diff options
Diffstat (limited to 'dts/Bindings/iio/imu/st_lsm6dsx.txt')
| -rw-r--r-- | dts/Bindings/iio/imu/st_lsm6dsx.txt | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/dts/Bindings/iio/imu/st_lsm6dsx.txt b/dts/Bindings/iio/imu/st_lsm6dsx.txt index 6f28ff55f3..1ff1af799c 100644 --- a/dts/Bindings/iio/imu/st_lsm6dsx.txt +++ b/dts/Bindings/iio/imu/st_lsm6dsx.txt @@ -11,6 +11,14 @@ Required properties: Optional properties: - st,drdy-int-pin: the pin on the package that will be used to signal "data ready" (valid values: 1 or 2). +- drive-open-drain: the interrupt/data ready line will be configured + as open drain, which is useful if several sensors share the same + interrupt line. This is a boolean property. + (This binding is taken from pinctrl/pinctrl-bindings.txt) + If the requested interrupt is configured as IRQ_TYPE_LEVEL_HIGH or + IRQ_TYPE_EDGE_RISING a pull-down resistor is needed to drive the line + when it is not active, whereas a pull-up one is needed when interrupt + line is configured as IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING. - interrupt-parent: should be the phandle for the interrupt controller - interrupts: interrupt mapping for IRQ. It should be configured with flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or |