summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/i2c')
-rw-r--r--dts/Bindings/i2c/i2c-at91.txt2
-rw-r--r--dts/Bindings/i2c/i2c-gpio.txt46
-rw-r--r--dts/Bindings/i2c/i2c-gpio.yaml73
-rw-r--r--dts/Bindings/i2c/i2c-mux-ltc4306.txt4
-rw-r--r--dts/Bindings/i2c/i2c-mux-pca954x.txt2
-rw-r--r--dts/Bindings/i2c/i2c-owl.txt4
-rw-r--r--dts/Bindings/i2c/i2c-rcar.txt1
-rw-r--r--dts/Bindings/i2c/i2c-sh_mobile.txt10
-rw-r--r--dts/Bindings/i2c/i2c-stm32.txt6
-rw-r--r--dts/Bindings/i2c/ibm,p8-occ-hwmon.txt25
-rw-r--r--dts/Bindings/i2c/nxp,pca9541.txt2
11 files changed, 122 insertions, 53 deletions
diff --git a/dts/Bindings/i2c/i2c-at91.txt b/dts/Bindings/i2c/i2c-at91.txt
index ef973a0343..b7cec17c3d 100644
--- a/dts/Bindings/i2c/i2c-at91.txt
+++ b/dts/Bindings/i2c/i2c-at91.txt
@@ -33,7 +33,7 @@ i2c0: i2c@fff84000 {
clock-frequency = <400000>;
24c512@50 {
- compatible = "24c512";
+ compatible = "atmel,24c512";
reg = <0x50>;
pagesize = <128>;
}
diff --git a/dts/Bindings/i2c/i2c-gpio.txt b/dts/Bindings/i2c/i2c-gpio.txt
deleted file mode 100644
index 38a05562d1..0000000000
--- a/dts/Bindings/i2c/i2c-gpio.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Device-Tree bindings for i2c gpio driver
-
-Required properties:
- - compatible = "i2c-gpio";
- - sda-gpios: gpio used for the sda signal, this should be flagged as
- active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
- from <dt-bindings/gpio/gpio.h> since the signal is by definition
- open drain.
- - scl-gpios: gpio used for the scl signal, this should be flagged as
- active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
- from <dt-bindings/gpio/gpio.h> since the signal is by definition
- open drain.
-
-Optional properties:
- - i2c-gpio,scl-output-only: scl as output only
- - i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform)
- - i2c-gpio,timeout-ms: timeout to get data
-
-Deprecated properties, do not use in new device tree sources:
- - gpios: sda and scl gpio, alternative for {sda,scl}-gpios
- - i2c-gpio,sda-open-drain: this means that something outside of our
- control has put the GPIO line used for SDA into open drain mode, and
- that something is not the GPIO chip. It is essentially an
- inconsistency flag.
- - i2c-gpio,scl-open-drain: this means that something outside of our
- control has put the GPIO line used for SCL into open drain mode, and
- that something is not the GPIO chip. It is essentially an
- inconsistency flag.
-
-Example nodes:
-
-#include <dt-bindings/gpio/gpio.h>
-
-i2c@0 {
- compatible = "i2c-gpio";
- sda-gpios = <&pioA 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- scl-gpios = <&pioA 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- i2c-gpio,delay-us = <2>; /* ~100 kHz */
- #address-cells = <1>;
- #size-cells = <0>;
-
- rv3029c2@56 {
- compatible = "rv3029c2";
- reg = <0x56>;
- };
-};
diff --git a/dts/Bindings/i2c/i2c-gpio.yaml b/dts/Bindings/i2c/i2c-gpio.yaml
new file mode 100644
index 0000000000..da6129090a
--- /dev/null
+++ b/dts/Bindings/i2c/i2c-gpio.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for GPIO bitbanged I2C
+
+maintainers:
+ - Wolfram Sang <wolfram@the-dreams.de>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: i2c-gpio
+
+ sda-gpios:
+ description:
+ gpio used for the sda signal, this should be flagged as
+ active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
+ from <dt-bindings/gpio/gpio.h> since the signal is by definition
+ open drain.
+ maxItems: 1
+
+ scl-gpios:
+ description:
+ gpio used for the scl signal, this should be flagged as
+ active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
+ from <dt-bindings/gpio/gpio.h> since the signal is by definition
+ open drain.
