diff options
Diffstat (limited to 'dts/Bindings/hwmon')
| -rw-r--r-- | dts/Bindings/hwmon/adi,adm1275.yaml | 68 | ||||
| -rw-r--r-- | dts/Bindings/hwmon/national,lm90.yaml | 4 | ||||
| -rw-r--r-- | dts/Bindings/hwmon/ti,tmp464.yaml | 114 |
3 files changed, 183 insertions, 3 deletions
diff --git a/dts/Bindings/hwmon/adi,adm1275.yaml b/dts/Bindings/hwmon/adi,adm1275.yaml index 223393d7ca..ab87f51c5a 100644 --- a/dts/Bindings/hwmon/adi,adm1275.yaml +++ b/dts/Bindings/hwmon/adi,adm1275.yaml @@ -37,6 +37,72 @@ properties: description: Shunt resistor value in micro-Ohm. + adi,volt-curr-sample-average: + description: | + Number of samples to be used to report voltage and current values. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 16, 32, 64, 128] + + adi,power-sample-average: + description: | + Number of samples to be used to report power values. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8, 16, 32, 64, 128] + +allOf: + - if: + properties: + compatible: + contains: + enum: + - adi,adm1075 + - adi,adm1276 + then: + properties: + adi,volt-curr-sample-average: + default: 128 + adi,power-sample-average: false + + - if: + properties: + compatible: + contains: + enum: + - adi,adm1275 + then: + properties: + adi,volt-curr-sample-average: + default: 16 + adi,power-sample-average: false + + - if: + properties: + compatible: + contains: + enum: + - adi,adm1272 + then: + properties: + adi,volt-curr-sample-average: + default: 128 + adi,power-sample-average: + default: 128 + + - if: + properties: + compatible: + contains: + enum: + - adi,adm1278 + - adi,adm1293 + - adi,adm1294 + then: + properties: + adi,volt-curr-sample-average: + default: 128 + adi,power-sample-average: + default: 1 + required: - compatible - reg @@ -53,5 +119,7 @@ examples: compatible = "adi,adm1272"; reg = <0x10>; shunt-resistor-micro-ohms = <500>; + adi,volt-curr-sample-average = <128>; + adi,power-sample-average = <128>; }; }; diff --git a/dts/Bindings/hwmon/national,lm90.yaml b/dts/Bindings/hwmon/national,lm90.yaml index 6e1d54ff5d..30db929779 100644 --- a/dts/Bindings/hwmon/national,lm90.yaml +++ b/dts/Bindings/hwmon/national,lm90.yaml @@ -60,7 +60,6 @@ additionalProperties: false examples: - | - #include <dt-bindings/gpio/tegra-gpio.h> #include <dt-bindings/interrupt-controller/irq.h> i2c { @@ -71,8 +70,7 @@ examples: compatible = "onnn,nct1008"; reg = <0x4c>; vcc-supply = <&palmas_ldo6_reg>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; #thermal-sensor-cells = <1>; }; }; diff --git a/dts/Bindings/hwmon/ti,tmp464.yaml b/dts/Bindings/hwmon/ti,tmp464.yaml new file mode 100644 index 0000000000..801ca9ba7d --- /dev/null +++ b/dts/Bindings/hwmon/ti,tmp464.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ti,tmp464.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TMP464 and TMP468 temperature sensors + +maintainers: + - Agathe Porte <agathe.porte@nokia.com> + +description: | + ±0.0625°C Remote and Local temperature sensor + https://www.ti.com/lit/ds/symlink/tmp464.pdf + https://www.ti.com/lit/ds/symlink/tmp468.pdf + +properties: + compatible: + enum: + - ti,tmp464 + - ti,tmp468 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "^channel@([0-8])$": + type: object + description: | + Represents channels of the device and their specific configuration. + + properties: + reg: + description: | + The channel number. 0 is local channel, 1-8 are remote channels. + items: + minimum: 0 + maximum: 8 + + label: + description: | + A descriptive name for this channel, like "ambient" or "psu". + + ti,n-factor: + description: | + The value (two's complement) to be programmed in the channel specific N correction register. + For remote channels only. + $ref: /schemas/types.yaml#/definitions/int32 + items: + minimum: -128 + maximum: 127 + + required: + - reg + + additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4b { + compatible = "ti,tmp464"; + reg = <0x4b>; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4b { + compatible = "ti,tmp464"; + reg = <0x4b>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + label = "local"; + }; + + channel@1 { + reg = <0x1>; + ti,n-factor = <(-10)>; + label = "external"; + }; + + channel@2 { + reg = <0x2>; + ti,n-factor = <0x10>; + label = "somelabel"; + }; + + channel@3 { + reg = <0x3>; + status = "disabled"; + }; + }; + }; |