diff options
Diffstat (limited to 'dts/Bindings/iio/adc/at91-sama5d2_adc.txt')
| -rw-r--r-- | dts/Bindings/iio/adc/at91-sama5d2_adc.txt | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/dts/Bindings/iio/adc/at91-sama5d2_adc.txt b/dts/Bindings/iio/adc/at91-sama5d2_adc.txt index 3223684a64..552e7a8395 100644 --- a/dts/Bindings/iio/adc/at91-sama5d2_adc.txt +++ b/dts/Bindings/iio/adc/at91-sama5d2_adc.txt @@ -11,6 +11,11 @@ Required properties: - atmel,min-sample-rate-hz: Minimum sampling rate, it depends on SoC. - atmel,max-sample-rate-hz: Maximum sampling rate, it depends on SoC. - atmel,startup-time-ms: Startup time expressed in ms, it depends on SoC. + - atmel,trigger-edge-type: One of possible edge types for the ADTRG hardware + trigger pin. When the specific edge type is detected, the conversion will + start. Possible values are rising, falling, or both. + This property uses the IRQ edge types values: IRQ_TYPE_EDGE_RISING , + IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH Example: @@ -25,4 +30,5 @@ adc: adc@fc030000 { atmel,startup-time-ms = <4>; vddana-supply = <&vdd_3v3_lp_reg>; vref-supply = <&vdd_3v3_lp_reg>; + atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>; } |