diff options
Diffstat (limited to 'dts/Bindings/i2c/i2c-designware.txt')
| -rw-r--r-- | dts/Bindings/i2c/i2c-designware.txt | 7 |
1 files changed, 6 insertions, 1 deletions
diff --git a/dts/Bindings/i2c/i2c-designware.txt b/dts/Bindings/i2c/i2c-designware.txt index fbb0a6d8b9..3e4bcc2fb6 100644 --- a/dts/Bindings/i2c/i2c-designware.txt +++ b/dts/Bindings/i2c/i2c-designware.txt @@ -3,6 +3,7 @@ Required properties : - compatible : should be "snps,designware-i2c" + or "mscc,ocelot-i2c" with "snps,designware-i2c" for fallback - reg : Offset and length of the register set for the device - interrupts : <IRQ> where IRQ is the interrupt number. @@ -11,8 +12,12 @@ Recommended properties : - clock-frequency : desired I2C bus clock frequency in Hz. Optional properties : + - reg : for "mscc,ocelot-i2c", a second register set to configure the SDA hold + time, named ICPU_CFG:TWI_DELAY in the datasheet. + - i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds. - This option is only supported in hardware blocks version 1.11a or newer. + This option is only supported in hardware blocks version 1.11a or newer and + on Microsemi SoCs ("mscc,ocelot-i2c" compatible). - i2c-scl-falling-time-ns : should contain the SCL falling time in nanoseconds. This value which is by default 300ns is used to compute the tLOW period. |