diff options
Diffstat (limited to 'dts/Bindings/iio/potentiostat/lmp91000.txt')
| -rw-r--r-- | dts/Bindings/iio/potentiostat/lmp91000.txt | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/dts/Bindings/iio/potentiostat/lmp91000.txt b/dts/Bindings/iio/potentiostat/lmp91000.txt new file mode 100644 index 0000000000..b9b621e94c --- /dev/null +++ b/dts/Bindings/iio/potentiostat/lmp91000.txt @@ -0,0 +1,30 @@ +* Texas Instruments LMP91000 potentiostat + +http://www.ti.com/lit/ds/symlink/lmp91000.pdf + +Required properties: + + - compatible: should be "ti,lmp91000" + - reg: the I2C address of the device + - io-channels: the phandle of the iio provider + + - ti,external-tia-resistor: if the property ti,tia-gain-ohm is not defined this + needs to be set to signal that an external resistor value is being used. + +Optional properties: + + - ti,tia-gain-ohm: ohm value of the internal resistor for the transimpedance + amplifier. Must be 2750, 3500, 7000, 14000, 35000, 120000, or 350000 ohms. + + - ti,rload-ohm: ohm value of the internal resistor load applied to the gas + sensor. Must be 10, 33, 50, or 100 (default) ohms. + +Example: + +lmp91000@48 { + compatible = "ti,lmp91000"; + reg = <0x48>; + ti,tia-gain-ohm = <7500>; + ti,rload = <100>; + io-channels = <&adc>; +}; |