summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/i2c/i2c-rk3x.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/i2c/i2c-rk3x.txt')
-rw-r--r--dts/Bindings/i2c/i2c-rk3x.txt68
1 files changed, 0 insertions, 68 deletions
diff --git a/dts/Bindings/i2c/i2c-rk3x.txt b/dts/Bindings/i2c/i2c-rk3x.txt
deleted file mode 100644
index 22f2eeb2c4..0000000000
--- a/dts/Bindings/i2c/i2c-rk3x.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-* Rockchip RK3xxx I2C controller
-
-This driver interfaces with the native I2C controller present in Rockchip
-RK3xxx SoCs.
-
-Required properties :
-
- - reg : Offset and length of the register set for the device
- - compatible: should be one of the following:
- - "rockchip,rv1108-i2c": for rv1108
- - "rockchip,rk3066-i2c": for rk3066
- - "rockchip,rk3188-i2c": for rk3188
- - "rockchip,rk3228-i2c": for rk3228
- - "rockchip,rk3288-i2c": for rk3288
- - "rockchip,rk3328-i2c", "rockchip,rk3399-i2c": for rk3328
- - "rockchip,rk3399-i2c": for rk3399
- - interrupts : interrupt number
- - clocks: See ../clock/clock-bindings.txt
- - For older hardware (rk3066, rk3188, rk3228, rk3288):
- - There is one clock that's used both to derive the functional clock
- for the device and as the bus clock.
- - For newer hardware (rk3399): specified by name
- - "i2c": This is used to derive the functional clock.
- - "pclk": This is the bus clock.
-
-Required on RK3066, RK3188 :
-
- - rockchip,grf : the phandle of the syscon node for the general register
- file (GRF)
- - on those SoCs an alias with the correct I2C bus ID (bit offset in the GRF)
- is also required.
-
-Optional properties :
-
- - clock-frequency : SCL frequency to use (in Hz). If omitted, 100kHz is used.
- - i2c-scl-rising-time-ns : Number of nanoseconds the SCL signal takes to rise
- (t(r) in I2C specification). If not specified this is assumed to be
- the maximum the specification allows(1000 ns for Standard-mode,
- 300 ns for Fast-mode) which might cause slightly slower communication.
- - i2c-scl-falling-time-ns : Number of nanoseconds the SCL signal takes to fall
- (t(f) in the I2C specification). If not specified this is assumed to
- be the maximum the specification allows (300 ns) which might cause
- slightly slower communication.
- - i2c-sda-falling-time-ns : Number of nanoseconds the SDA signal takes to fall
- (t(f) in the I2C specification). If not specified we'll use the SCL
- value since they are the same in nearly all cases.
-
-Example:
-
-aliases {
- i2c0 = &i2c0;
-}
-
-i2c0: i2c@2002d000 {
- compatible = "rockchip,rk3188-i2c";
- reg = <0x2002d000 0x1000>;
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- rockchip,grf = <&grf>;
-
- clock-names = "i2c";
- clocks = <&cru PCLK_I2C0>;
-
- i2c-scl-rising-time-ns = <800>;
- i2c-scl-falling-time-ns = <100>;
-};