1 files changed, 73 insertions, 0 deletions
diff --git a/dts/Bindings/i2c/i2c-gpio.yaml b/dts/Bindings/i2c/i2c-gpio.yaml
new file mode 100644
index 0000000000..da6129090a
--- /dev/null
+++ b/dts/Bindings/i2c/i2c-gpio.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for GPIO bitbanged I2C
+
+maintainers:
+  - Wolfram Sang <wolfram@the-dreams.de>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: i2c-gpio
+
+  sda-gpios:
+    description:
+      gpio used for the sda signal, this should be flagged as
+      active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
+      from <dt-bindings/gpio/gpio.h> since the signal is by definition
+      open drain.
+    maxItems: 1
+
+  scl-gpios:
+    description:
+      gpio used for the scl signal, this should be flagged as
+      active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
+      from <dt-bindings/gpio/gpio.h> since the signal is by definition
+      open drain.
+    maxItems: 1
+
+  i2c-gpio,scl-output-only:
+    description: scl as output only
+    type: boolean
+
+  i2c-gpio,delay-us:
+    description: delay between GPIO operations (may depend on each platform)
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  i2c-gpio,timeout-ms:
+    description: timeout to get data
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  # Deprecated properties, do not use in new device tree sources:
+  gpios:
+    minItems: 2
+    maxItems: 2
+    description: sda and scl gpio, alternative for {sda,scl}-gpios
+
+  i2c-gpio,sda-open-drain:
+    # Generate a warning if present
+    not: true
+    description: this means that something outside of our control has put
+      the GPIO line used for SDA into open drain mode, and that something is
+      not the GPIO chip. It is essentially an inconsistency flag.
+
+  i2c-gpio,scl-open-drain:
+    # Generate a warning if present
+    not: true
+    description: this means that something outside of our control has put the
+      GPIO line used for SCL into open drain mode, and that something is not
+      the GPIO chip. It is essentially an inconsistency flag.
+
+required:
+  - compatible
+  - sda-gpios
+  - scl-gpios
+
+...