+ maxItems: 1
+
+ i2c-gpio,scl-output-only:
+ description: scl as output only
+ type: boolean
+
+ i2c-gpio,delay-us:
+ description: delay between GPIO operations (may depend on each platform)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ i2c-gpio,timeout-ms:
+ description: timeout to get data
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ # Deprecated properties, do not use in new device tree sources:
+ gpios:
+ minItems: 2
+ maxItems: 2
+ description: sda and scl gpio, alternative for {sda,scl}-gpios
+
+ i2c-gpio,sda-open-drain:
+ # Generate a warning if present
+ not: true
+ description: this means that something outside of our control has put
+ the GPIO line used for SDA into open drain mode, and that something is
+ not the GPIO chip. It is essentially an inconsistency flag.
+
+ i2c-gpio,scl-open-drain:
+ # Generate a warning if present
+ not: true
+ description: this means that something outside of our control has put the
+ GPIO line used for SCL into open drain mode, and that something is not
+ the GPIO chip. It is essentially an inconsistency flag.
+
+required:
+ - compatible
+ - sda-gpios
+ - scl-gpios
+
+...
diff --git a/dts/Bindings/i2c/i2c-mux-ltc4306.txt b/dts/Bindings/i2c/i2c-mux-ltc4306.txt
index 1e98c6b3a7..8b1e49cdce 100644
--- a/dts/Bindings/i2c/i2c-mux-ltc4306.txt
+++ b/dts/Bindings/i2c/i2c-mux-ltc4306.txt
@@ -43,7 +43,7 @@ Example:
reg = <0>;
eeprom@50 {
- compatible = "at,24c02";
+ compatible = "atmel,24c02";
reg = <0x50>;
};
};
@@ -54,7 +54,7 @@ Example:
reg = <1>;
eeprom@50 {
- compatible = "at,24c02";
+ compatible = "atmel,24c02";
reg = <0x50>;
};
};
diff --git a/dts/Bindings/i2c/i2c-mux-pca954x.txt b/dts/Bindings/i2c/i2c-mux-pca954x.txt
index ccf6c86ed0..30ac6a60f0 100644
--- a/dts/Bindings/i2c/i2c-mux-pca954x.txt
+++ b/dts/Bindings/i2c/i2c-mux-pca954x.txt
@@ -54,7 +54,7 @@ Example:
reg = <2>;
eeprom@54 {
- compatible = "at,24c08";
+ compatible = "atmel,24c08";
reg = <0x54>;
};
};
diff --git a/dts/Bindings/i2c/i2c-owl.txt b/dts/Bindings/i2c/i2c-owl.txt
index b743fe444e..54c05dbdb2 100644
--- a/dts/Bindings/i2c/i2c-owl.txt
+++ b/dts/Bindings/i2c/i2c-owl.txt
@@ -2,7 +2,9 @@ Actions Semiconductor Owl I2C controller
Required properties:
-- compatible : Should be "actions,s900-i2c".
+- compatible : Should be one of the following:
+ - "actions,s700-i2c" for S700 SoC
+ - "actions,s900-i2c" for S900 SoC
- reg : Offset and length of the register set for the device.
- #address-cells : Should be 1.
- #size-cells : Should be 0.
diff --git a/dts/Bindings/i2c/i2c-rcar.txt b/dts/Bindings/i2c/i2c-rcar.txt
index 30c0485b16..3ee5e8f6ee 100644
--- a/dts/Bindings/i2c/i2c-rcar.txt
+++ b/dts/Bindings/i2c/i2c-rcar.txt
@@ -7,6 +7,7 @@ Required properties:
"renesas,i2c-r8a7745" if the device is a part of a R8A7745 SoC.
"renesas,i2c-r8a77470" if the device is a part of a R8A77470 SoC.
"renesas,i2c-r8a774a1" if the device is a part of a R8A774A1 SoC.
+ "renesas,i2c-r8a774c0" if the device is a part of a R8A774C0 SoC.
"renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC.
"renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC.
