diff options
Diffstat (limited to 'dts/Bindings/iio/magnetometer')
| -rw-r--r-- | dts/Bindings/iio/magnetometer/asahi-kasei,ak8975.yaml | 8 | ||||
| -rw-r--r-- | dts/Bindings/iio/magnetometer/bosch,bmc150_magn.yaml | 3 | ||||
| -rw-r--r-- | dts/Bindings/iio/magnetometer/ti,tmag5273.yaml | 75 | ||||
| -rw-r--r-- | dts/Bindings/iio/magnetometer/yamaha,yas530.yaml | 112 |
4 files changed, 198 insertions, 0 deletions
diff --git a/dts/Bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/dts/Bindings/iio/magnetometer/asahi-kasei,ak8975.yaml index a25590a16b..9790f75fc6 100644 --- a/dts/Bindings/iio/magnetometer/asahi-kasei,ak8975.yaml +++ b/dts/Bindings/iio/magnetometer/asahi-kasei,ak8975.yaml @@ -17,11 +17,13 @@ properties: - asahi-kasei,ak8963 - asahi-kasei,ak09911 - asahi-kasei,ak09912 + - asahi-kasei,ak09916 - enum: - ak8975 - ak8963 - ak09911 - ak09912 + - ak09916 deprecated: true reg: @@ -43,10 +45,16 @@ properties: an optional regulator that needs to be on to provide VDD power to the sensor. + vid-supply: + description: | + an optional regulator that needs to be on to provide VID power to + the sensor. + mount-matrix: description: an optional 3x3 mounting rotation matrix. reset-gpios: + maxItems: 1 description: | an optional pin needed for AK09911 to set the reset state. This should be usually active low diff --git a/dts/Bindings/iio/magnetometer/bosch,bmc150_magn.yaml b/dts/Bindings/iio/magnetometer/bosch,bmc150_magn.yaml index cdef7aeba7..2867ab6bf9 100644 --- a/dts/Bindings/iio/magnetometer/bosch,bmc150_magn.yaml +++ b/dts/Bindings/iio/magnetometer/bosch,bmc150_magn.yaml @@ -30,6 +30,9 @@ properties: reg: maxItems: 1 + vdd-supply: true + vddio-supply: true + interrupts: maxItems: 1 diff --git a/dts/Bindings/iio/magnetometer/ti,tmag5273.yaml b/dts/Bindings/iio/magnetometer/ti,tmag5273.yaml new file mode 100644 index 0000000000..121d540b7b --- /dev/null +++ b/dts/Bindings/iio/magnetometer/ti,tmag5273.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/magnetometer/ti,tmag5273.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor + +maintainers: + - Gerald Loacker <gerald.loacker@wolfvision.net> + +description: + The TI TMAG5273 is a low-power linear 3D Hall-effect sensor. This device + integrates three independent Hall-effect sensors in the X, Y, and Z axes. + The device has an integrated temperature sensor available. The TMAG5273 + can be configured through the I2C interface to enable any combination of + magnetic axes and temperature measurements. An integrated angle calculation + engine (CORDIC) provides full 360° angular position information for both + on-axis and off-axis angle measurement topologies. The angle calculation is + performed using two user-selected magnetic axes. + +properties: + compatible: + const: ti,tmag5273 + + reg: + maxItems: 1 + + "#io-channel-cells": + const: 1 + + ti,angle-measurement: + $ref: /schemas/types.yaml#/definitions/string + description: + Enables angle measurement in the selected plane. + If not specified, "x-y" will be anables as default. + enum: + - off + - x-y + - y-z + - x-z + + vcc-supply: + description: + A regulator providing 1.7 V to 3.6 V supply voltage on the VCC pin, + typically 3.3 V. + + interrupts: + description: + The low active interrupt can be configured to be fixed width or latched. + Interrupt events can be configured to be generated from magnetic + thresholds or when a conversion is completed. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@35 { + compatible = "ti,tmag5273"; + reg = <0x35>; + #io-channel-cells = <1>; + ti,angle-measurement = "x-z"; + vcc-supply = <&vcc3v3>; + }; + }; +... diff --git a/dts/Bindings/iio/magnetometer/yamaha,yas530.yaml b/dts/Bindings/iio/magnetometer/yamaha,yas530.yaml new file mode 100644 index 0000000000..877226e921 --- /dev/null +++ b/dts/Bindings/iio/magnetometer/yamaha,yas530.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/magnetometer/yamaha,yas530.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Yamaha YAS530 family of magnetometer sensors + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: + The Yamaha YAS530 magnetometers is a line of 3-axis magnetometers + first introduced by Yamaha in 2009 with the YAS530. They are successors + of Yamaha's first magnetometer YAS529. Over the years this magnetometer + has been miniaturized and appeared in a number of different variants. + +properties: + $nodename: + pattern: '^magnetometer@[0-9a-f]+$' + + compatible: + items: + - enum: + - yamaha,yas530 + - yamaha,yas532 + - yamaha,yas533 + - yamaha,yas535 + - yamaha,yas536 + - yamaha,yas537 + - yamaha,yas539 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: The YAS530 sensor has a RSTN pin used to reset + the logic inside the sensor. This GPIO line should connect + to that pin and be marked as GPIO_ACTIVE_LOW. + + interrupts: + maxItems: 1 + description: Interrupt for INT pin for interrupt generation. + The polarity, whether the interrupt is active on the rising + or the falling edge, is software-configurable in the hardware. + + vdd-supply: + description: An optional regulator providing core power supply + on the VDD pin, typically 1.8 V or 3.0 V. + + iovdd-supply: + description: An optional regulator providing I/O power supply + for the I2C interface on the IOVDD pin, typically 1.8 V. + + mount-matrix: + description: An optional 3x3 mounting rotation matrix. + +allOf: + - if: + not: + properties: + compatible: + items: + const: yamaha,yas530 + then: + properties: + reset-gpios: false + + - if: + properties: + compatible: + items: + const: yamaha,yas539 + then: + properties: + interrupts: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c-0 { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@2e { + compatible = "yamaha,yas530"; + reg = <0x2e>; + vdd-supply = <&ldo1_reg>; + iovdd-supply = <&ldo2_reg>; + reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; + interrupts = <13 IRQ_TYPE_EDGE_RISING>; + }; + }; + + i2c-1 { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@2e { + compatible = "yamaha,yas539"; + reg = <0x2e>; + vdd-supply = <&ldo1_reg>; + }; + }; |