diff options
Diffstat (limited to 'dts/Bindings/iio/gyroscope')
| -rw-r--r-- | dts/Bindings/iio/gyroscope/bosch,bmg160.yaml | 3 | ||||
| -rw-r--r-- | dts/Bindings/iio/gyroscope/invensense,mpu3050.txt | 45 | ||||
| -rw-r--r-- | dts/Bindings/iio/gyroscope/invensense,mpu3050.yaml | 70 |
3 files changed, 73 insertions, 45 deletions
diff --git a/dts/Bindings/iio/gyroscope/bosch,bmg160.yaml b/dts/Bindings/iio/gyroscope/bosch,bmg160.yaml index 0466483be6..b6bbc312a7 100644 --- a/dts/Bindings/iio/gyroscope/bosch,bmg160.yaml +++ b/dts/Bindings/iio/gyroscope/bosch,bmg160.yaml @@ -19,6 +19,9 @@ properties: reg: maxItems: 1 + vdd-supply: true + vddio-supply: true + interrupts: minItems: 1 description: diff --git a/dts/Bindings/iio/gyroscope/invensense,mpu3050.txt b/dts/Bindings/iio/gyroscope/invensense,mpu3050.txt deleted file mode 100644 index 233fe207ad..0000000000 --- a/dts/Bindings/iio/gyroscope/invensense,mpu3050.txt +++ /dev/null @@ -1,45 +0,0 @@ -Invensense MPU-3050 Gyroscope device tree bindings - -Required properties: - - compatible : should be "invensense,mpu3050" - - reg : the I2C address of the sensor - -Optional properties: - - interrupts : interrupt mapping for the trigger interrupt from the - internal oscillator. The following IRQ modes are supported: - IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH and - IRQ_TYPE_LEVEL_LOW. The driver should detect and configure the hardware - for the desired interrupt type. - - vdd-supply : supply regulator for the main power voltage. - - vlogic-supply : supply regulator for the signal voltage. - - mount-matrix : see iio/mount-matrix.txt - -Optional subnodes: - - The MPU-3050 will pass through and forward the I2C signals from the - incoming I2C bus, alternatively drive traffic to a slave device (usually - an accelerometer) on its own initiative. Therefore is supports a subnode - i2c gate node. For details see: i2c/i2c-gate.txt - -Example: - -mpu3050@68 { - compatible = "invensense,mpu3050"; - reg = <0x68>; - interrupt-parent = <&foo>; - interrupts = <12 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&bar>; - vlogic-supply = <&baz>; - - /* External I2C interface */ - i2c-gate { - #address-cells = <1>; - #size-cells = <0>; - - fnord@18 { - compatible = "fnord"; - reg = <0x18>; - interrupt-parent = <&foo>; - interrupts = <13 IRQ_TYPE_EDGE_FALLING>; - }; - }; -}; diff --git a/dts/Bindings/iio/gyroscope/invensense,mpu3050.yaml b/dts/Bindings/iio/gyroscope/invensense,mpu3050.yaml new file mode 100644 index 0000000000..7e2accc3d5 --- /dev/null +++ b/dts/Bindings/iio/gyroscope/invensense,mpu3050.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/gyroscope/invensense,mpu3050.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Invensense MPU-3050 Gyroscope + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +properties: + compatible: + const: invensense,mpu3050 + + reg: + maxItems: 1 + + vdd-supply: true + + vlogic-supply: true + + interrupts: + minItems: 1 + description: + Interrupt mapping for the trigger interrupt from the internal oscillator. + + mount-matrix: true + + i2c-gate: + $ref: /schemas/i2c/i2c-controller.yaml + unevaluatedProperties: false + description: | + The MPU-3050 will pass through and forward the I2C signals from the + incoming I2C bus, alternatively drive traffic to a slave device (usually + an accelerometer) on its own initiative. Therefore is supports an + i2c-gate subnode. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + gyroscope@68 { + compatible = "invensense,mpu3050"; + reg = <0x68>; + interrupt-parent = <&foo>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&bar>; + vlogic-supply = <&baz>; + + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@c { + compatible = "ak,ak8975"; + reg = <0x0c>; + }; + }; + }; + }; +... |