1 files changed, 0 insertions, 73 deletions
diff --git a/dts/Bindings/i2c/i2c-mux.txt b/dts/Bindings/i2c/i2c-mux.txt
deleted file mode 100644
index b38f58a1c8..0000000000
--- a/dts/Bindings/i2c/i2c-mux.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-Common i2c bus multiplexer/switch properties.
-
-An i2c bus multiplexer/switch will have several child busses that are
-numbered uniquely in a device dependent manner.  The nodes for an i2c bus
-multiplexer/switch will have one child node for each child bus.
-
-Optional properties:
-- #address-cells = <1>;
-   This property is required if the i2c-mux child node does not exist.
-
-- #size-cells = <0>;
-   This property is required if the i2c-mux child node does not exist.
-
-- i2c-mux
-   For i2c multiplexers/switches that have child nodes that are a mixture
-   of both i2c child busses and other child nodes, the 'i2c-mux' subnode
-   can be used for populating the i2c child busses.  If an 'i2c-mux'
-   subnode is present, only subnodes of this will be considered as i2c
-   child busses.
-
-Required properties for the i2c-mux child node:
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Required properties for i2c child bus nodes:
-- #address-cells = <1>;
-- #size-cells = <0>;
-- reg : The sub-bus number.
-
-Optional properties for i2c child bus nodes:
-- Other properties specific to the multiplexer/switch hardware.
-- Child nodes conforming to i2c bus binding
-
-
-Example :
-
-	/*
-	   An NXP pca9548 8 channel I2C multiplexer at address 0x70
-	   with two NXP pca8574 GPIO expanders attached, one each to
-	   ports 3 and 4.
-	 */
-
-	mux@70 {
-		compatible = "nxp,pca9548";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			gpio1: gpio@38 {
-				compatible = "nxp,pca8574";
-				reg = <0x38>;
-				#gpio-cells = <2>;
-				gpio-controller;
-			};
-		};
-		i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			gpio2: gpio@38 {
-				compatible = "nxp,pca8574";
-				reg = <0x38>;
-				#gpio-cells = <2>;
-				gpio-controller;
-			};
-		};
-	};