diff options
Diffstat (limited to 'dts/Bindings/i2c')
| -rw-r--r-- | dts/Bindings/i2c/i2c-at91.txt | 30 | ||||
| -rw-r--r-- | dts/Bindings/i2c/i2c-brcmstb.txt | 28 | ||||
| -rw-r--r-- | dts/Bindings/i2c/i2c-mt6577.txt | 41 | ||||
| -rw-r--r-- | dts/Bindings/i2c/i2c-xgene-slimpro.txt | 15 | ||||
| -rw-r--r-- | dts/Bindings/i2c/trivial-devices.txt | 3 |
5 files changed, 113 insertions, 4 deletions
diff --git a/dts/Bindings/i2c/i2c-at91.txt b/dts/Bindings/i2c/i2c-at91.txt index 388f0a275f..6e81dc153f 100644 --- a/dts/Bindings/i2c/i2c-at91.txt +++ b/dts/Bindings/i2c/i2c-at91.txt @@ -2,8 +2,8 @@ I2C for Atmel platforms Required properties : - compatible : Must be "atmel,at91rm9200-i2c", "atmel,at91sam9261-i2c", - "atmel,at91sam9260-i2c", "atmel,at91sam9g20-i2c", "atmel,at91sam9g10-i2c" - or "atmel,at91sam9x5-i2c" + "atmel,at91sam9260-i2c", "atmel,at91sam9g20-i2c", "atmel,at91sam9g10-i2c", + "atmel,at91sam9x5-i2c" or "atmel,sama5d2-i2c" - reg: physical base address of the controller and length of memory mapped region. - interrupts: interrupt number to the cpu. @@ -13,6 +13,10 @@ Required properties : Optional properties: - clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000 +- dmas: A list of two dma specifiers, one for each entry in dma-names. +- dma-names: should contain "tx" and "rx". +- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO + capable I2C controllers. - Child nodes conforming to i2c bus binding Examples : @@ -32,3 +36,25 @@ i2c0: i2c@fff84000 { pagesize = <128>; } } + +i2c0: i2c@f8034600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0xf8034600 0x100>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(11)>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(12)>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&flx0>; + atmel,fifo-size = <16>; + + wm8731: wm8731@1a { + compatible = "wm8731"; + reg = <0x1a>; + }; +}; diff --git a/dts/Bindings/i2c/i2c-brcmstb.txt b/dts/Bindings/i2c/i2c-brcmstb.txt new file mode 100644 index 0000000000..d6f724efdc --- /dev/null +++ b/dts/Bindings/i2c/i2c-brcmstb.txt @@ -0,0 +1,28 @@ +Broadcom stb bsc iic master controller + +Required properties: + +- compatible: should be "brcm,brcmstb-i2c" +- clock-frequency: 32-bit decimal value of iic master clock freqency in Hz + valid values are 375000, 390000, 187500, 200000 + 93750, 97500, 46875 and 50000 +- reg: specifies the base physical address and size of the registers + +Optional properties : + +- interrupt-parent: specifies the phandle to the parent interrupt controller + this one is cascaded from +- interrupts: specifies the interrupt number, the irq line to be used +- interrupt-names: Interrupt name string + +Example: + +bsca: i2c@f0406200 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&irq0_intc>; + reg = <0xf0406200 0x58>; + interrupts = <0x18>; + interrupt-names = "upg_bsca"; +}; + diff --git a/dts/Bindings/i2c/i2c-mt6577.txt b/dts/Bindings/i2c/i2c-mt6577.txt new file mode 100644 index 0000000000..0ce6fa3242 --- /dev/null +++ b/dts/Bindings/i2c/i2c-mt6577.txt @@ -0,0 +1,41 @@ +* Mediatek's I2C controller + +The Mediatek's I2C controller is used to interface with I2C devices. + +Required properties: + - compatible: value should be either of the following. + (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c. + (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c. + (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c. + (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c. + (e) "mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c. + - reg: physical base address of the controller and dma base, length of memory + mapped region. + - interrupts: interrupt number to the cpu. + - clock-div: the fixed value for frequency divider of clock source in i2c + module. Each IC may be different. + - clocks: clock name from clock manager + - clock-names: Must include "main" and "dma", if enable have-pmic need include + "pmic" extra. + +Optional properties: + - clock-frequency: Frequency in Hz of the bus when transfer, the default value + is 100000. + - mediatek,have-pmic: platform can control i2c form special pmic side. + Only mt6589 and mt8135 support this feature. + - mediatek,use-push-pull: IO config use push-pull mode. + +Example: + + i2c0: i2c@1100d000 { + compatible = "mediatek,mt6577-i2c"; + reg = <0x1100d000 0x70>, + <0x11000300 0x80>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>; + clock-frequency = <400000>; + mediatek,have-pmic; + clock-div = <16>; + clocks = <&i2c0_ck>, <&ap_dma_ck>; + clock-names = "main", "dma"; + }; + diff --git a/dts/Bindings/i2c/i2c-xgene-slimpro.txt b/dts/Bindings/i2c/i2c-xgene-slimpro.txt new file mode 100644 index 0000000000..f6b2c20cfb --- /dev/null +++ b/dts/Bindings/i2c/i2c-xgene-slimpro.txt @@ -0,0 +1,15 @@ +APM X-Gene SLIMpro Mailbox I2C Driver + +An I2C controller accessed over the "SLIMpro" mailbox. + +Required properties : + + - compatible : should be "apm,xgene-slimpro-i2c" + - mboxes : use the label reference for the mailbox as the first parameter. + The second parameter is the channel number. + +Example : + i2cslimpro { + compatible = "apm,xgene-slimpro-i2c"; + mboxes = <&mailbox 0>; + }; diff --git a/dts/Bindings/i2c/trivial-devices.txt b/dts/Bindings/i2c/trivial-devices.txt index ad0c4ac916..00f8652e19 100644 --- a/dts/Bindings/i2c/trivial-devices.txt +++ b/dts/Bindings/i2c/trivial-devices.txt @@ -19,8 +19,7 @@ adi,adt7475 +/-1C TDM Extended Temp Range I.C adi,adt7476 +/-1C TDM Extended Temp Range I.C adi,adt7490 +/-1C TDM Extended Temp Range I.C adi,adxl345 Three-Axis Digital Accelerometer -adi,adxl346 Three-Axis Digital Accelerometer -adi,adxl34x Three-Axis Digital Accelerometer +adi,adxl346 Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too) at,24c08 i2c serial eeprom (24cxx) atmel,24c00 i2c serial eeprom (24cxx) atmel,24c01 i2c serial eeprom (24cxx) |