1 files changed, 0 insertions, 64 deletions
diff --git a/dts/Bindings/i2c/i2c-mv64xxx.txt b/dts/Bindings/i2c/i2c-mv64xxx.txt
deleted file mode 100644
index 0ffe65a316..0000000000
--- a/dts/Bindings/i2c/i2c-mv64xxx.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-
-* Marvell MV64XXX I2C controller
-
-Required properties :
-
- - reg             : Offset and length of the register set for the device
- - compatible      : Should be either:
-                     - "allwinner,sun4i-a10-i2c"
-                     - "allwinner,sun6i-a31-i2c"
-                     - "marvell,mv64xxx-i2c"
-                     - "marvell,mv78230-i2c"
-                     - "marvell,mv78230-a0-i2c"
-                       * Note: Only use "marvell,mv78230-a0-i2c" for a
-                         very rare, initial version of the SoC which
-                         had broken offload support.  Linux
-                         auto-detects this and sets it appropriately.
- - interrupts      : The interrupt number
-
-Optional properties :
-
- - clock-frequency : Desired I2C bus clock frequency in Hz. If not set the
-default frequency is 100kHz
-
- - resets          : phandle to the parent reset controller. Mandatory
-                     whenever you're using the "allwinner,sun6i-a31-i2c"
-                     compatible.
-
- - clocks:	   : pointers to the reference clocks for this device, the
-		     first one is the one used for the clock on the i2c bus,
-		     the second one is the clock used to acces the registers
-		     of the controller
-
- - clock-names	   : names of used clocks, mandatory if the second clock is
-		     used, the name must be "core", and "reg" (the latter is
-		     only for Armada 7K/8K).
-
-Examples:
-
-	i2c@11000 {
-		compatible = "marvell,mv64xxx-i2c";
-		reg = <0x11000 0x20>;
-		interrupts = <29>;
-		clock-frequency = <100000>;
-	};
-
-For the Armada XP:
-
-	i2c@11000 {
-		compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-		reg = <0x11000 0x100>;
-		interrupts = <29>;
-		clock-frequency = <100000>;
-	};
-
-For the Armada 7040:
-
-	i2c@701000 {
-		compatible = "marvell,mv78230-i2c";
-		reg = <0x701000 0x20>;
-		interrupts = <29>;
-		clock-frequency = <100000>;
-		clock-names = "core", "reg";
-		clocks = <&core_clock>, <&reg_clock>;
-	};