1 files changed, 0 insertions, 46 deletions
diff --git a/dts/Bindings/i2c/i2c-gpio.txt b/dts/Bindings/i2c/i2c-gpio.txt
deleted file mode 100644
index 38a05562d1..0000000000
--- a/dts/Bindings/i2c/i2c-gpio.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Device-Tree bindings for i2c gpio driver
-
-Required properties:
-	- compatible = "i2c-gpio";
-	- sda-gpios: gpio used for the sda signal, this should be flagged as
-	  active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
-	  from <dt-bindings/gpio/gpio.h> since the signal is by definition
-	  open drain.
-	- scl-gpios: gpio used for the scl signal, this should be flagged as
-	  active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
-	  from <dt-bindings/gpio/gpio.h> since the signal is by definition
-	  open drain.
-
-Optional properties:
-	- i2c-gpio,scl-output-only: scl as output only
-	- i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform)
-	- i2c-gpio,timeout-ms: timeout to get data
-
-Deprecated properties, do not use in new device tree sources:
-	- gpios: sda and scl gpio, alternative for {sda,scl}-gpios
-	- i2c-gpio,sda-open-drain: this means that something outside of our
-	  control has put the GPIO line used for SDA into open drain mode, and
-	  that something is not the GPIO chip. It is essentially an
-	  inconsistency flag.
-	- i2c-gpio,scl-open-drain: this means that something outside of our
-	  control has put the GPIO line used for SCL into open drain mode, and
-	  that something is not the GPIO chip. It is essentially an
-	  inconsistency flag.
-
-Example nodes:
-
-#include <dt-bindings/gpio/gpio.h>
-
-i2c@0 {
-	compatible = "i2c-gpio";
-	sda-gpios = <&pioA 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-	scl-gpios = <&pioA 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-	i2c-gpio,delay-us = <2>;	/* ~100 kHz */
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	rv3029c2@56 {
-		compatible = "rv3029c2";
-		reg = <0x56>;
-	};
-};