"renesas,i2c-r8a7790" if the device is a part of a R8A7790 SoC.
diff --git a/dts/Bindings/i2c/i2c-sh_mobile.txt b/dts/Bindings/i2c/i2c-sh_mobile.txt
index d81b626436..202602e6e8 100644
--- a/dts/Bindings/i2c/i2c-sh_mobile.txt
+++ b/dts/Bindings/i2c/i2c-sh_mobile.txt
@@ -8,6 +8,7 @@ Required properties:
- "renesas,iic-r8a7744" (RZ/G1N)
- "renesas,iic-r8a7745" (RZ/G1E)
- "renesas,iic-r8a774a1" (RZ/G2M)
+ - "renesas,iic-r8a774c0" (RZ/G2E)
- "renesas,iic-r8a7790" (R-Car H2)
- "renesas,iic-r8a7791" (R-Car M2-W)
- "renesas,iic-r8a7792" (R-Car V2H)
@@ -16,6 +17,7 @@ Required properties:
- "renesas,iic-r8a7795" (R-Car H3)
- "renesas,iic-r8a7796" (R-Car M3-W)
- "renesas,iic-r8a77965" (R-Car M3-N)
+ - "renesas,iic-r8a77990" (R-Car E3)
- "renesas,iic-sh73a0" (SH-Mobile AG5)
- "renesas,rcar-gen2-iic" (generic R-Car Gen2 or RZ/G1
compatible device)
@@ -28,7 +30,13 @@ Required properties:
the platform first followed by the generic R-Car
version.
- renesas,rmobile-iic must always follow.
+ When compatible with "renesas,rmobile-iic" it should
+ be the last compatibility string listed.
+
+ The r8a77990 (R-Car E3) and r8a774c0 (RZ/G2E)
+ controllers are not considered compatible with
+ "renesas,rcar-gen3-iic" or "renesas,rmobile-iic"
+ due to the absence of automatic transmission registers.
- reg : address start and address range size of device
- interrupts : interrupt of device
diff --git a/dts/Bindings/i2c/i2c-stm32.txt b/dts/Bindings/i2c/i2c-stm32.txt
index 3b54899666..69240e189b 100644
--- a/dts/Bindings/i2c/i2c-stm32.txt
+++ b/dts/Bindings/i2c/i2c-stm32.txt
@@ -26,6 +26,11 @@ Optional properties :
- i2c-scl-falling-time-ns : Only for STM32F7, I2C SCL Falling time for the board
(default: 10)
I2C Timings are derived from these 2 values
+- st,syscfg-fmp: Only for STM32F7, use to set Fast Mode Plus bit within SYSCFG
+ whether Fast Mode Plus speed is selected by slave.
+ 1st cell : phandle to syscfg
+ 2nd cell : register offset within SYSCFG
+ 3rd cell : register bitmask for FMP bit
Example :
@@ -53,4 +58,5 @@ Example :
clocks = <&rcc 1 CLK_I2C1>;
pinctrl-0 = <&i2c1_sda_pin>, <&i2c1_scl_pin>;
pinctrl-names = "default";
+ st,syscfg-fmp = <&syscfg 0x4 0x1>;
};
diff --git a/dts/Bindings/i2c/ibm,p8-occ-hwmon.txt b/dts/Bindings/i2c/ibm,p8-occ-hwmon.txt
new file mode 100644
index 0000000000..5dc5d2e257
--- /dev/null
+++ b/dts/Bindings/i2c/ibm,p8-occ-hwmon.txt
@@ -0,0 +1,25 @@
+Device-tree bindings for I2C-based On-Chip Controller hwmon device
+------------------------------------------------------------------
+
+Required properties:
+ - compatible = "ibm,p8-occ-hwmon";
+ - reg = <I2C address>; : I2C bus address
+
+Examples:
+
+ i2c-bus@100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ < more properties >
+
+ occ-hwmon@1 {
+ compatible = "ibm,p8-occ-hwmon";
+ reg = <0x50>;
+ };
+
+ occ-hwmon@2 {
+ compatible = "ibm,p8-occ-hwmon";
+ reg = <0x51>;
+ };
+ };
diff --git a/dts/Bindings/i2c/nxp,pca9541.txt b/dts/Bindings/i2c/nxp,pca9541.txt
index 0fbbc6970e..42bfc09c89 100644
--- a/dts/Bindings/i2c/nxp,pca9541.txt
+++ b/dts/Bindings/i2c/nxp,pca9541.txt
@@ -22,7 +22,7 @@ Example:
#size-cells = <0>;
eeprom@54 {
- compatible = "at,24c08";
+ compatible = "atmel,24c08";
reg = <0x54>;
};
};
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-01 05:12:55 +0000