples: - | @@ -72,6 +84,9 @@ examples: power-sensor@44 { compatible = "ti,ina220"; reg = <0x44>; + #io-channel-cells = <1>; + label = "vdd_3v0"; shunt-resistor = <1000>; + vs-supply = <&vdd_3v0>; }; }; diff --git a/dts/Bindings/hwmon/ti,ina3221.yaml b/dts/Bindings/hwmon/ti,ina3221.yaml new file mode 100644 index 0000000000..5f10f1207d --- /dev/null +++ b/dts/Bindings/hwmon/ti,ina3221.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ti,ina3221.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments INA3221 Current and Voltage Monitor + +maintainers: + - Jean Delvare <jdelvare@suse.com> + - Guenter Roeck <linux@roeck-us.net> + +properties: + compatible: + const: ti,ina3221 + + reg: + maxItems: 1 + + ti,single-shot: + description: | + This chip has two power modes: single-shot (chip takes one measurement + and then shuts itself down) and continuous (chip takes continuous + measurements). The continuous mode is more reliable and suitable for + hardware monitor type device, but the single-shot mode is more power- + friendly and useful for battery-powered device which cares power + consumptions while still needs some measurements occasionally. + + If this property is present, the single-shot mode will be used, instead + of the default continuous one for monitoring. + $ref: /schemas/types.yaml#/definitions/flag + + "#address-cells": + description: Required only if a child node is present. + const: 1 + + "#size-cells": + description: Required only if a child node is present. + const: 0 + +patternProperties: + "^input@[0-2]$": + description: The node contains optional child nodes for three channels. + Each child node describes the information of input source. Input channels + default to enabled in the chip. Unless channels are explicitly disabled + in device-tree, input channels will be enabled. + type: object + additionalProperties: false + properties: + reg: + description: Must be 0, 1 and 2, corresponding to the IN1, IN2 or IN3 + ports of the INA3221, respectively. + enum: [ 0, 1, 2 ] + + label: + description: name of the input source + + shunt-resistor-micro-ohms: + description: shunt resistor value in micro-Ohm + + ti,summation-disable: + description: | + The INA3221 has a critical alert pin that can be controlled by the + summation control function. This function adds the single + shunt-voltage conversions for the desired channels in order to + compare the combined sum to the programmed limit. The Shunt-Voltage + Sum Limit register contains the programmed value that is compared + to the value in the Shunt-Voltage Sum register in order to + determine if the total summed limit is exceeded. If the + shunt-voltage sum limit value is exceeded, the critical alert pin + is asserted. + + For the summation limit to have a meaningful value, it is necessary + to use the same shunt-resistor value on all enabled channels. If + this is not the case or if a channel should not be used for + triggering the critical alert pin, then this property can be used + exclude specific channels from the summation control function. + type: boolean + + required: + - reg + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + power-sensor@40 { + compatible = "ti,ina3221"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + /* + * Input channels are enabled by default in the device and so + * to disable, must be explicitly disabled in device-tree. + */ + status = "disabled"; + }; + + input@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <5000>; + }; + + input@2 { + reg = <0x2>; + label = "VDD_5V"; + shunt-resistor-micro-ohms = <5000>; + }; + }; + }; diff --git a/dts/Bindings/hwmon/ti,tmp102.yaml b/dts/Bindings/hwmon/ti,tmp102.yaml index c5a889e3e2..7e5b62a021 100644 --- a/dts/Bindings/hwmon/ti,tmp102.yaml +++ b/dts/Bindings/hwmon/ti,tmp102.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/ti,tmp102.yaml# diff --git a/dts/Bindings/hwmon/ti,tmp108.yaml b/dts/Bindings/hwmon/ti,tmp108.yaml index dcbc6fbc3b..8b5307c875 100644 --- a/dts/Bindings/hwmon/ti,tmp108.yaml +++ b/dts/Bindings/hwmon/ti,tmp108.yaml @@ -1,4 +1,4 @@ -# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/hwmon/ti,tmp108.yaml# diff --git a/dts/Bindings/hwmon/ti,tmp464.yaml b/dts/Bindings/hwmon/ti,tmp464.yaml index e7493e25a7..f9c00cbb28 100644 --- a/dts/Bindings/hwmon/ti,tmp464.yaml +++ b/dts/Bindings/hwmon/ti,tmp464.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: TMP464 and TMP468 temperature sensors maintainers: - - Agathe Porte <agathe.porte@nokia.com> + - Guenter Roeck <linux@roeck-us.net> description: | ±0.0625°C Remote and Local temperature sensor diff --git a/dts/Bindings/hwmon/ti,tmp513.yaml b/dts/Bindings/hwmon/ti,tmp513.yaml index 1502b22c77..227858e760 100644 --- a/dts/Bindings/hwmon/ti,tmp513.yaml +++ b/dts/Bindings/hwmon/ti,tmp513.yaml @@ -33,7 +33,7 @@ properties: shunt-resistor-micro-ohms: description: | - If 0, the calibration process will be skiped and the current and power + If 0, the calibration process will be skipped and the current and power measurement engine will not work. Temperature and voltage measurement will continue to work. The shunt value also need to respect: rshunt <= pga-gain * 40 * 1000 * 1000. @@ -72,20 +72,23 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false examples: - | i2c { - #address-cells = <1>; - #size-cells = <0>; - - tmp513@5c { - compatible = "ti,tmp513"; - reg = <0x5C>; - shunt-resistor-micro-ohms = <330000>; - ti,bus-range-microvolt = <32000000>; - ti,pga-gain = <8>; - ti,nfactor = <0x1 0xF3 0x00>; - }; + #address-cells = <1>; + #size-cells = <0>; + + tmp513@5c { + compatible = "ti,tmp513"; + reg = <0x5c>; + shunt-resistor-micro-ohms = <330000>; + ti,bus-range-microvolt = <32000000>; + ti,pga-gain = <8>; + ti,nfactor = <0x1 0xf3 0x00>; + }; }; diff --git a/dts/Bindings/hwmon/ti,tps23861.yaml b/dts/Bindings/hwmon/ti,tps23861.yaml index 3bc8e73dfb..f58248c29e 100644 --- a/dts/Bindings/hwmon/ti,tps23861.yaml +++ b/dts/Bindings/hwmon/ti,tps23861.yaml @@ -26,7 +26,7 @@ properties: maxItems: 1 shunt-resistor-micro-ohms: - description: The value of curent sense resistor in microohms. + description: The value of current sense resistor in microohms. default: 255000 minimum: 250000 maximum: 255000 @@ -35,17 +35,20 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: hwmon-common.yaml# + +unevaluatedProperties: false examples: - | i2c { - #address-cells = <1>; - #size-cells = <0>; - - tps23861@30 { - compatible = "ti,tps23861"; - reg = <0x30>; - shunt-resistor-micro-ohms = <255000>; - }; + #address-cells = <1>; + #size-cells = <0>; + + tps23861@30 { + compatible = "ti,tps23861"; + reg = <0x30>; + shunt-resistor-micro-ohms = <255000>; + }; }; |